Category Archives: Utility Pumps

660 GPH Utility Pump by FREESEA + free prime ship & Draft Line Cleaning Builds

FREESEA 160-1100 GPH Submersible Water Pump for Pond Aquariums Hydroponics Fish Tank Garden Fountain Waterfall

FREESEA Submersible Water Pump

More Info
Highlighted Features
  • Intelligent Dry Heating Protection: The submersible water pump will stop from draining and pumping water, al long as the temperature reaches to 185 ℉(85℃), and the motor will restart working after the temperature goes down. This function can effectively reduce the damage caused by dry running.
  • Low Water Level Design: The powerful suction at the bottom can pump water as low as 0.2 inches, and with the 360 degree water suction design, it can solve the problems of cleaning, while keeping water circulating all around.
  • Product Dimensions: 5.1*3.75*4.72inches, this fountain water pump comes with 5.97ft power cord, and the max flow rate can be up to 660GPH, the max lift height can be up to 8.2FT.
  • Ultra Quiet Design: The aquarium fish tank pump comes with a duarable and corrosion-resistant ceremic motor which runs less than 20 decibels, offering a quiet environment. And it is easy to disassemble and clean.
  • 12-month Warranty: Equipped with pure copper wiring, the small pond pump has a longer service life and is more energy savings. There's a 12-month warranty and 24 hours professional after-sales service, if you have any questions about the water pump you got, please feel free to contact us.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA 660 GPH 40W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

EcoPlus 290 Gallon Per Hour Submersible Pump + Draft Line Cleaning Build

EcoPlus 290 GPH (1098 LPH, 17W) Submersible Water Pump w/ 6 ft Power Cord | Aquarium, Fish Tank, Fountain, Pond, Hydroponics

Eco 290 Submersible Pump by EcoPlus

More Info

From the product description, check product page for current description, price and availability:

  • 264 Gallons per hour; 28 watt motor
  • Included fittings: .75″ Barbed x .75″ Threaded, two-.5″ Barbed x .75″ Threaded and Nozzle x 3.4″ Threaded
  • Suitable for installation on dry land for in-line use or submersibly into the water
  • Pre-wired 69 inch 120v power cord
  • Suitable for use in hydroponic systems, ponds,fresh and saltwater aquariums, fountains and filter systems

 

EcoPlus 290 GPH (1098 LPH, 17W) Submersible Water Pump w/ 6 ft Power Cord | Aquarium, Fish Tank, Fountain, Pond, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider – Ball Lock QD Jumper

ball lock jumperAllows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. prod:B0012UZYMG tag:dirlink

boxtech Submersible Water Pump – 265 GPH + Draft Line Cleaning Build

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary

boxtech Submersible Water Pump

More Info

From the product description, check product page for current description, price and availability:

  • A multi-functional Submersible pump=Add water+Change water+Circulating water+Sucking fish manure. Equipped with 2 water outlets and 5.6 Ft power cord, can be applied in aquarium, fountains, hydroponic and pond
  • Water pump with bottom suction trainer,100% submersible.The pump motor is sealed with high-quality resin and has better insulation performance, which can effectively prevent Water leakage and Electric leakage
  • Max Flow Rate: 265 GPH per hour, Max Lift height: up to 5.6 Feet. 25W high efficiency motor for energy saving, and low water level design
  • This submersible water pump is multi-purpose water pump with low power consumption, low noise, balanced speed, reliable operation, long service life, easy to maintain
  • Backed by 12 month warranty and professional after-sale service within 24hrs

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Lyqily 740GPH Submersible Water Pump – Draft Line Cleaning, Potential Mark II Replacement & More

Lyqily 740GPH Submersible Water Pump Ultra Quiet 55W

More Info
Highlighted Features
  • 【ADJUSTABLE】Designed with a adjusting knob, allowing to adjust the water flow rate.
  • 【STEADY STAY】Rubber suction cups can be a good fit in the glass surface, to help keep it stability.
  • 【CLEANABLE】No need any tools to detach it, easy to separate, easy to clean.
  • 【ULTRA-QUIET】Energy-saving low power, keep reliability and low noise operation, giving you quiet environment.
  • 【WIDELY USED】This submersible pump is perfect for aquariums, fountains, ponds and hydroponic systems, etc.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential Uses:

Photo via Sourcing a Replacement Pump for Mark’s Keg and Carboy Washer

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″)  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related: Our Line Cleaning Builds:

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

400 GPH Utility Pump + Draft Line Cleaning Builds

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary

FREESEA Submersible Pump

More Info

From the product description, check product page for current description, price and availability:

  • High Efficiency and High Quality Materials: Compared with other submersible pumps, This submersible water pump fountain has higher quality and performance. The fountain pump casing is made of high quality ABS plastic and resin, which is anti-corrosion, acid and alkali resistant and waterproof and the protection function of water-proof is IPX8.
  • Water Flow Control and two Water Outlets : The submersible pump has a flow size adjustment valve, you can adjust to get the required water flow and control the water flow.The FREESEA water pump for aquarium is equipped with two water nozzles (1/2 inch and 4/5 inch). Max Flow: 400 GPH. Max Height:5.9 ft.
  • Ultra-Quiet Design : The water pump aquarium is designed with high quality motor to provide a quiet working environment, also with the function of energy saving and low power consumption, even in the bedroom or at night (power: 25 Watt). The threaded fittings of the pump make it work more stable. The impeller shaft is made of stainless steel shaft which can be used for fresh water or sea water. It is resistant to abrasion, rust and has a long service life.
  • Filter sponge and Suction Cup and footpad : This pump has 1 filter sponge, which can effectively filter large blocks during pumping to prevent water pump blockage, effectively improve the circulation system to maintain a clean water environment.And there are four powerful suction cup or footpad at the bottom of the small pump that fits well on a horizontal or vertical glass surface to keep the pump running smoothly.
  • Removable and Cleanable: The water pump for aquarium can be disassembled and assembled easily without any tools. The removable pump head with filter sponge is easy to clean and prevents impurities from entering the pump, and the pump is small in size, making the pump easy to hide or camouflage and easy to carry.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA Submersible Pump for Aquarium, Pond, Fountain, Hydroponics, Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

boxtech Submersible Water Pump – 265 GPH + Draft Line Cleaning Build

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary

boxtech Submersible Water Pump

More Info

From the product description, check product page for current description, price and availability:

  • A multi-functional Submersible pump=Add water+Change water+Circulating water+Sucking fish manure. Equipped with 2 water outlets and 5.6 Ft power cord, can be applied in aquarium, fountains, hydroponic and pond
  • Water pump with bottom suction trainer,100% submersible.The pump motor is sealed with high-quality resin and has better insulation performance, which can effectively prevent Water leakage and Electric leakage
  • Max Flow Rate: 265 GPH per hour, Max Lift height: up to 5.6 Feet. 25W high efficiency motor for energy saving, and low water level design
  • This submersible water pump is multi-purpose water pump with low power consumption, low noise, balanced speed, reliable operation, long service life, easy to maintain
  • Backed by 12 month warranty and professional after-sale service within 24hrs

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

660 GPH Utility Pump by FREESEA + Draft Line Cleaning Builds

FREESEA 160-1100 GPH Submersible Water Pump for Pond Aquariums Hydroponics Fish Tank Garden Fountain Waterfall

FREESEA Submersible Water Pump

More Info
Highlighted Features
  • Intelligent Dry Heating Protection: The submersible water pump will stop from draining and pumping water, al long as the temperature reaches to 185 ℉(85℃), and the motor will restart working after the temperature goes down. This function can effectively reduce the damage caused by dry running.
  • Low Water Level Design: The powerful suction at the bottom can pump water as low as 0.2 inches, and with the 360 degree water suction design, it can solve the problems of cleaning, while keeping water circulating all around.
  • Product Dimensions: 5.1*3.75*4.72inches, this fountain water pump comes with 5.97ft power cord, and the max flow rate can be up to 660GPH, the max lift height can be up to 8.2FT.
  • Ultra Quiet Design: The aquarium fish tank pump comes with a duarable and corrosion-resistant ceremic motor which runs less than 20 decibels, offering a quiet environment. And it is easy to disassemble and clean.
  • 12-month Warranty: Equipped with pure copper wiring, the small pond pump has a longer service life and is more energy savings. There's a 12-month warranty and 24 hours professional after-sales service, if you have any questions about the water pump you got, please feel free to contact us.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA 660 GPH 40W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

EcoPlus 290 Gallon Per Hour Submersible Pump + Draft Line Cleaning Build

EcoPlus 290 GPH (1098 LPH, 17W) Submersible Water Pump w/ 6 ft Power Cord | Aquarium, Fish Tank, Fountain, Pond, Hydroponics

Eco 290 Submersible Pump by EcoPlus

More Info

From the product description, check product page for current description, price and availability:

  • 264 Gallons per hour; 28 watt motor
  • Included fittings: .75″ Barbed x .75″ Threaded, two-.5″ Barbed x .75″ Threaded and Nozzle x 3.4″ Threaded
  • Suitable for installation on dry land for in-line use or submersibly into the water
  • Pre-wired 69 inch 120v power cord
  • Suitable for use in hydroponic systems, ponds,fresh and saltwater aquariums, fountains and filter systems

 

EcoPlus 290 GPH (1098 LPH, 17W) Submersible Water Pump w/ 6 ft Power Cord | Aquarium, Fish Tank, Fountain, Pond, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider – Ball Lock QD Jumper

ball lock jumperAllows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. prod:B0012UZYMG tag:dirlink

1,300 GPH Subermsible Pump via MoreBeer- $39.99 + free ship eligible, limited availability

Submersible Pump - 1300 GPH PMP602

Submersible Pump – 1300 GPH from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

If you’re searching for an affordable pump to use with your temperature control system, look no further. This submersible pump can be easily integrated with an ice bank or glycol chiller. Don’t be fooled by its low-profile compact design. With a flow rate of 1300 gallons per hour and a max lift height or nearly 10 feet, this pump will keep the solution moving in your chilling system with ease. Comes with interchangeable 1/2 in. and 3/4 in. plastic barbs.

  • Maximum flow rate: 1300 GPH
  • Max lift height: 10 ft.
  • Comes with 2 barb fittings – 1/2″ & 3/4″
  • High quality 100W motor runs quiet
  • Stainless steel impeller shaft
  • 6 ft. long power cord

 

Related: 

Limited Availability Deal of the Day: As of this posting, this on sale as as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount

Submersible Pump – 1300 GPH PMP602

MORE MoreBeer Deals!…This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post


boxtech Submersible Water Pump + Draft Line Cleaning Build

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary

boxtech Submersible Water Pump

More Info

From the product description, check product page for current description, price and availability:

  • A multi-functional Submersible pump=Add water+Change water+Circulating water+Sucking fish manure. Equipped with 2 water outlets and 5.6 Ft power cord, can be applied in aquarium, fountains, hydroponic and pond
  • Water pump with bottom suction trainer,100% submersible.The pump motor is sealed with high-quality resin and has better insulation performance, which can effectively prevent Water leakage and Electric leakage
  • Max Flow Rate: 265 GPH per hour, Max Lift height: up to 5.6 Feet. 25W high efficiency motor for energy saving, and low water level design
  • This submersible water pump is multi-purpose water pump with low power consumption, low noise, balanced speed, reliable operation, long service life, easy to maintain
  • Backed by 12 month warranty and professional after-sale service within 24hrs

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

660 GPH Utility Pump by FREESEA + Draft Line Cleaning Builds

FREESEA 160-1100 GPH Submersible Water Pump for Pond Aquariums Hydroponics Fish Tank Garden Fountain Waterfall

FREESEA Submersible Water Pump

More Info
Highlighted Features
  • Intelligent Dry Heating Protection: The submersible water pump will stop from draining and pumping water, al long as the temperature reaches to 185 ℉(85℃), and the motor will restart working after the temperature goes down. This function can effectively reduce the damage caused by dry running.
  • Low Water Level Design: The powerful suction at the bottom can pump water as low as 0.2 inches, and with the 360 degree water suction design, it can solve the problems of cleaning, while keeping water circulating all around.
  • Product Dimensions: 5.1*3.75*4.72inches, this fountain water pump comes with 5.97ft power cord, and the max flow rate can be up to 660GPH, the max lift height can be up to 8.2FT.
  • Ultra Quiet Design: The aquarium fish tank pump comes with a duarable and corrosion-resistant ceremic motor which runs less than 20 decibels, offering a quiet environment. And it is easy to disassemble and clean.
  • 12-month Warranty: Equipped with pure copper wiring, the small pond pump has a longer service life and is more energy savings. There's a 12-month warranty and 24 hours professional after-sales service, if you have any questions about the water pump you got, please feel free to contact us.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA 660 GPH 40W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

EcoPlus 290 Gallon Per Hour Submersible Pump + Draft Line Cleaning Build

EcoPlus 290 GPH (1098 LPH, 17W) Submersible Water Pump w/ 6 ft Power Cord | Aquarium, Fish Tank, Fountain, Pond, Hydroponics

Eco 290 Submersible Pump by EcoPlus

More Info

From the product description, check product page for current description, price and availability:

  • 264 Gallons per hour; 28 watt motor
  • Included fittings: .75″ Barbed x .75″ Threaded, two-.5″ Barbed x .75″ Threaded and Nozzle x 3.4″ Threaded
  • Suitable for installation on dry land for in-line use or submersibly into the water
  • Pre-wired 69 inch 120v power cord
  • Suitable for use in hydroponic systems, ponds,fresh and saltwater aquariums, fountains and filter systems

 

EcoPlus 290 GPH (1098 LPH, 17W) Submersible Water Pump w/ 6 ft Power Cord | Aquarium, Fish Tank, Fountain, Pond, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider – Ball Lock QD Jumper

ball lock jumperAllows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. prod:B0012UZYMG tag:dirlink

Kedsum 880 GPH Submersible Pump + Recirculating Draft Line Cleaning Build

KEDSUM 880GPH Submersible Pump(3500L/H, 100W), Ultra Quiet Water Pump with 10ft High Lift, Fountain Pump with 5.9 ft Power Cord, 3 Nozzles for Fish Tank , Pond , Aquarium, Statuary, Hydroponics

KEDSUM Submersible Pump

More Info

From the product description, check product page for current description, price and availability:

  • ★Powerful Speed Flow: Max Flow Rate: 880 GPH per hour(3500L/H), Max Lift Height: up to 10 Feet.(Length of power cord:5.9ft)
  • ★Ultra Quiet: This water pump is designed for reliability and ultra-quiet operation to provide years of service, energy-saving and low power consumption.(Power: 100 W,Voltage: 110V)
  • ★Perfect size: This profile size water pump is great to hide or disguise (Dimensions: 5.1″(H)*5.1″(L)*3.9″(W)).With no seals or messy oils ,the suction cups mounting feet for either vertical or horizontal mounting.
  • ★3 Outlet Adapters: Equipped with 3 Outlet Adapters ,one is 0.51inch,one is 0.63inch ,and the other is 0.75inch, providing a different water flow as you desired.This submersible pump is ideal for fresh-water, salt-water, can be applied in aquarium, fountains, spout, hydroponic and pond.
  • ★Detachable and Cleanable: The water pump is easy to detach to clean. [NOTE: This water pump is metric threads. Pump metric threaded fit for vinyl tubing, need a 13mm metric to 0.5″ NPT Adapter to fit for standard 1/2″ threaded PVC fitting.]

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

KEDSUM Submersible Pump – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Recirculating Draft Line Cleaning Build

Winkeyes 400GPH Pump

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles

– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

 

Continue reading

boxtech Submersible Water Pump – 265 GPH + Draft Line Cleaning Build

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary

boxtech Submersible Water Pump

More Info

From the product description, check product page for current description, price and availability:

  • A multi-functional Submersible pump=Add water+Change water+Circulating water+Sucking fish manure. Equipped with 2 water outlets and 5.6 Ft power cord, can be applied in aquarium, fountains, hydroponic and pond
  • Water pump with bottom suction trainer,100% submersible.The pump motor is sealed with high-quality resin and has better insulation performance, which can effectively prevent Water leakage and Electric leakage
  • Max Flow Rate: 265 GPH per hour, Max Lift height: up to 5.6 Feet. 25W high efficiency motor for energy saving, and low water level design
  • This submersible water pump is multi-purpose water pump with low power consumption, low noise, balanced speed, reliable operation, long service life, easy to maintain
  • Backed by 12 month warranty and professional after-sale service within 24hrs

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

400 GPH Submersible Utility Pump + Recirculating Draft Line Cleaning Build

Aquastore 400GPH 25W Submersible Water Pump Ultra Quiet Fountain Water Pump with US Plug,usded as Aquarium Pump,Fountain Pump, Statuary Pump, Pond Pump,Fish Tank Pump, Hydroponic Pump,Waterfall Pump

Aquastore 400GPH 25W Submersible Water Pump

More Info

From the product description, check product page for current description, price and availability:

  • 400GPH 1500L/H Submersible Water Pump, 25W aquarium circulation pump and fountain water pump,2 Meters max lift, 6 feet UL listed 3-core cord with 3pin plug,with 3 nozzles;
  • Wide Application-The Aquastore submersible pump comes with ultra quiet design and perfect durable 25W motor. perfect for use as aquarium pump, fountains pumps, statuary ,landscaping, water feature pump,waterfall pumps ,table top fountain pump,spout, pond pump, water gardens pump and hydroponic systems pump, etc;
  • Adjustable flow rate pump-designed with a adjusting knob, can adjust the water flow rate;with 4 strong rubber suction cups help to stick the pump steadily in the aquarium either vertically or horizontally;
  • With 3 barbed outlet adapter ,in outside diameter of 0.51inch/0.62 inch/0.75inch;nozzle threaded design makes it more stable ;
  • Detachable & Cleanable-the pump doesn’t need tools to disassemble and its very easy to clean and install;

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Aquastore 400GPH 25W Submersible Water Pump Ultra Quiet Fountain Water Pump with US Plug,usded as Aquarium Pump,Fountain Pump, Statuary Pump, Pond Pump,Fish Tank Pump, Hydroponic Pump,Waterfall Pump – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

boxtech Submersible Water Pump – 265 GPH + Draft Line Cleaning Build

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary

boxtech Submersible Water Pump

More Info

From the product description, check product page for current description, price and availability:

  • A multi-functional Submersible pump=Add water+Change water+Circulating water+Sucking fish manure. Equipped with 2 water outlets and 5.6 Ft power cord, can be applied in aquarium, fountains, hydroponic and pond
  • Water pump with bottom suction trainer,100% submersible.The pump motor is sealed with high-quality resin and has better insulation performance, which can effectively prevent Water leakage and Electric leakage
  • Max Flow Rate: 265 GPH per hour, Max Lift height: up to 5.6 Feet. 25W high efficiency motor for energy saving, and low water level design
  • This submersible water pump is multi-purpose water pump with low power consumption, low noise, balanced speed, reliable operation, long service life, easy to maintain
  • Backed by 12 month warranty and professional after-sale service within 24hrs

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

800 GPH Submersible Utility Pump + Recirculating Draft Line Cleaning Build

Yokgrass 800GPH Submersible Pump(3000L/H), Ultra Quiet Adjustable Water Pump with 10ft High Lift, Fountain Pump with 5ft Power Cord, 3 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics

Yokgrass 800GPH Submersible Pump(3000L/H)

More Info

From the product description, check product page for current description, price and availability:

  • 【Powerful & Water Flow Control】With the Adjustable Knob, you can control the water flow rate to get the amount of water pressure you want by up to 800 GPH (3000L/H), Max Lift height: up to 10 Feet. Watt: 24W; Voltage:110-120V.
  • 【Detachable Suction Cup】This profile size water pump is easy to hide or disguise. 4 individual powerful suction cups help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally. 5 FT POWER CORD is long enough for easy installation.
  • 【3 Nozzles】Each water pump has 3 nozzles for option: 0.51″/0.63″/0.75″. The different Nozzles can creat different water feature as you desired. Threaded fittings make it more stable. Detachable and cleanable.
  • 【Widely Applied】: High Performance Energy-efficient Pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Yokgrass 800GPH Submersible Pump(3000L/H), Ultra Quiet Adjustable Water Pump with 10ft High Lift, Fountain Pump with 5ft Power Cord, 3 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

400 GPH Submersible Utility Pump + Recirculating Draft Line Cleaning Build

Aquastore 400GPH 25W Submersible Water Pump Ultra Quiet Fountain Water Pump with US Plug,usded as Aquarium Pump,Fountain Pump, Statuary Pump, Pond Pump,Fish Tank Pump, Hydroponic Pump,Waterfall Pump

Aquastore 400GPH 25W Submersible Water Pump

More Info

From the product description, check product page for current description, price and availability:

  • 400GPH 1500L/H Submersible Water Pump, 25W aquarium circulation pump and fountain water pump,2 Meters max lift, 6 feet UL listed 3-core cord with 3pin plug,with 3 nozzles;
  • Wide Application-The Aquastore submersible pump comes with ultra quiet design and perfect durable 25W motor. perfect for use as aquarium pump, fountains pumps, statuary ,landscaping, water feature pump,waterfall pumps ,table top fountain pump,spout, pond pump, water gardens pump and hydroponic systems pump, etc;
  • Adjustable flow rate pump-designed with a adjusting knob, can adjust the water flow rate;with 4 strong rubber suction cups help to stick the pump steadily in the aquarium either vertically or horizontally;
  • With 3 barbed outlet adapter ,in outside diameter of 0.51inch/0.62 inch/0.75inch;nozzle threaded design makes it more stable ;
  • Detachable & Cleanable-the pump doesn’t need tools to disassemble and its very easy to clean and install;

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Aquastore 400GPH 25W Submersible Water Pump Ultra Quiet Fountain Water Pump with US Plug,usded as Aquarium Pump,Fountain Pump, Statuary Pump, Pond Pump,Fish Tank Pump, Hydroponic Pump,Waterfall Pump – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Recirculating Draft Line Cleaning Build

Winkeyes 400GPH Pump

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles

– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

 

Continue reading