Category Archives: Towers

Dual Faucet Draft Beer Tower – Faucets, Tap Handles, Caps Hose & Keg Wrench

Dual Beer Tower Dispenser - Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench

Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench

More Info

From the product description, check product page for current description, price and availability:

  • [Double Your Pouring Power]: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating; The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for
  • [Use Your Equipment]: Inside lined with foam sheet for cooled tower systems insulation; Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter; 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern); Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach
  • [Built to Last]: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage; PVC transparent hose is safe for beverages
  • [Keep Out Contaminants]: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are an essential part of draft faucet hygiene as it protects the faucets from insects and contaminants that could otherwise make their way into the spout of the faucet and into your drink; Tap handles are threaded and removable for easy cleaning and sanitizing
  • [Package Contents]: This beer faucet accessories package includes (1) double tap draft beer tower, (2) beverage tap flow control faucets, (2) faucet covers, (4) mounting hardware bolts, (1) tower gasket, (2) hose drink tubes, hose clamps, and a multi-purpose keg faucet wrench for your convenience; Keg couplers required, not included

 

Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench – note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

Single Tap Beer Tower from MoreBeer – $79.99, Save $20 + Free Shipping, Limited Availability

Draft Beer Tower - Single Tap

Single Tap Beer Tower from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

If you’ve been looking for a stylish way to serve your homebrew, you will love this single faucet beer tower for the fit, finish, and value.

This draft beer tower includes 4′ of 3/16″ ID beer line and tail piece/hex nut for connection to commercial sanke style keg. If you are a homebrewer using Cornelius style kegs you can cut off the Sanke fittings and attach the appropriate fittings for your kegs.

Specifications:

  • 3″ Diameter
  • Single tap beer tower
  • 9 1/4″ faucet height
  • 12″ overall height
  • Single tap

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $79.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Draft Beer Tower – Single Faucet D1320

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

Homebrew Reviews: Draft and Kegerator

Nukatap Forward Sealing Stainless Steel Faucets – from $34.99 + Hands on Review

nukatap faucets

Nukatap forward sealing faucets are Kegland’s follow up to their extremely popular line of Intertap faucets.  They work with all Intertap spout accessories and sport a number of improvement

More Info

From Kegland:

What makes the NUKATAP different among the older manufactured styles of taps on the market?

First Pour Foam Reduction
The reduction in thermal mass significantly reduces the first pour foam effect. The tap is often the warmest part of the draft system as it protrudes from the font/tower/fridge. As a result, it acts like a heat sink and only works well once enough cold beer flows through it to cool the tap body down. This reduction of thermal mass significantly improves the foam that is poured while the tap is cooling down.

Laminar Flow
The NUKASHUTTLE design is the world’s first seamless shuttle. After many months of modeling and testing this new “NUKE” shaped shuttle design has the most fluid dynamic shuttle shape ever manufactured for a forward sealing tap. The streamline “nuke/missile” shape is how this new innovation earned its name “NUKATAP”. This leap forward in laminar flow means even highly carbonated beers pour like a dream with minimal turbulence and giving you the perfect pour every time.

Most Sanitary Design
The NUKASHUTTLE is the world’s first seamless single-piece design. Traditional taps have a seal that is seated on a stainless-steel body creating small fissures that harbor solids, are potential sites for infection, and are not as ideal for clean in place (CIP). The NUKASHUTTLE is an advanced TPV rubber matrix that been seamlessly formed over a durable PP skeleton. This single-piece design takes away the traditional fissures found in older manufacturing methods.

Long Life Seals
Unlike many other taps that use rubbers that can be degraded with caustic and acid compounds, the NUKATAP has been made to suit a wide range of conditions. It’s becoming more common to see sour beers/kombucha and other acetic and lactic acid beverages dispensed using draft systems. These acids, in particular, could cause an attack on the sealing compounds resulting in downtime, loss of product and reduced maintenance intervals.
The NUKATAP solves this problem and is the most chemically resistant tap we have ever manufactured. Unlike some older tap styles that have “metal on metal” rubbing components that can wear over time and have a “raspy feel” the NUKATAP has been manufactured with a smooth gliding action that guarantees the longevity of the tap components. The TPV rubber matrix shuttle is also one of the most durable sealing mechanisms that can tolerate large amounts of leverage force from long tap handles that would otherwise traditionally degrade the seals in other tap designs.

Other forward sealing designs exist but nothing with the same level of reliability. It’s easy to find other “perl” forward sealing design taps however these taps use a floating o-ring design which by all means is equally as sanitary however the floating o-ring requires the oring to move within the tap body to seal correctly. This movement is typically a problem as the tap ages and/or is not serviced regularly. The NUKATAP bypasses this seal as the entire NUKASHUTTLE is a single sealing piece.

Tap Handle Angle – 2.5degree Reverse Angle
The new NUKATAPS have been manufactured with a 2.5degree reverse angle. This allows for a wider range of taps handles to be used, in particular, long and/or heavy handles to work perfectly irrespective of the installation conditions.

 

Forward Sealing Design
Just like the Intertap and its predecessors, the NUKATAP shuts off the flow at the front of the tap which in turn keeps wild yeast and bacteria out of the interior of the tap body. Put end to substandard beer and only use the all-new NUKATAP

What does Rear Sealing Design Mean?
Typically most beer taps use a rear sealing design and the beer in the tap drains from the body of the tap with the help from a vent hole drilled at the front of the tap. This drainage hole is a dark and wet cavity and is an ideal place for airborne bacteria and wild yeast to reproduce leaving a foul film that deteriorates the quality of your beer. Every time the faucet is opened contamination occurs.


 

  • These are selling for $35.99.
  • Buy 3 or more and they drop to $34.99 each.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

Nukatap Stainless FaucetHands on Review

Get a Freebie

No need to add free item to your cart.  Just use the coupon code and they will be automatically added at checkout.  Limit one per order.

We’re not currently tracking any freebies

keg deals

Visit William’s Brewing – Web Only Clearance Sale

More: Recent William’s Brewing Finds

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsnktp tag:wmsbuyageta

Single Tap Beer Tower from MoreBeer – $79.99, Save $20 + Free Shipping, Limited Availability

Draft Beer Tower - Single Tap

Single Tap Beer Tower from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

If you’ve been looking for a stylish way to serve your homebrew, you will love this single faucet beer tower for the fit, finish, and value.

This draft beer tower includes 4′ of 3/16″ ID beer line and tail piece/hex nut for connection to commercial sanke style keg. If you are a homebrewer using Cornelius style kegs you can cut off the Sanke fittings and attach the appropriate fittings for your kegs.

Specifications:

  • 3″ Diameter
  • Single tap beer tower
  • 9 1/4″ faucet height
  • 12″ overall height
  • Single tap

 

Limited Availability Deal of the Day: As of this posting, this is marked down to $79.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Draft Beer Tower – Single Faucet D1320

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

Homebrew Reviews: Draft and Kegerator

THREE Tap Intertap Stainless Steel Draft Tower with Faucets – On Sale for $159.99 + Free Shipping & Intertap Review

Intertap Stainless Steel Draft Towers (3 Tap) D1355

Intertap Stainless Steel Draft Towers (3 Tap)

More Info

From the product description, check product page for current description, price and availability:

Stainless steel draft tower with three Intertap faucets.

Includes EVA beer line which is PVC and BPA free. EVA line is more ridgid than vinyl and requires boiling water to soften for assembly. EVA line is often used in commercial draft systems.

Includes:

Stainless steel draft tower
Intertap faucets
Stainless steel faucet shanks
Gas and beverage tubing
Hose clamps
Draft tower mounting screws
Faucet wrench
Dimensions:

13.4 in. tall (without faucets)
3 in. tower diameter
4.4 in. base diamete


 

  • As of this posting, MoreBeer has this for $159.99.
  • Shipping is free with a qualifying $59 order to many US addresses. Price, promotions and availability can change quickly.
  • Intertaps are awesome!  Check out my Hands on Review of these great faucets.

Intertap Stainless Steel Draft Towers (3 Tap) D1355

Hands on Review: Intertap Forward Sealing Faucets and Accessories!

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability

Taper Cut Stainless Steel Draft Tower – $99.99, Save $30 + free shipping

Taper Cut TowerTaper Cut Tower via Adventures in Homebrewing

64 oz Stainless Steel Growler w/Stainless Steel cap via Adventures in Homebrewing

More Info

From the product description, check product page for current description, price and availability:

When you receive your new tower, the weight is the first thing you will notice. These single faucet towers are made with quality in mind. Quality is not the only advantage of buying from Adventures in Homebrewing, we will also customize the tower for your needs. Whether you need a pin lock or sanke we will be sure to prepare your tower for you! The tower comes standard with 5′ of beer line and fittings (tail piece, beer nut and washer) for commercial couplers. You can select below if you need us to swap the fitting to the MFL screw-on barb for corny keg disconnects. Switching between commercial and corny kegs? Select the MFL screw-on barb and add the commercial adapter. The screw-on barb can be attached to your ball/pin lock MFL disconnect or to the commercial adapter which replaces the standard tail piece on the sanke!

* Total Height: 18″ 1 Pcs.

* Tower Finish: SS Polished ; Tower Material: SS 304

* Faucet Finish: Chrome Plated ; Faucet Material: Brass

* Includes 1 Standard US Faucet & knob with brass insert

*Pre-fitted with 3/16″ ID x 5′ long NSF approved tubing with beer nut on one end.

* All mounting hardware & gasket

* Neoprene washer

* Air Cooled


 

Note: The tower is made from 304 Stainless Steel.  The included faucet is chrome plated brass.

  • AIH has these marked down to just $99.99  That’s a $30 savings.
  • Stacks With Free Shipping!  Adventures in Homebrewing is offering free shipping on most orders of $55 or more with a few exclusions.

Taper Cut Tower

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability.

homebrewing.org sale

More: Recent AIH Finds

Kegco Stainless Steel TWO Tap Tower with Faucets

Kegco DT145-2BS-ASC Beer Tower

Kegco DT145-2BS-ASC Beer Tower

More Info

From the product description, check product page for current description, price and availability:

  • This Kegco DT145-2BS-ASC 14″ tall brushed stainless steel draft beer tower comes with two matching stainless steel faucets for 100% stainless steel contact with your beer
  • This stainless steel tower is 2″ taller than most standard towers, giving you more than enough space to fill up your pint glass or growler
  • The draft beer tower is 3″ in diameter, allowing enough air circulation to help maintain the draft beer temperature
  • Tower includes two separate 5′ lengths of 3/16″ clear beer tubing with a nozzle, hex nut assemblies, 2 sleek black faucet knobs, and screws and gasket for installation
  • Kegco draft beer towers are compatible with all standard keg couplers

 

Kegco DT145-2BS-ASC Beer Tower – note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

Pipe Tower and Tee Style Draft Towers – up to 12 faucets – 13% Off, Save Up To $202

Adventures in Homebrewing has a GREAT selection of draft towers.  Those range from standard single taps all the way up to large, beautifully designed 12 tap monsters.  AIH has standard towers, tee style towers and pipe towers.  Check their Draft Beer Faucet Tower page for current selection and pricing.

If you’re an avid homebrewer/craft beer lover, run a commercial operation or just want to trick out your home bar, you may have some interest in their larger pipe and tee style designs.  Generally speaking, these are priced competitively, but still expensive.  If you’re looking to save some money…

Talk Like a Pirate & Save 13%!  Adventures in Homebrewing’s annual talk Like  Pirate Sale is on.  That discounts most things by 13% when you use coupon code LOOT.  Nearly everything, including many items that are already on sale works with this sale.  There are some exceptions.  See Terms and Conditions for complete details.  Prices go up to… $1554.99.  That means you can save up to $202.15 with this deal.

Save on Draft Beer Towersremember promo code LOOT

Update: This promo has expired or pricing, availability or description has changed – Check the supplier’s site or product page for current availability

Recent Deals!  Last Fifty Finds

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

homebrewing.org sale

More: Recent AIH Finds

prod:aihtowers tag:aihperoff

MoreBeer’s Two Faucet Tower – includes faucets – $94.99 + free shipping, limited availability+ Tips & Gear for Your Kegerator

4229

Two Faucet Beer Tower from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

If you’ve been looking for a stylish way to serve your homebrew, you will love this single faucet tower for the fit, finish, and value.

Includes 4′ of 3/16″ ID beer line and tail piece/hex nut per faucet for connection to commercial sanke style keg. If you are a homebrewer using Cornelius style kegs you can cut off the Sanke fittings and attach the appropriate fittings for your kegs.

Specifications:

  • 3″ Diameter
  • Stainless shanks
  • 9 1/4″ faucet height
  • 12″ overall height
  • Two faucets

Please note: Towers do not come with the wooden faucet handles shown in the product photo.


 

Limited Availability Deal of the Day: As of this posting, this is marked down to $94.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Beer Tower – 2 Faucets D1340

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

Nukatap Forward Sealing Stainless Steel Faucets – from $34.99

nukatap faucets

Nukatap forward sealing faucets are Kegland’s follow up to their extremely popular line of Intertap faucets.  They work with all Intertap spout accessories and sport a number of improvement

More Info

From Kegland:

What makes the NUKATAP different among the older manufactured styles of taps on the market?

First Pour Foam Reduction
The reduction in thermal mass significantly reduces the first pour foam effect. The tap is often the warmest part of the draft system as it protrudes from the font/tower/fridge. As a result, it acts like a heat sink and only works well once enough cold beer flows through it to cool the tap body down. This reduction of thermal mass significantly improves the foam that is poured while the tap is cooling down.

Laminar Flow
The NUKASHUTTLE design is the world’s first seamless shuttle. After many months of modeling and testing this new “NUKE” shaped shuttle design has the most fluid dynamic shuttle shape ever manufactured for a forward sealing tap. The streamline “nuke/missile” shape is how this new innovation earned its name “NUKATAP”. This leap forward in laminar flow means even highly carbonated beers pour like a dream with minimal turbulence and giving you the perfect pour every time.

Most Sanitary Design
The NUKASHUTTLE is the world’s first seamless single-piece design. Traditional taps have a seal that is seated on a stainless-steel body creating small fissures that harbor solids, are potential sites for infection, and are not as ideal for clean in place (CIP). The NUKASHUTTLE is an advanced TPV rubber matrix that been seamlessly formed over a durable PP skeleton. This single-piece design takes away the traditional fissures found in older manufacturing methods.

Long Life Seals
Unlike many other taps that use rubbers that can be degraded with caustic and acid compounds, the NUKATAP has been made to suit a wide range of conditions. It’s becoming more common to see sour beers/kombucha and other acetic and lactic acid beverages dispensed using draft systems. These acids, in particular, could cause an attack on the sealing compounds resulting in downtime, loss of product and reduced maintenance intervals.
The NUKATAP solves this problem and is the most chemically resistant tap we have ever manufactured. Unlike some older tap styles that have “metal on metal” rubbing components that can wear over time and have a “raspy feel” the NUKATAP has been manufactured with a smooth gliding action that guarantees the longevity of the tap components. The TPV rubber matrix shuttle is also one of the most durable sealing mechanisms that can tolerate large amounts of leverage force from long tap handles that would otherwise traditionally degrade the seals in other tap designs.

Other forward sealing designs exist but nothing with the same level of reliability. It’s easy to find other “perl” forward sealing design taps however these taps use a floating o-ring design which by all means is equally as sanitary however the floating o-ring requires the oring to move within the tap body to seal correctly. This movement is typically a problem as the tap ages and/or is not serviced regularly. The NUKATAP bypasses this seal as the entire NUKASHUTTLE is a single sealing piece.

Tap Handle Angle – 2.5degree Reverse Angle
The new NUKATAPS have been manufactured with a 2.5degree reverse angle. This allows for a wider range of taps handles to be used, in particular, long and/or heavy handles to work perfectly irrespective of the installation conditions.

 

Forward Sealing Design
Just like the Intertap and its predecessors, the NUKATAP shuts off the flow at the front of the tap which in turn keeps wild yeast and bacteria out of the interior of the tap body. Put end to substandard beer and only use the all-new NUKATAP

What does Rear Sealing Design Mean?
Typically most beer taps use a rear sealing design and the beer in the tap drains from the body of the tap with the help from a vent hole drilled at the front of the tap. This drainage hole is a dark and wet cavity and is an ideal place for airborne bacteria and wild yeast to reproduce leaving a foul film that deteriorates the quality of your beer. Every time the faucet is opened contamination occurs.


 

  • These are selling for $35.99.
  • Buy 3 or more and they drop to $34.99 each.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

Nukatap Stainless FaucetHands on Review

Update: This promo has expired or pricing, availability or description has changed – Check the supplier’s site or product page for current availability

Recent Deals!  Last Fifty Finds

Get a Freebie

No need to add free item to your cart.  Just use the coupon code and they will be automatically added at checkout.  Limit one per order.

We’re not currently tracking any freebies

keg deals

Visit William’s Brewing – Web Only Clearance Sale

More: Recent William’s Brewing Finds

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsnktp tag:wmsbuyageta