About My Kegerator:
- My kegerator based on a 7-ish cubic foot Kenmore chest freezer.
- I’ve installed a 10″ collar that hosts four faucets. I’ve also used the collar as a mounting point for my four way CO2 manifold.
- I have a dual pressure CO2 regulator. One regulator body maintains what I call a house pressure, 10 PSI. That body feeds the manifold and the manifold, in turn, feeds each keg. The second regulator body is for tasks like flushing kegs, force carbonating more quickly or for a keg that I want to serve at a different carbonation level.
- The gas side of my setup is QD based. I can swap out or remove lines without turning off the CO2 tank. The valved disconnects automatically shut off CO2 flow when disconnected.
- I use a recirculating fan to keep a more uniform temperature. See: Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
- I use an Eva-Dry E-500 to fix condensation – See: Damp Kegerator? Fix Kegerator Condensation
About the Upgrades
- I had been using a temperature controller from a now defunct manufacturer for a while. The upgrade brings a new Inkbird C909 into the mix. That model was attractive because I’ve been extremely happy with Inkbird’s gear and I really like the fact that it plugs directly into an AC socket. The wall I now have my kegerator on has no studs to mount a controller. Because this is an Outlet Thermostat, the C909 solves that. See – Hands on Review: Inkbird C909 1,500 Watt Digital Temperature Controller
- Inkbird Temperature & Humidity Smart Sensor IBS-TH1 – my previous controller, had the ability to log temperatures and I really liked that. I added this to give me logging capabilities.
- Intertap Faucets and Accessories! – time to modernize my setup with these great faucets and accessories. NukaTap Faucets (Intertap v2!) are also a great choice.
- DuoTight Fittings – DuoTight Fittings work in concert with EVABarrier tubing. This system of disconnects offers loads of flexiblity and features. I’ve used multiple types of disconnect systems in previous versions of my kegerator and DuoTights are, by far, my choice.
- EVABarrier Tubing – This is an update to… this update. This post originally featured Ultra Barrier coiled tubing. That tubing was very expensive and has since become difficult to find. EVABarrier tubing is high-quality double walled tubing that offers protection against oxidation, CO2 loss and microbial growth. It’s BPA and PVC free. EVABarrier is also very reasonably priced.
- San Jamar VM5280 Versa-Mat Interlocking Bar Mat, 12″ Length x 12″ – also available in different colors and quantities – search san jamar interlocking bar bat on Amazon – for the bottom of the kegerator. I had already used a single square of this to set the CO2 tank on. This upgrade including lining the entire bottom with this great mat. Related: Not Just for Bars Anymore… Using Interlocking Bar Mats Around Your Home Brewery!
Bonus Upgrade! Rebuild Your Kegs!
Installing the Upgrades
1. Installing the Temperature Controller
Getting the C909 going is about as simple as it gets. I swapped out the cords, set the controller how I wanted it and installed the probe.It has been my practice to install my kegerator temperature probe using zip ties onto a can of beer. See: Kegerator Temperature Probe Placement – To Immerse or Not To Immerse? – three tests to determine optimal placement
2. Installing the Temperature Logger
The Inkbird Temperature Logger took all of 30 seconds to install. A couple minutes more to download the app and sync it with the device. The temperature probe lives happily zip tied to that same can of beer.
3. Upgrading to Intertaps!
For the faucets, I removed the old Perlicks and pulled out all of the liquid lines.Here is the new Intertap on the right and the old Perlick (525SS) on the left. I chose the stainless steel forward sealing model. All Intertaps are forward sealing. They are available in chrome, brass and stainless.One of the cool things about Intertaps is that they are designed to be used with several accessories. Here is the Intertap with a stout nozzle installed. The Perlick continues to look the same :).Here is the Intertap with a growler filling attachment installed. I need to add some 1/2″ ID tubing to this to actually use it for filling up a growler.Here is the Intertap with a ball lock attachment installed.All four faucets upgraded to Intertaps. I have limited experience with these as of this post, but first impressions are very positive. Beautifully built faucets, thoughtful and helpful accessories and these things feel rock solid with you’re operating them. Very smooth operation. They are also some of the most reasonably priced faucets on the market. I think these are a game changer in the world of faucets.
4. Upgrading to DuoTights!
Old setup. Each shank required a beer nut, tail piece, tubing clamp and piece of tubing. In my case I had small sections of tubing and then QDs to attach beer lines.DuoTight Female Beer Thread Fittings – replaces beer nut, tail piece and tubing.Installed! One well thought out fitting to replace three.All four taps converted to DuoTight. You can see the edges of my Intertap Faucets at the top of this photo – Hands on Review
5. Installing EVABarrier
This upgrade is as simple as installing the correct fittings and connecting them with proper lengths of tubing. One of the great things about the DuoTight system is that you don’t need a manifold. You can install as many tees as you want and keep adding kegs. I recommend using a gas QD with check valve. This picture shows a CMBecker QD with check valve. The integrated check valve stops beer from back-flowing into gas lines. Keg Connection carries both pin lock and ball lock CM Becker brand QDs. Look for an MFL version to work with DuoTight fittings. Three kegs installed without a manifold using DuoTights and EVABarrier Tubing. Related: Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier TubingComplete setup – DuoTight Fittings and EVBarrier Tubing installed in my kegerator
6. Installing San Jamar Mats
Drying mat installed. I already used one square of this for my CO2 tank. This is two full 12″ x 12″ panels and two trimmed panels. I trimmed using a utility knife. The panels are designed so they attach to each other. These help increase airflow under the kegs and should help with keeping temperatures more uniform and keep moisture from getting caught under kegs. Related: Not Just for Bars Anymore… Using Interlocking Bar Mats Around Your Home Brewery!
That’s it! Several great upgrades and a couple hours of fun putting it altogether!
- Inkbird C909 – via Amazon Hands on Review: Inkbird C909 1,500 Watt Digital Temperature Controller
- Inkbird Temperature & Humidity Smart Sensor IBS-TH1 – via Amazon
- San Jamar VM5280 Versa-Mat Interlocking Bar Mat, 12″ Length x 12″ – also available in different colors and quantities – search san jamar interlocking bar bat on Amazon – Related: Not Just for Bars Anymore… Using Interlocking Bar Mats Around Your Home Brewery!
DuoTight and EVABarrier
- Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
- Kegland DuoTight Fittings and Accessories! at William’s Brewing
- DuoTight Push In Fittings & EVABarrier Double Wall Draft Tubing at MoreBeer
- Build a DuoTight CO2 Gas Manifold! – for Kegland EVABarrier Tubing
- Intertap Faucets and Accessories at MoreBeer
- Intertap Faucets and Accessories at Adventures in Homebrewing
- Intertap Stainless Steel Faucet at Amazon
- Search Amazon for “Intertap Faucet” – offerings vary
- Intertap Faucets and Accessories at Keg Connection
- Intertap Faucets and Accessories at William’s Brewing
- Intertap Hands on Review
- Nukatap Faucets and Accessories at MoreBeer
- Nukatap Faucets and Accessories at Adventures in Homebrewing
- Nukatap Faucets and Accessories at William’s Brewing
- NukaTap Hands on Review
Bonus Upgrade! – Rebuild Your Kegs!
More Homebrew Finds!
- Last 50 Finds!
- Top Deals – a curated list of the best deals
- Homebrew Reviews – one of the largest libraries of homebrew reviews in existence!
- Our Top Posts – tips, how-tos, resources posts and more
- Let’s be Friends!
10 Most Recent Homebrew Resource Posts & How-To’s!
We are Homebrew Review HQ! Our 10 Most Recent Reviews
Our Top Draft Resources!
- Rebuilding & Reconditioning Homebrew Kegs!
- Food Safe Replacement Keg O-Rings in Bulk
- Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
- Why Won’t My Homebrew Carbonate? Fixing Beer Carbonation Problems
- Kegerator Foam Problems? – Fight the First Foamy Pint!
- Upgrade Your Kegerator – 6 Improvements!
- Serve Homebrew & Sanke Kegs on Any Kegerator
- Recent Homebrew Keg Finds
- Tips and Gear for Growler Filling
- What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
- Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
- Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
- Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
- Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Clea…
- Step by Step: Finding and Fixing Keg CO2 Leaks
- Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
- Kegging CO2 Use Estimations and Calculations
- Step by Step: Balancing Your Kegerator Draft System
- Build a Recirculating Draft Line Cleaning Pump
- Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
- Damp Kegerator? Fix Kegerator Condensation
- Portable Draft Beer Serving Options!
- Homebrew Temp Controller Roundup! – Kegerator and Fermentation – con…
- Bulk Keg Orings and Keg Repair Part Numbers
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. toppost:kegeratorupgrades tag:tpr rs:4