Vacuum Sealing Mylar Bags Using FoodSaver Vacuum Sealers

foodsaver mylar bags

Vacuum sealing with a FoodSaver, Seal-a-Meal or similar is a great way store food, hops, grains, spices and more. Vacuum bags work to seal out oxygen, prevent freezer burn and more.

What Are the Advantages Mylar Bags?

Generally speaking Mylar bags consist of three layers. Two Mylar layers that laminate a center aluminum foil layer. This combination provides strength, flexibility and durability along with an extremely low Oxygen Transmission Rate (OTR). These bags also block potentially damaging light. Combine this with vacuum sealing and you’ve got an outstanding way to store food & more.

Search Amazon for “food grade mylar bags” – to see lots of current offerings

For homebrewer’s… Vacuum sealed Mylar bags are an excellent  way to store hops and other oxygen sensitive materials.  As a testament to this, many hop distributors distribute hops in Mylar bags.  Sometimes those are vacuum sealed and sometimes they are nitrogen flushed.

Do Mylar Bags Work with FoodSaver Vacuum Sealers?

A FoodSaver (or similar) is a standard home suction type vacuum sealer that relies on special bags. We generally call them… vacuum sealer bags. These bags are embossed or textured to create channels on the inside of the bag. Those channels allow a FoodSaver to draw out air and create a vacuum all while the machine is clamped down. When this process is done a heat strip seals the bag locking in the vacuum state.

Mylar bags have smooth walls. Since they don’t have the required special channels they will not work with FoodSaver machines.

Sealing Mylar Bags Using Traditional FoodSaver-Type Machines

There are some techniques out there that allow you to seal Mylar bags using a standard FoodSaver-type sealer.  All the techniques I’ve found make some use of channeled vacuum bags.

The techniques that I’ve run across are cumbersome.  I’ve developed two techniques to easily vacuum seal Mylar bags using traditional vacuum sealer type bags.  I originally wrote this in 2011.  It’s possible someone had used these techniques prior to this post.

#1 The “Nested” Method for Sealing Mylar Bags

  • Insert a filled Mylar bag into a standard vacuum sealer bag.
  • Vacuum seal the standard vacuum sealer bag.
  • The only entry path for oxygen is now the very top of the Mylar bag.  That very small opening is protected by the outer bag.
  • To access contents, trim a small amount off the outer bag and re-use as many times as possible.

#2 The “Snorkel” Method for Sealing Mylar Bags

  • Cut a 1″ strip off the top of a vacuum bag.
  • Fill the Mylar bag with hops or whatever you’re going to store.
  • Insert the 1″ strip into the filled bag so that the strip sticks out of the Mylar bag.
  • Trim the end of this strip so that about 1/2″ is sticking out of the Mylar bag.
  • Insert the top of the Mylar bag into the vacuum sealer bag, ensuring that the 1″ strip of vacuum bag is sticking slightly out of the top of the Mylar bag.  This acts as a channel.
  • Vacuum and Seal.
  • Because Mylar bags can be thicker that standard vacuum sealer bags, you may need to double seal the top with your vacuum sealer’s heat strip.
  • Trim the excess vacuum bag strip.
  • Trick Required: There is a trick here.  Notice I didn’t say FoodSaver bag.  I, initially, tried this with a FoodSaver bag and it wouldn’t seal correctly.  FoodSaver bags  are a bit thicker than most others on the market.  Look for a thinner style bag to try with this technique.

One Mylar Option Designed for FoodSaver-Type Machines

SteelPak has introduced a metalized vacuum bag that features an embossed/channeled design that allows these bags to work with FoodSaver-type vacuum machines.

Note that multiple variations of these products may be available, as such a different version may appear at these links

Using the Magic Seal MS300 to Seal Mylar Bags

MAGIC SEAL MS300 Precision Vacuum Sealer Machine, Double Pump Commercial Food Sealer with Built-in Auto Cooling System, Compatible with Mylar, Smooth and Embossed Bags, Extra Wide 8mm Seal

Works with Mylar Bags! Unlike many vacuum sealer designs this works with both standard channel style bags and compatible Mylar bags.

MAGIC SEAL MS300 Precision Vacuum Sealer Machine, Double Pump Commercial Food Sealer with Built-in Auto Cooling System, Compatible with Mylar, Smooth and Embossed Bags, Extra Wide 8mm Seal – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Using a Chamber Vacuum Sealer to Seal Mylar Bags!

A chamber style vacuum sealer does not rely on channeled bags. It evacuates the entire chamber and seals the bag. When this is done, prior to pressure equalization the bag does not look like it’s vacuum sealed at all. When pressure equalizes the bag immediately collapses and whammo, it’s sealed.

What are the Advantages of Chamber Vacuum Sealers?

  • Generally speaking, these remove more oxygen than FoodSaver machines.
  • Vacuum sealing wet or moist items is much easier. Since the entire chamber is evacuated, these aren’t prone to drawing out liquid like FoodSaver machines.
  • Bag cost. The special bags required by FoodSaver are more complex to produce and can lead to higher costs. Smooth sided vacuum bags can be had for less. If you’re re-using Mylar bags your bag cost essentially goes to 0.
  • One of the biggest benefits, to me, is being able to seal Mylar bags. Mylar bags have smooth sides and do not work with FoodSaver and similar. The lack of channels foils the process.

Chamber Vacuum Sealer Cost?

From the original version of this post, published in 2011: “Mylar bags are not generally expensive, so that’s great!  The problem is vacuum sealers that can seal Mylar bags ARE expensive.  Sometimes very expensive.  That’s not great!”

Since this how-to was published the landscape for chamber style machines has changed drastically. Back in 2011, they cost thousands of dollars. They were generally intended for commercial use and had price tags to match.

I’m happy to say some much more economical options have become available. Manufacturers have now started making quality units aimed at home users.

See: Hands on Review: Avid Armor CHAMBER Vacuum Sealer – seals mylar bags!


Note that multiple variations of this product may be available, as such a different version may appear at these links


This article contains affiliate links. We may make a small percentage if you use our links to make a purchase. You won’t pay more and you’ll be supporting Homebrew Finds and more content like this. Thank you for your support!


Oxygen Absorbers for Larger Bags

Pictured: FreshUS 300cc Oxygen Absorber(10 individual pack of 10 Packets, Total 100 Packets) – Long Term Food Storage (100, 300 CC)

When it comes to larger Mylar bags, vacuum sealing is not a realistic option. In that case oxygen absorbers are a good choice. You remove as much air as possible, add oxygen absorbers and seal the bag with an iron or other appropriate sealer.

Search Amazon for “oxygen absorbers”

Related: Inkbird VS-01 Hands on Review

Photo from My Hands on Review

Related:

Recent Hop Deals

More Homebrew Finds!

Recent Deals!

10 Most Recent Homebrew Resource Posts & How-To’s!

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. tag:lnksfxd toppost:mylarbags rs:7 tag:tpr

4 thoughts on “Vacuum Sealing Mylar Bags Using FoodSaver Vacuum Sealers

  1. Kimberly

    Sounds like I need to get out the Iron to reinforce the seal. Glad to know I do not need to fool with O2 packs.

  2. Kelly

    I know this post is old, but I stumbled across it today and I thought I would share what has worked for me. The Foodsaver type machines WILL seal the mylar bags, but the seal will not hold. So I put the food in the bag, vac/seal it with the vacuum sealer, and then use a cheap flat iron (for hair) to reinforce the seal. I’ve had bags retain their vaccum seal for at least a year this way (I’ve not tried keeping anything long than that, but I imagine it would last as long as the food would.)

  3. Anonymous

    You need to get a Snorkel Vac VS-280 from
    SorbentSystems.com for $99.00. They have many, many different bags for various needs. The sales staff is very helpful and they have a bundle package of bags you can buy. 10Feb2013

Comments are closed.