From the product description, check product page for current description, price and availability:

This is a used 5 gallon ball lock kegs. All kegs are pressure tested. Used kegs may have minor dings and scratches along with stickers from previous companies. Kegs will include the o-rings and poppets that were installed when received by AHS. We often change an o-ring or poppet to get the tank to hold pressure

The keg requires ball lock attachments for both gas and beer sides. It is a good idea to have a spare set of replacement o-rings always on hand, with some keg o-ring lubricant. Lubricating the o-rings will help to make them last longer, but eventually they will become brittle and have to be replaced.

Dimensions: 25″ tall x 8.5″ diameter (63.2 cm x 21.6 cm).

Good Keg Maintenance
Between each use, kegs need to cleaned and sanitized. Taking off the posts and cleaning them can help ensure great tasting beer.

Please remember these kegs are not being used in the soda industry any longer. Chances are, they are up to 30 years old. They have been used for Soda and might even come from a small brewery that purchased them from a soda company. They will have soda or beer residue inside which will require cleaning. The post may be sticky and difficult to get off as they have years of soda/beer build up in/on them. Please be prepared for a used product as we do not want to sugar coat this in any way. We are not stating that our used kegs are junk, we are simply stating, “These are used kegs”.

• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Homebrew Keg Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Step by Step: Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Portable Draft Beer Serving Options!
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Repair Part Numbers

From the product description, check product page for current description, price and availability:

This is a used 5 gallon ball lock kegs. All kegs are pressure tested. Used kegs may have minor dings and scratches along with stickers from previous companies. Kegs will include the o-rings and poppets that were installed when received by AHS. We often change an o-ring or poppet to get the tank to hold pressure

The keg requires ball lock attachments for both gas and beer sides. It is a good idea to have a spare set of replacement o-rings always on hand, with some keg o-ring lubricant. Lubricating the o-rings will help to make them last longer, but eventually they will become brittle and have to be replaced.

Dimensions: 25″ tall x 8.5″ diameter (63.2 cm x 21.6 cm).

Good Keg Maintenance
Between each use, kegs need to cleaned and sanitized. Taking off the posts and cleaning them can help ensure great tasting beer.

Please remember these kegs are not being used in the soda industry any longer. Chances are, they are up to 30 years old. They have been used for Soda and might even come from a small brewery that purchased them from a soda company. They will have soda or beer residue inside which will require cleaning. The post may be sticky and difficult to get off as they have years of soda/beer build up in/on them. Please be prepared for a used product as we do not want to sugar coat this in any way. We are not stating that our used kegs are junk, we are simply stating, “These are used kegs”.

• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Homebrew Keg Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Step by Step: Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Portable Draft Beer Serving Options!
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Repair Part Numbers

From the product description, check product page for current description, price and availability:

This is a used 5 gallon ball lock kegs. All kegs are pressure tested. Used kegs may have minor dings and scratches along with stickers from previous companies. Kegs will include the o-rings and poppets that were installed when received by AHS. We often change an o-ring or poppet to get the tank to hold pressure

The keg requires ball lock attachments for both gas and beer sides. It is a good idea to have a spare set of replacement o-rings always on hand, with some keg o-ring lubricant. Lubricating the o-rings will help to make them last longer, but eventually they will become brittle and have to be replaced.

Dimensions: 25″ tall x 8.5″ diameter (63.2 cm x 21.6 cm).

Good Keg Maintenance
Between each use, kegs need to cleaned and sanitized. Taking off the posts and cleaning them can help ensure great tasting beer.

Please remember these kegs are not being used in the soda industry any longer. Chances are, they are up to 30 years old. They have been used for Soda and might even come from a small brewery that purchased them from a soda company. They will have soda or beer residue inside which will require cleaning. The post may be sticky and difficult to get off as they have years of soda/beer build up in/on them. Please be prepared for a used product as we do not want to sugar coat this in any way. We are not stating that our used kegs are junk, we are simply stating, “These are used kegs”.

• The Most Difficult Spot to Check for CO2 Leaks
• Keg O-Ring Materials Selection! – EPDM, Silicone and Buna-N?
• Why Do I Have Bubbles in My Beer Line? Diagnosing and Fixing Kegerator Foam Problems
• Five Benefits of Using Corny Kegs As Fermenters
• Rebuilding & Reconditioning Homebrew Kegs!
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Homebrew Keg Carbonate? Fixing Draft Beer Carbonation Problems
• What Does a Flow Control Faucet Do?
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Cleaning Pump!
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Step by Step: Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Portable Draft Beer Serving Options!
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – concepts, applications and models
• Bulk Keg Orings and Keg Repair Part Numbers