Category Archives: Regulators

Kegland MK4 Two Pressure Regulator – on sale for… $82.99

Kegland MK4 Twin Gas Regulator

More Info

From the product description, check product page for current description, price and availability:

The MK4 Dual Pressure Regulator by KegLand provides a reading of keg dispensing pressure, as well as an accurate indication of cylinder gas level. By turning the center knob, you can adjust the dispensing pressure from 0 – 90 PSI. The MK4 features gauges housed in rubber to protect them from dings, as well as a large 2½” diameter diaphragm so it can both handle several kegs at once if needed, and the large diaphragm also lets you have precise control over the dispensing pressure (which you adjust with the center knob). This model has two bodies, so you can have two different dispensing pressures out of one C02 Cylinder.

Includes ¼” male flare outlets and Z93 8mm Duotight tubing adapters so you can connect either traditional threaded ¼” gas lines or 8mm Duotight tubing. Includes a safety relief valve, but does not have a check valve built into the bottom inlet. This regulator includes two nylon tank sealing washers, and will accept nylon or fiber tank sealing washers.

The high pressure gauge threads are traditional right hand, as are the threads for the lower flare outlet fitting.11½” long, this regulator needs to be attached to a C02 tank that is firmly secured to prevent it from falling over for safety.

This is a multi gas regulator, and can be used with nitrogen gas tanks if you purchase optional adapter D15.

If you want to convert this to accept 5/16″ inner diameter gas tubing (common in older kegerators), you will also need to order item D87 Concave Washer and item D08 5/16″ Swivel Barb fitting for each outlet.


 

A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

MK4 Twin Gas Regulator

  • For a short time William’s Brewing is discounting their entire lineup of CO2 regulators and accessories by 15%.
  • No coupon code is required. Discounted prices show up in cart.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

William’s Brewing Regulator Sale

The MK4 two pressure regulator is included in the mix and just $82.99 at checkout with the sale.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

William’s Brewing Regulator Sale!

  • For a short time William’s Brewing is discounting their entire lineup of CO2 regulators and accessories by 15%.
  • No coupon code is required. Discounted prices show up in cart.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

William’s Brewing Regulator Sale

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

20% Off GovReg Commercial Quality Inline Secondary Regulators

govreg secondary regulators

Gov Reg In line Secondary via Keg Connection

More Info

From the product description, check product page for current description, price and availability:

The new Gov RegTM Inline Secondary Pressure Regulator will greatly minimize install time and wasted beer, ensuring an ideal pour every time! Since it requires the adjuster tool, you can set the desired pressure once and not worry about changing pressures or people messing with your set pressure. The Gov Reg is great for use in short draw & long draw beer delivery systems, kegs in series, wine on tap, and soda soft drink pressurized delivery systems.

Note: Product requires Adjuster Tool in order to set desired pressure


 

This allows you to set one pressure per line to assist with

serving beers at different carbonation levels.  Note that you do need a tool (linked on the product page) to set this.  You may also need an adapter to interface with homebrew style lines, also linked on the product page.  It’s kind of tough to tell from the photo how large this is.  For some size perspective, check out the photo on the right.  The Gov Reg is installed on the Sanke.  Check product page for current price and availability.

Gov Reg In line Secondary

What’s the difference between this and Kegland’s Inline Secondary?  The GovReg costs more than the Kegland Inline Secondary, although it’s still economical compared to multi-bodied regulators. The biggest difference is going to be that GovReg is a heavy duty commercial quality solution.

20% Off w/Stacking Deals!

  • For a limited time, Keg Connection is discounting most things site wide by 15%.
  • No coupon code required, discounted prices are reflected on at product pages.
  • This is a rare sale…  Keg Connection rarely does sitewide sales.
  • Save ANOTHER 5%… HBF Readers Save More!  Coupon code HBF5OFF saves you another 5%.
  • Flat Rate Shipping: Keg Connection’s Flat Rate Shipping PromotionYour entire order ships for one flat rate, no matter how much you order, to addresses in the contiguous US.

15% Off at Keg Connection!  – remember to use coupon code HBF5OFF to get another 5% off!

Hands on Review

Hands on Review: ITW Gov Reg – Inline Secondary Regulator by ITW Pressure Regulator Technologies

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

keg deals
kegdeals

keg deals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Announcing: Duotight Mini CO2 Regulator!

Duotight Mini CO2 Regulator | 16g & 74g Cartridge Compatible | 6.35mm Duotight Compatible

About DuoTight: Kegland’s DuoTight Fittings are designed to work with EVABarrier Double Wall Tubing.  They offer quick, reliable connections, easy implementation, a variety of fitting options and feature amazing versatility.  They’re also, generally speaking, very well priced.  DuoTights are push to connect fittings and require no tubing clamps. Check out my extensive Hands on Review

Announcing: Duotight Mini CO2 Regulator


  • Perfect for home use with compact keg setups or on the go for mobile dispensing
  • Compatible with both 16g and 74g CO2 cartridges
  • Features a 6.35mm Duotight-compatible barb for fast, hassle-free keg attachments

The Duotight Mini CO2 Regulator is a simple, affordable choice for mini kegs and Oxebar keg setups. This compact regulator is designed to work with both 16g and 74g CO2 cartridges, making it ideal for home use or when you’re on the go.

With the 6.35mm Duotight-compatible barb you can connect just about anything within a matter of seconds. Simply pair it with the 6.35mm Duotight Ball Lock QD for a quick and hassle-free connection to your kegs. Or, with the Duotight Reducer, you can adapt the regulator for use with the most common and widely used 8mm Duotight accessories.

For additional protection against liquid backflow, you can integrate a check valve along with some hosing to safeguard your regulator. Please note if liquid enters the regulator, it’s no longer functional. Be extremely careful with overfilling your kegs or tipping them over when the gas has run out.

The regulator is capped at 30 psi to ensure you do not accidentally over carbonate or exceed your keg’s pressure rating. The gauge reads up to 60 psi to account for potential heat expansion so that it does not break the gauge.

Suitable Gas Cartridges:

KegLand Part Number: KL42000


Duotight Mini CO2 Regulator | 16g & 74g Cartridge Compatible | 6.35mm Duotight Compatible KEG971

I Recommend These for DuoTight Fittings!

duotightclips

Continue reading

SPARC Premium TRIPLE Pressure CO2 Regulator [multiple carbonation levels and more]

SPARC Premium Triple Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha

SPARC Premium Triple Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha

More Info

Highlighted Features
  • EASY INSTALLATION ✔ All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 3 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal.
  • PROFESSIONAL GRADE ✔ This CO2 regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure on both outputs via individual control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety pressure relief valve (PRV) / and individual shutoff valves on each output.
  • VERSATILE APPLICATIONS ✔ Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed gas outlet fittings included for 5/16" through 3/8" hoses and tubing, allowing for an easy connection to many gas line types.
  • HEAVY DUTY WITH 4 GAUGES ✔ SPARC 2 Stage CO2 Pressure Regulators are a heavy duty piece made with triple gauges to accurately measure working pressure in 3 systems simultaneously and 1 gauge showing CO2 tank pressure. 0-3000PSI input pressure (gauge reads 0-3500PSI) and 0-60PSI output pressure (gauge reads 0-80PSI).
  • WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail.

 

Why a THREE pressure regulator?  A three pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

SPARC Premium Triple Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

What’s the difference between Primary and Secondary CO2 Regulators?

Ball Lock Mini CO2 Gas Regulator

Keg Charger Dispenser, 0-60 PSI Keep Stable Pressure Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation Portable Mini CO2 Regulator 7/16-20 UNF Brass Adapter Gas Ball Lock Disconnect

Mini CO2 Regulator

More Info


Highlighted Features
  • Adjust Pressure Accurately: this is a compact regulated co2 keg charger which features a pressure adjustment knob, small but enough to accommodate very small pressure gauge, no need to worry about pressing on the keg charger too much or too little like the trigger, easy to adjust with the pressure adjustment knob, provides a right carbonation value to your beer!
  • Great Anti-Leaks and Practical Installation Lever Wrench: there is a sealing washer inside the inside diameter 7/16-20 UNF thread brass adapter to prevent gas leaks from the connection between the brass adapter and ball lock, you can remove the brass adapter to the mini keg charger with using the lever wrench, the quick disconnect gas ball lock is easy to be attached to and removed from the keg co2 regulator, creates a quality beer system for you!
  • Anti-Damage Bottom Design and Anti-Rust: MRbrew mini co2 keg charger is made from unique anodised aluminium, strongly against rust, smooth surface makes cleaning easy. a built-in metal thread ring in the co2 keg charger bottom can prevent the bottom from being damaged by installation turning. small enough to be portable, no need to drag the big tank with, you can carbonate your beverage any time and any where!
  • Suitable for Various Occasions: the unique body will buffer the pressure and make the co2 gas flow steadily preventing the body damage, this keg charger regulator fits the 2L, 3.6L, 5L beer growler, suitable for 16g co2 cartridge, allows you to serve your home brew beer, cold brew coffee, soda water, iced tea on barbecue, beach, lake or holiday parties, other outdoor activities, brings big convenience to your mobile kegging.
  • Easy to Install and 100% Lifelong Issues Solving for You: the installation is a breeze, install brass adapter connector to ball lock, attach mini keg regulator to ball lock, attach keg regulator to keg and install 16g co2 cartridge, set the carbonation pressure with pressure adjustment knob. each MRbrew mini co2 keg charger regulator is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!

 

Use to serve your keg of homebrew on the go or as a backup in case you run out of CO2.  The good thing about this style of regulator as compared to the handheld injector style is that you can actually set a pressure and forget it.

MRbrew Keg Charger Dispenser, 0-60 PSI Keep Stable Pressure Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation Portable Mini CO2 Regulator 7/16-20 UNF Brass Adapter Gas Ball Lock Disconnect– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Portable Draft Beer Serving Options!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Ball Lock Mini CO2 Gas Regulator 0 to 60 PSI + Portable Serving Resource Post

Dbgogo Hold Stable Pressure 0-60 PSI Mini Keg Regulator, No Leaking Portable Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation CO2 Gas Ball Lock Disconnect keg Charger Dispenser Kit

Mini CO2 Regulator

More Info


Highlighted Features
  • New version gets rid of bad performance: compared to other brand single-stage keg charger, this mini keg charger regulator will buffer and stabilize the pressure transferring speed to prevent the gauge damage caused by sudden high pressure, the pressure holding performance can be comparable to the dual-stage mini keg charger! compared to traditional keg charger without pressure gauge and adjustment knob, this mini regulator allows you to read pressure clearly and set a suitable carbonated value.
  • Anti-damage design and pressure adjustment knob safety design: there is a built-in metal thread ring in the mini co2 regulator bottom to prevent the bottom from being worn and damaged by the installation turning. there is a pressure adjustment knob on the top of the mini keg regulator, you can decrease pressure value by turning the pressure adjustment knob towards DECREASE direction during working process to keep user and gauge safe.
  • No leaks and quality material: the ball lock tip is designed with a sealing o-ring to guarantee a tight connection between ball lock and brass connector, which will avoid the gas leaks effectively. we also provide a spare ball lock tip white sealing washer for replacement. this mini keg charger is made of anodised aluminium, not easy to get rusted, smooth body is easy to wipe out to clean.
  • A useful lever wrench for installation: mini keg co2 regulator is easy to install for using. install a small co2 bottle to the regulator bottom first, fix the brass connector to the regulator by using and turning lever wrench clockwise secondly, then connect the gas ball lock to the co2 regulator and attach this keg charger kit to your beer keg, set your carbonated pressure by pressure adjustment knob finally. turning the adjustment knob towards INCREASE means that you are turning on keg charge
  • Portable and perfect for being used at various activities: this mini and compact mini keg regulator is compatible with 16g cartridge, can be applied to 2L, 3.6L, 5L beer growler keg, allows you to dispense beer, cold brew coffee, soda water, iced tea on barbecue, beach, lake, holiday parties, and other outdoor events. no need to take the large system co2 tank, this light and small beer carbonation equipment lets you enjoy tasty drinking anytime and anywhere.

 

Use to serve your keg of homebrew on the go or as a backup in case you run out of CO2.  The good thing about this style of regulator as compared to the handheld injector style is that you can actually set a pressure and forget it.

Dbgogo Hold Stable Pressure 0-60 PSI Mini Keg Regulator, No Leaking Portable Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation CO2 Gas Ball Lock Disconnect keg Charger Dispenser Kit – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Portable Draft Beer Serving Options!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B09NJN3Q9K:ptr

SPARC Premium TRIPLE Pressure CO2 Regulator (multiple carbonation levels and more)

SPARC Premium Triple Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha

SPARC Premium Triple Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha

More Info


Highlighted Features
  • EASY INSTALLATION ✔ All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 3 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal.
  • PROFESSIONAL GRADE ✔ This CO2 regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure on both outputs via individual control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety pressure relief valve (PRV) / and individual shutoff valves on each output.
  • VERSATILE APPLICATIONS ✔ Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed gas outlet fittings included for 5/16" through 3/8" hoses and tubing, allowing for an easy connection to many gas line types.
  • HEAVY DUTY WITH 4 GAUGES ✔ SPARC 2 Stage CO2 Pressure Regulators are a heavy duty piece made with triple gauges to accurately measure working pressure in 3 systems simultaneously and 1 gauge showing CO2 tank pressure. 0-3000PSI input pressure (gauge reads 0-3500PSI) and 0-60PSI output pressure (gauge reads 0-80PSI).
  • WE'VE GOT YOUR BACK ✔ Backed by our rock-solid 2 year warranty against manufacturing defects. We are based out of Denver, CO and offer customer service and support via phone, text, and e-mail.

 

Why a THREE pressure regulator?  A three pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

SPARC Premium Triple Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

What’s the difference between Primary and Secondary CO2 Regulators?

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Vevor Two Pressure CO2 Regulator – multiple carbonation levels and more… on sale for $63.99 + free shipping

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.

 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

9/26 9:30 AM Central: This is on sale for just $63.99. Shipping is also free to many US addresses. Prices and availability can change quickly.  Check product page for current info – More About Prices

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Great for Tailgates!… Using a Keg as a CO2 Source for Portable Serving!

This technique uses an economical inline secondary regulator to utilize a spare keg (or growler)as a CO2 source to serve a keg. I’m not suggesting this setup as a replacement for your kegerator CO2 tank.  You still need a standard CO2 tank. What this setup could be very useful for is as a replacement for those expensive little regulators or injectors and expensive (considering how much CO2 you get) little CO2 cartridges. One inexpensive purchase allows you to pressurize and serve your keg on the go for little to nothing.

Side Note: I’ve wanted to do this for years.  There used to be a commercial sanke keg that had two chambers.  One was used as a pressure chamber and the other held beer.  I always wanted one of those.  The problem was that it was extremely expensive and I just couldn’t justify the expense. This magic little secondary regulator makes something similar easily possible.

The Hardware That Makes This Possible…

Kegland’s economical inline secondary regulators! As of this update there are three versions

Related: Hands on Review: Kegland Inline Secondary Regulator


This article contains affiliate links. We may make a small percentage if you use our links to make a purchase. You won’t pay more and you’ll be supporting Homebrew Finds and more content like this. Thank you for your support!


Upgrade to Digital!

Kegland has released a digital gauge option that works with their great inline secondary regulator and BlowTie Spunding Valve.  They have also released a DuoTight version.

Primary intended Use… Multi-Pressure Serving

Maintaining multiple CO2 pressures in your kegerator gives you the ability to… keep kegs at different pressures.  This is a requirement to maintain different carbonation levels. It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

Continue reading

Ball Lock Mini CO2 Gas Regulator 0 to 60 PSI – $21.49, best price + Portable Serving Resource Post

Dbgogo Hold Stable Pressure 0-60 PSI Mini Keg Regulator, No Leaking Portable Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation CO2 Gas Ball Lock Disconnect keg Charger Dispenser Kit

Mini CO2 Regulator

More Info


Highlighted Features
  • New version gets rid of bad performance: compared to other brand single-stage keg charger, this mini keg charger regulator will buffer and stabilize the pressure transferring speed to prevent the gauge damage caused by sudden high pressure, the pressure holding performance can be comparable to the dual-stage mini keg charger! compared to traditional keg charger without pressure gauge and adjustment knob, this mini regulator allows you to read pressure clearly and set a suitable carbonated value.
  • Anti-damage design and pressure adjustment knob safety design: there is a built-in metal thread ring in the mini co2 regulator bottom to prevent the bottom from being worn and damaged by the installation turning. there is a pressure adjustment knob on the top of the mini keg regulator, you can decrease pressure value by turning the pressure adjustment knob towards DECREASE direction during working process to keep user and gauge safe.
  • No leaks and quality material: the ball lock tip is designed with a sealing o-ring to guarantee a tight connection between ball lock and brass connector, which will avoid the gas leaks effectively. we also provide a spare ball lock tip white sealing washer for replacement. this mini keg charger is made of anodised aluminium, not easy to get rusted, smooth body is easy to wipe out to clean.
  • A useful lever wrench for installation: mini keg co2 regulator is easy to install for using. install a small co2 bottle to the regulator bottom first, fix the brass connector to the regulator by using and turning lever wrench clockwise secondly, then connect the gas ball lock to the co2 regulator and attach this keg charger kit to your beer keg, set your carbonated pressure by pressure adjustment knob finally. turning the adjustment knob towards INCREASE means that you are turning on keg charge
  • Portable and perfect for being used at various activities: this mini and compact mini keg regulator is compatible with 16g cartridge, can be applied to 2L, 3.6L, 5L beer growler keg, allows you to dispense beer, cold brew coffee, soda water, iced tea on barbecue, beach, lake, holiday parties, and other outdoor events. no need to take the large system co2 tank, this light and small beer carbonation equipment lets you enjoy tasty drinking anytime and anywhere.

 

Use to serve your keg of homebrew on the go or as a backup in case you run out of CO2.  The good thing about this style of regulator as compared to the handheld injector style is that you can actually set a pressure and forget it.

As of this update these are selling for just $21.49. That’s the best historical third party Amazon price I found, notwithstanding Lightning Deals or coupons. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly Check product page for current info – More About Prices

Dbgogo Hold Stable Pressure 0-60 PSI Mini Keg Regulator, No Leaking Portable Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation CO2 Gas Ball Lock Disconnect keg Charger Dispenser Kit – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Portable Draft Beer Serving Options!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B09NJN3Q9K:anchor

What’s the difference between Primary and Secondary CO2 Regulators? Something You May Not Have Considered

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)Pictured: VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

July 4, 2024

In the context of homebrewing or serving beer, a CO2 regulator hooks up to a compatible CO2 tank and steps down the pressure to carbonate and serve the beer properly. See: Balancing Your Kegerator Draft System  and Diagnosing and Fixing Kegerator Foam Problems

Single Body vs Multi Body Regulators

A typical CO2 regulator provides a single output pressure. It usually has two gauges, one for the high pressure side and one for the low pressure side, although it can have a single gauge. A multi-body regulator, provides multiple output pressures and typically has one high side gauge and one gauge for each serving pressure.


Get a Regulator!

Continue reading

Taprite Two Product WYE’d Kegerator CO2 Regulator

Taprite WYE'd Dual Check Valves Beer Regulator - Draft Beer and Homebrew Keg Co2 Cylinder Tank Pressure Regulator and Gauge

Taprite WYE’d Dual Check Valves Beer Regulator – Draft Beer and Homebrew Keg Co2 Cylinder Tank Pressure Regulator and Gauge

More Info


Highlighted Features
  • COMMERCIAL GRADE REGULATOR - This CO2 regulator for homebrew or draft beer kegerator is a commercial grade beer regulator that is used by professional installers in bars and restaurants. This CO2 tank regulator lets get a professional quality beer at the comfort of your home!
  • DURABLE AND MADE TO LAST - Taprite WYE'd Dual Check Valves Beer Regulator is made with high-quality materials to ensure your CO2 regulator is durable and made to last for years. This keg pressure regulator's high-grade components make it perfect for home or commercial use!
  • SMOOTH PRESSURE CHANGE - Changing the pressure is very smooth and easy with Taprite WYE'd Dual Check Valves Beer Regulator. As you turn each valve, the pressure gradually increases or lowers, making it much easier to calibrate the output pressure to your desired level.
  • REBUILD KITS AVAILABLE - Our Beer CO2 Regulator with WYE have rebuild kit available so you won't have to get a whole new replacement if some parts eventually wore out. The beer regulator's worn or broken parts and equipment such as the nipples, valve, and gauge are easy to configure, replace and fix!
  • BUILT IN SEAL TO PREVENT LEAKS - With this draft beer dispenser CO2 regulator, there is no need to use a washer because the rubber O-ring seal is built-in that prevents leaks from the cylinder tank to the keg. This regulator also includes dual outlet valves to separate shutoffs for each line of your homebrew.

 

As of this posting, Taprite products are Made in the USA.  See: About on Taprite’s Website for current information regarding country of origin.  Print screen 8/8/17

Taprite WYE’d Dual Check Valves Beer Regulator – Draft Beer and Homebrew Keg Co2 Cylinder Tank Pressure Regulator and Gauge  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

What’s the difference between Primary and Secondary CO2 Regulators?

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)Pictured: VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

July 4, 2024

In the context of homebrewing or serving beer, a CO2 regulator hooks up to a compatible CO2 tank and steps down the pressure to carbonate and serve the beer properly. See: Balancing Your Kegerator Draft System  and Diagnosing and Fixing Kegerator Foam Problems

Single Body vs Multi Body Regulators

A typical CO2 regulator provides a single output pressure. It usually has two gauges, one for the high pressure side and one for the low pressure side, although it can have a single gauge. A multi-body regulator, provides multiple output pressures and typically has one high side gauge and one gauge for each serving pressure.


Get a Regulator!

Continue reading

VEVOR Two Pressure Kegerator CO2 Regulator

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.

 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

VEVOR Two Pressure Kegerator CO2 Regulator

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.

 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ball Lock Mini CO2 Gas Regulator 0 to 60 PSI by Luckeg

LUCKEG Mini keg CO2 Regulator 0-60 PSI Carbonation Portable Beer Keg Charger CO2 Dispense with 3/8" Thread and Gas Ball Lock Disconnect for Cornelius Corny Beer Growler Outdoor Picnic Party

Mini CO2 Regulator

More Info



 

Use to serve your keg of homebrew on the go or as a backup in case you run out of CO2.  The good thing about this style of regulator as compared to the handheld injector style is that you can actually set a pressure and forget it.

LUCKEG Mini keg CO2 Regulator 0-60 PSI Carbonation Portable Beer Keg Charger CO2 Dispense with 3/8″ Thread and Gas Ball Lock Disconnect for Cornelius Corny Beer Growler Outdoor Picnic Party – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Portable Draft Beer Serving Options!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

VEVOR Two Pressure Kegerator CO2 Regulator

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.

 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:watch1

VEVOR Two Pressure Kegerator CO2 Regulator

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator)

More Info


Highlighted Features
  • Adjustable Range: The pressure range of the gas meter is adjustable from 0 to 60 PSI, allowing you to freely adjust the intake pressure of carbon dioxide gas, thus controlling the foaming texture of beer and ensuring that the beer-making process and results meet your needs and expectations.
  • Pressure Stability: The pressure relief valve autonomously adjusts the pressure to release at 65 PSI, preventing pressure relief under low pressure. This detail design ensures the quality and quantity of the brewed beer, without being affected by pressure issues.
  • Leak-proof: The gas meter comes with gaskets and clamps, both of which help you secure the gas meter to the beer keg and prevent gas leakage. This design guarantees the stability and reliability of the gas meter.
  • Versatile Compatibility: The carbon dioxide gas meter interface standard is CGA320, compatible with hose calibers of 8mm, making it compatible with various beer kegs. The installation is simple and quick, making your beer-making process more convenient.
  • Backflow Prevention: The gas meter is equipped with a check valve to prevent beer from flowing back due to pressure issues. This design ensures a smoother and more stable beer-making process while also maintaining the cleanliness of the beer keg.

 

Why a two pressure regulator?  A two pressure regulator gives you the ability to keep kegs at different pressures.  This is a requirement to maintain two distinct carbonation levels.  It’s also handy if you want to force carbonate a keg more quickly, at a higher pressure, while maintaining your standard serving pressure on a keg that’s already being served or if you want to have a utility line for purging kegs and such.

VEVOR CO2 Regulator Gauge with 0-60PSI, Heavy Duty CO2 Gauge Gas System, Draft Beer Regulator with Check Valve, Adjustable Pressure Regulator for Draft Beer Homebrew (Triple Gauge Regulator) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Ball Lock Mini CO2 Gas Regulator 0 to 60 PSI by Luckeg

LUCKEG Mini keg CO2 Regulator 0-60 PSI Carbonation Portable Beer Keg Charger CO2 Dispense with 3/8" Thread and Gas Ball Lock Disconnect for Cornelius Corny Beer Growler Outdoor Picnic Party

Mini CO2 Regulator

More Info



 

Use to serve your keg of homebrew on the go or as a backup in case you run out of CO2.  The good thing about this style of regulator as compared to the handheld injector style is that you can actually set a pressure and forget it.

LUCKEG Mini keg CO2 Regulator 0-60 PSI Carbonation Portable Beer Keg Charger CO2 Dispense with 3/8″ Thread and Gas Ball Lock Disconnect for Cornelius Corny Beer Growler Outdoor Picnic Party – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Portable Draft Beer Serving Options!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon