MoreBeer’s FermWrap Fermentation Heater – on sale for $25.49 + use it to remove keg labels

 FermWrap Fermentation Heater FE650

FermWrap Fermentation Heater from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Keep your yeast happy and your ferment warm during those cold winter months with this flexible heater wrap! Don’t be fooled by imitators and cheap knock-offs, this is the original FermWrap that has been produced by Fermentap for over a decade. Unlike those old heater belts, the FermWrap covers a wide area of your carboy or fermentation vessel, promoting an even heat distribution. Using tape to adhere, the FermWrap can be attached directly to your fermenter, or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20°F. This differential can be increased by using the BrewBuilt™ Neoprene Carboy Sleeve.

With 40 watts of heat spread over almost two square feet, it provides gentle, even heating.

For more precise results, we recommend a temp controller and carboy thermowell. The controller will monitor the fermentation temp and only power on the FermWrap if the temperature drops below your set point. For the ultimate level of control, we recommend pairing it with the BrewBuilt CoolStix™ to provide cooling. With both accessories plugged into the temp controller, you’ll get cooling or heating whenever you need it.

Specs:

  • 40 watts
  • 115V
  • 11″ H x 25″ W

Item does not include carboy as pictured.


 

The FermWrap Heater FE650

Check sale or product page for current availability & pricing

Alternate Use Tip

I use a similar heat mat to help remove stubborn keg labels.  See: Removing Keg Labels… A Trick That Makes it Easy! – a section of our keg rebuild how-to

Related: Maintaining Fermentation Temps in Colder Weather

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Inkbird ITC-308 Digital Temperature Controller| Review

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Leave a Reply