Category Archives: Kettles

Ends Soon, Stacking Deals: 44% OFF BrewBuilt­ Brewing Kettles with Tri-Clamp Fittings!

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings from MoreBeer!


From the product description, check product page for current description, price and availability:

Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!

T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.

Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.

This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.

Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.

Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.

Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.

Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!


10, 15, 20 and 30 gallon sizes are available.

  • For a limited time MoreBeer has all sizes marked down a whopping 30%.
  • + Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
  • All sizes ship for free to addresses in the contiguous US.

The stacking deals add up to a whopping 40% discount!

BrewBuilt® Brewing Kettle | 1.5″ Tri-Clamp | Dual Port – remember BBKETTLE4ME for the stacking deal

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

IMUSA 52 Quart Kettle and False Bottom

IMUSA 52 Quart Tamale Steamer and False Bottom

IMUSA 52 Quart Kettle and False Bottom

More Info


Highlighted Features
  • Made of Aluminum
  • Removable Steamer Insert
  • Can be used as a Stock pot without insert
  • Heavy duty, durable and easy to use
  • Ideal for Tamales, Lobster, Mussels, Corn on the Cob and More

 

This has a steamer insert/false bottom that could potentially be handy for Brew in a Bag/BIAB style brews.

IMUSA USA Jumbo Tamale/Seafood Steamer 52-Quart, Silver– affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More BIAB-Related!


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stacking Deals = 44% OFF BrewBuilt­ Brewing Kettles with Tri-Clamp Fittings!

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings from MoreBeer!


From the product description, check product page for current description, price and availability:

Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!

T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.

Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.

This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.

Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.

Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.

Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.

Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!


10, 15, 20 and 30 gallon sizes are available.

  • For a limited time MoreBeer has all sizes marked down a whopping 30%.
  • + Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
  • All sizes ship for free to addresses in the contiguous US.

The stacking deals add up to a whopping 40% discount!

BrewBuilt® Brewing Kettle | 1.5″ Tri-Clamp | Dual Port – remember BBKETTLE4ME for the stacking deal

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Stacking Deals = Massive Savings on BrewBuilt­ Brewing Kettles with Tri-Clamp Fittings!

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings from MoreBeer!


From the product description, check product page for current description, price and availability:

Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!

T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.

Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.

This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.

Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.

Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.

Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.

Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!


10, 15, 20 and 30 gallon sizes are available.

  • For a limited time MoreBeer has all sizes marked down a whopping 30%.
  • + Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
  • All sizes ship for free to addresses in the contiguous US.

The stacking deals add up to a whopping 40% discount!

BrewBuilt® Brewing Kettle | 1.5″ Tri-Clamp | Dual Port – remember BBKETTLE4ME for the stacking deal

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Massive Savings on BrewBuilt Tri-Clamp Kettles

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings from MoreBeer!


From the product description, check product page for current description, price and availability:

Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!

T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.

Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.

This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.

Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.

Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.

Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.

Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!


10, 15, 20 and 30 gallon sizes are available.

  • For a limited time MoreBeer has all sizes marked down a whopping 30%.
  • + Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
  • All sizes ship for free to addresses in the contiguous US.

The stacking deals add up to a whopping 40% discount!

BrewBuilt® Brewing Kettle | 1.5″ Tri-Clamp | Dual Port – remember BBKETTLE4ME for the stacking deal

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Stacking Deals… 44% OFF BrewBuilt­ Brewing Kettles with Tri-Clamp Fittings!

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings from MoreBeer!


From the product description, check product page for current description, price and availability:

Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!

T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.

Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.

This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.

Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.

Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.

Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.

Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!


10, 15, 20 and 30 gallon sizes are available.

  • For a limited time MoreBeer has all sizes marked down a whopping 30%.
  • + Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
  • All sizes ship for free to addresses in the contiguous US.

The stacking deals add up to a whopping 40% discount!

BrewBuilt® Brewing Kettle | 1.5″ Tri-Clamp | Dual Port – remember BBKETTLE4ME for the stacking deal

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Stacking Deals… 44% OFF BrewBuilt­ Brewing Kettles with Tri-Clamp Fittings!

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings from MoreBeer!


From the product description, check product page for current description, price and availability:

Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!

T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.

Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.

This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.

Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.

Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.

Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.

Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!


10, 15, 20 and 30 gallon sizes are available.

  • For a limited time MoreBeer has all sizes marked down a whopping 30%.
  • + Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
  • All sizes ship for free to addresses in the contiguous US.

The stacking deals add up to a whopping 40% discount!

BrewBuilt® Brewing Kettle | 1.5″ Tri-Clamp | Dual Port – remember BBKETTLE4ME for the stacking deal

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. 11.17.19 tag:watchan Announcing: BrewBuilt­ Brewing Kettles with Tri-Clamp Fittings

15.5 Gallon Keggle with TWO Welded Ports – HALF OFF Coupon

Homebrew Kettle With Two Horizontal 1/2" Couplings - 15.5 Gallons

Homebrew Kettle With Two Horizontal 1/2″ Couplings – 15.5 Gallons

More Info

From the product description, check product page for current description, price and availability:

Inline Half Barrel Brew Kettle With Two Welded 1/2″ Couplings.
These are brand new half barrels that we’ve had the top removed and 2 full 1/2″ female couplings welded next to each other. This allows you to put your kettles as close as you want to each other and still be able to read the Thermometer.
It is highly recommended that you use a heat shield with this type of kettle to protect your thermometer.
Choose from optional stainless steel and brass ball valve and pickup tube accessories.


 

12″ diameter opening and full 1/2″ female coupling.  Optional add-ons include lid, ball valve (choose from brass or stainless) and a pickup tube.

The full 1/2″ welded coupling means no messing around with weldless kits. “Full” means it’s threaded on the inside and out

Homebrew Kettle With Two Horizontal 1/2″ Couplings – 15.5 Gallons

Get HALF OFF:

homebrewing.org clearance sale

As of this posting, coupon code SLASH50 takes 50% off select gear and supplies at AIH. All sales final

Clearance Sale – remember promo code SLASH50

Also: Check out my step by step process for brewing small batch all grain on my stove top.  Includes a spreadsheet to help make water volume and temp calculations a breeze.

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Stacking Deals… 44% OFF BrewBuilt­ Brewing Kettles with Tri-Clamp Fittings!

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings from MoreBeer!


From the product description, check product page for current description, price and availability:

Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!

T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.

Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.

This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.

Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.

Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.

Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.

Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!


10, 15, 20 and 30 gallon sizes are available.

  • For a limited time MoreBeer has all sizes marked down a whopping 30%.
  • + Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
  • All sizes ship for free to addresses in the contiguous US.

The stacking deals add up to a whopping 40% discount!

BrewBuilt® Brewing Kettle | 1.5″ Tri-Clamp | Dual Port – remember BBKETTLE4ME for the stacking deal

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Chapman Equipment Stainless Steel 14 Gallon UniVessel – works as Kettle AND Fermenter

Chapman Portless 14 Gallon Stainless Steel Fermenter

14 Gallon Stainless Steel Fermenter by Chapman Brewing Equipment

More Info


Highlighted Features
  • Comes Ready to Use
  • Easy to clean
  • Perfect for 10 gallon batches with plenty of head space
  • 17" inner diameter, 20" height (19" at widest point and 24" height including airlock)
  • Doubles as a kettle

 

This is a UniVessel fermenter because it can double as a kettle.  You can boil and ferment in the same vessel.

Chapman Portless 14 Gallon Stainless Steel Fermenter – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Availability of these has been touch and go. Along those lines, I’m calling this one volatile.


More Fermentation Related!

 


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Hands on Review: BrewZilla Gen 4 All Grain Brewing System – New Tips & Tricks + DEAL Ends Tonight

Updated: August 1, 2024

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Hands on Review BrewZilla Gen4

I’ve brewed on several different all-in-one units. Like any brew system, they each have their own strengths and weaknesses. I did a hands-on review of the Robobrew when it first came out in late 2016. It has since changed its name to BrewZilla and is on the 4th generation of the brew unit. As you’d expect with repeated generations, they’ve been able to focus on fixing deficiencies in their previous models and also introduce new features.


Limited Time Deal! (ends 8/1)

Brewzilla 35 Liter Gen 4 110 volt

  • For a short time William’s Brewing has the 35L Gen 4 on sale for $509.99
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

Brewzilla 35 Liter Gen 4 110 volt

New Article: BrewZilla Tips and Tricks!

BrewZilla Gen 4 Temperature Control and Programming Tips and Tricks


The basic premise of an all-in-one brewing system is that your mash and boil kettle are in the

same vessel. So just like Brew In A Bag, after mashing, you pull the grains out and the wort stays behind to be boiled. They use electricity for heat, so they can be used outdoors where you can reach power or indoors where you have a venting system that can take care of all the steam you make during your boil.

BrewZilla Without Jacket

Stamped Volume Markings

Here are some basic stats on the Gen4 BrewZilla. It’s available in a 35-Liter form (for 5-6 gallon batches) with either a 110V setup, or 220V. There is also a larger 65-Liter that is only 220V (targeted to 10-12 gallon batches). The 35L unit holds 9.25 gallons, the mash basket can hold up to 23.5 lbs. of grain, and its electric heating elements can output up to 1500W of power (110V system) or 2400W of power (220V system). The 65L unit holds 17.1 gallons, the mash basket holds 41.5 lbs. of grain, and 3500W of heating power. All the Gen4 units have a pump bolted into the base. The pump can be used not only for wort recirculation during the mash, but also to pump beer through your wort chiller apparatus (should you choose to not use the immersion chiller coil included with the BrewZilla). The pump is more modular and accessible than previous Gen models. To protect the pump from clogging with hop debris during the boil or whirlpool, there is a filter screen (a perforated stainless disc that sits at the bottom of the unit) that sits at the bottom of the kettle. The small magnetic drive pump has a pump head rating of 1.5 – 2.1 m (4.9 – 6.9 ft) and a max flow rate of 11-12 L/min (2.9 – 3.2 gal/min).

Control Panel Notification During Mash Profile

One of the key upgraded features of the Gen4 BrewZilla is the controller. RAPT Is Kegland’s line of wireless connected brewing devices. The BrewZilla now has a RAPT controller so it adds a lot of features that can be monitored and controlled over Wi-Fi. This includes basic things like monitoring temperature from your laptop/cell phone, but also allows you to program complex mash programs online and then download to your BrewZilla. You can also adjust control parameters on the fly such as pump output duty cycle and heater output level. If you get the optional Bluetooth thermometer, you can stick the temperature probe into the middle of your grain bed, and then have the controller use that as its control signal in combination with the built-in temperature sensor that sits on the floor of the unit.

Bluetooth Temp Probe in Middle of Mash

Although All-in-One units are essentially BIAB, they use a stainless steel basket with holes in the bottom of it instead of a bag, and call it a “malt pipe”. These provide functional improvements over a nylon bag. The obvious one is they are way easier to clean. But they also allow you to ensure you get full flow through your grain bed by having holes only on the bottom. This means recirculating wort has no sneak paths out the side. The other benefit is malt pipes have simple brackets/feet welded onto the outside that allow you to lift your wet grains up and prop the malt pipe on the brew rig to drain or sparge. The BrewZilla has 2 sets of feet for this. One set is halfway up, allowing you to do the deadlift of grain & wort halfway and then let the liquid level drain down. Then when you lift it the full height, it’s not as heavy. It’s simple, but makes the process much better.

Welded-on Carry Handle (top) and Tip Handle (bottom)

There is a cool feature in the BrewZilla which normally only comes on much higher end systems, and that’s the central drain. With a concave bottom with a drain at the lowest point in the center, you don’t have to leave wort behind or goof around with tilting it to get the last drops of wort out at the end. This also enables the malt pipe to extend down lower and thus you can hold more grain (30% more than their Gen3). If you compared to other All-in-one units in the “5 gallon batch” size range, the 23.5 lbs. grain capacity is 30 – 50% more. This of course only matters if you’re trying to make high gravity brews. The drain in the floor is plumbed to the inlet of the pump below, and then you can direct pump output either to an external spigot for fast/easy transfer of wort out after brewing, or up the recirculation pipe for wort to get directed down on top of the mash.

Polished Bottom with Center Drain and Built-in Temp Sensor to Side

Bottom Side of Pump Filter Plate

To help with mash efficiency and mash temperature uniformity, they offer a Heat Exchanger Dish, which is just a stainless dish/plate that sits below your malt pipe and above the central drain. Without this dish in place, the flow of recirculating wort tends to go through the center of your grain bed, and straight out the drain. With the dish there, it directs the flow around the full circumference before it gets to the drain, which helps ensure a broader portion of the grist sees the flow.


Compare Prices, Review Continues Below:

Related: BrewZilla Gen 4 Temperature Control and Programming Tips and Tricks

Continue reading

Stacking Deals… 44% OFF BrewBuilt­ Brewing Kettles with Tri-Clamp Fittings!

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings

BrewBuilt­™ Brewing Kettle with Tri-Clamp Fittings from MoreBeer!


From the product description, check product page for current description, price and availability:

Our best-selling BrewBuilt kettles, now available with 1.5″ Tri-Clamp fittings!

T.C. (or Tri-Clover) fittings are the gold standard in professional breweries, and they’re gaining ground in the homebrewing world. The main benefit of T.C. fittings is that they’re generally threadless, which makes them very easy to keep clean and sanitary. These kettles do not include a valve or other fittings, so be sure to check out the “You Might Also Need” section below to add your desired fittings and accessories.

Designed for Brewing. Built to Last. BrewBuilt brew kettles, made from 304 stainless steel, offer an unparalleled mix of features for their price range. At the very top of the list are two welded-in-place T.C. fittings that offer a lifetime of leak-free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that, in our opinion, is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms (BE950) for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up.

This Brew Kettle has a lot to offer…
Some other features we dig include the internal volume markers from the bottom to the top – so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner.

Beefy 304 Stainless
These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 22, 31, and 50 gallon size are made with 1.2mm stainless – that’s pretty thick stuff – and you will know it when you pick one up.

Size Ratios and stuff
All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do.

Unique 22 Gallon Size
This size was born from customer feedback. Many customers making 10 gallons actually want to end up with 10 gallons at the end of kegging. That means you can be starting a boil with 13-14 gallons of wort to account for boil off, kettle loss, and fermenter loss. The 22 Gallon size kettle allows you to boil those quantities with plenty of room for boil overs. Want to make a 15 gallon batch with friends… you can squeeze that in to! You’ll never regret having a little extra kettle.

Final Words
With welded fittings, a bunch of cool features, and a solid, thick 304 stainless steel core this kettle is a pretty amazing value. Remember, if you order BrewBuilt kettle from MoreBeer! we ship free anywhere in the continental USA!


10, 15, 20 and 30 gallon sizes are available.

  • For a limited time MoreBeer has all sizes marked down a whopping 30%.
  • + Stacking 20% Off Coupon! Coupon code BBKETTLE4ME takes another 20% off!
  • All sizes ship for free to addresses in the contiguous US.

The stacking deals add up to a whopping 40% discount!

BrewBuilt® Brewing Kettle | 1.5″ Tri-Clamp | Dual Port – remember BBKETTLE4ME for the stacking deal

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics

pinned

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

morebeer

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Hands on Review: BrewZilla Gen 4 + Last Chance to Save!

Updated: July 31, 2024

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Hands on Review BrewZilla Gen4

I’ve brewed on several different all-in-one units. Like any brew system, they each have their own strengths and weaknesses. I did a hands-on review of the Robobrew when it first came out in late 2016. It has since changed its name to BrewZilla and is on the 4th generation of the brew unit. As you’d expect with repeated generations, they’ve been able to focus on fixing deficiencies in their previous models and also introduce new features.


Limited Time Deals! Choose from Two

Save on 35L at William’s Brewing (ends 8/1):

Brewzilla 35 Liter Gen 4 110 volt

  • For a short time William’s Brewing has the 35L Gen 4 on sale for $509.99
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

Brewzilla 35 Liter Gen 4 110 volt

MoreBeer Summer Sale (ends 7/31):

 

MoreBeer’s Summer Sale!

The lineup includes two BrewZilla models.

New Config Walkthrough!

BrewZilla Gen 4 Temperature Control and Programming Tips and Tricks


The basic premise of an all-in-one brewing system is that your mash and boil kettle are in the

same vessel. So just like Brew In A Bag, after mashing, you pull the grains out and the wort stays behind to be boiled. They use electricity for heat, so they can be used outdoors where you can reach power or indoors where you have a venting system that can take care of all the steam you make during your boil.

BrewZilla Without Jacket

Stamped Volume Markings

Here are some basic stats on the Gen4 BrewZilla. It’s available in a 35-Liter form (for 5-6 gallon batches) with either a 110V setup, or 220V. There is also a larger 65-Liter that is only 220V (targeted to 10-12 gallon batches). The 35L unit holds 9.25 gallons, the mash basket can hold up to 23.5 lbs. of grain, and its electric heating elements can output up to 1500W of power (110V system) or 2400W of power (220V system). The 65L unit holds 17.1 gallons, the mash basket holds 41.5 lbs. of grain, and 3500W of heating power. All the Gen4 units have a pump bolted into the base. The pump can be used not only for wort recirculation during the mash, but also to pump beer through your wort chiller apparatus (should you choose to not use the immersion chiller coil included with the BrewZilla). The pump is more modular and accessible than previous Gen models. To protect the pump from clogging with hop debris during the boil or whirlpool, there is a filter screen (a perforated stainless disc that sits at the bottom of the unit) that sits at the bottom of the kettle. The small magnetic drive pump has a pump head rating of 1.5 – 2.1 m (4.9 – 6.9 ft) and a max flow rate of 11-12 L/min (2.9 – 3.2 gal/min).

Control Panel Notification During Mash Profile

One of the key upgraded features of the Gen4 BrewZilla is the controller. RAPT Is Kegland’s line of wireless connected brewing devices. The BrewZilla now has a RAPT controller so it adds a lot of features that can be monitored and controlled over Wi-Fi. This includes basic things like monitoring temperature from your laptop/cell phone, but also allows you to program complex mash programs online and then download to your BrewZilla. You can also adjust control parameters on the fly such as pump output duty cycle and heater output level. If you get the optional Bluetooth thermometer, you can stick the temperature probe into the middle of your grain bed, and then have the controller use that as its control signal in combination with the built-in temperature sensor that sits on the floor of the unit.

Bluetooth Temp Probe in Middle of Mash

Although All-in-One units are essentially BIAB, they use a stainless steel basket with holes in the bottom of it instead of a bag, and call it a “malt pipe”. These provide functional improvements over a nylon bag. The obvious one is they are way easier to clean. But they also allow you to ensure you get full flow through your grain bed by having holes only on the bottom. This means recirculating wort has no sneak paths out the side. The other benefit is malt pipes have simple brackets/feet welded onto the outside that allow you to lift your wet grains up and prop the malt pipe on the brew rig to drain or sparge. The BrewZilla has 2 sets of feet for this. One set is halfway up, allowing you to do the deadlift of grain & wort halfway and then let the liquid level drain down. Then when you lift it the full height, it’s not as heavy. It’s simple, but makes the process much better.

Welded-on Carry Handle (top) and Tip Handle (bottom)

There is a cool feature in the BrewZilla which normally only comes on much higher end systems, and that’s the central drain. With a concave bottom with a drain at the lowest point in the center, you don’t have to leave wort behind or goof around with tilting it to get the last drops of wort out at the end. This also enables the malt pipe to extend down lower and thus you can hold more grain (30% more than their Gen3). If you compared to other All-in-one units in the “5 gallon batch” size range, the 23.5 lbs. grain capacity is 30 – 50% more. This of course only matters if you’re trying to make high gravity brews. The drain in the floor is plumbed to the inlet of the pump below, and then you can direct pump output either to an external spigot for fast/easy transfer of wort out after brewing, or up the recirculation pipe for wort to get directed down on top of the mash.

Polished Bottom with Center Drain and Built-in Temp Sensor to Side

Bottom Side of Pump Filter Plate

To help with mash efficiency and mash temperature uniformity, they offer a Heat Exchanger Dish, which is just a stainless dish/plate that sits below your malt pipe and above the central drain. Without this dish in place, the flow of recirculating wort tends to go through the center of your grain bed, and straight out the drain. With the dish there, it directs the flow around the full circumference before it gets to the drain, which helps ensure a broader portion of the grist sees the flow.


Compare Prices, Review Continues Below:

Related: BrewZilla Gen 4 Temperature Control and Programming Tips and Tricks

Continue reading

BrewZilla Gen 4 Temperature Control and Programming Tips and Tricks + Limited Time DEAL!

July 24, 2024

This write up is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

BrewZilla Gen4 Temperature Control and Programming Tips and Tricks

The BrewZilla Gen4 has a list of features that make it unique from other All-In-One brew units. Those are covered here: https://www.homebrewfinds.com/hands-on-review-brewzilla/. But there are some significant functions and features that need a deeper look to fully understand them. In this write-up, I will focus on temperature control as well as programming tips to automate your brew day.

Temperature

When I first got the BrewZilla Gen 4 with the Bluetooth temperature probe, I didn’t understand it. I thought it just gave me the option to use either the temperature sensor in the base of the unit (like most other AIO units), or the Bluetooth as a wireless probe sitting in the grain bed. But that’s not it. It uses both sensors SIMULTANEOUSLY. No mass market controller does that- AIO or otherwise. To get that kind of functionality you’re talking a custom-built controller running some of the advanced brew control software.


Learn More: Hands on Review: BrewZilla All Grain Brewing System!


Kegland’s implementation of dual-probe control is very simple and straightforward in the BrewZilla. To best understand how this works, you need to think of your system in its recirculation loop. The wort drains down from the grain bed to the bottom, gets heated by the elements in the base, then gets sucked into the pump to get dumped on top of the grain again. The Bluetooth probe sits in the middle of the grain bed, and base sensor sits in the small volume of wort getting heated by the elements. When you’re at a steady target temperature, both of these probes should read about the same, as you ideally have uniform temperature throughout your system.


Limited Time Deals! Choose from Two

Save on 35L at William’s Brewing

  • For a short time William’s Brewing has the 35L Gen 4 on sale for $509.99
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

Brewzilla 35 Liter Gen 4 110 volt

MoreBeer Summer Sale!

MoreBeer’s Summer Sale!

The lineup includes two BrewZilla models.

New Config Walkthrough!

BrewZilla Gen 4 Temperature Control and Programming Tips and Tricks


Compare BrewZilla Prices, How-To Continues Below:

Continue reading

Hands on Review: BrewZilla Gen 4 All Grain Brewing System – TWO Deals + New Config Walkthrough

Updated: July 24, 2024

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Hands on Review BrewZilla Gen4

I’ve brewed on several different all-in-one units. Like any brew system, they each have their own strengths and weaknesses. I did a hands-on review of the Robobrew when it first came out in late 2016. It has since changed its name to BrewZilla and is on the 4th generation of the brew unit. As you’d expect with repeated generations, they’ve been able to focus on fixing deficiencies in their previous models and also introduce new features.


Limited Time Deals! Choose from Two

Save on 35L at William’s Brewing

  • For a short time William’s Brewing has the 35L Gen 4 on sale for $509.99
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

Brewzilla 35 Liter Gen 4 110 volt

MoreBeer Summer Sale!

 

MoreBeer’s Summer Sale!

The lineup includes two BrewZilla models.

New Config Walkthrough!

BrewZilla Gen 4 Temperature Control and Programming Tips and Tricks


The basic premise of an all-in-one brewing system is that your mash and boil kettle are in the

same vessel. So just like Brew In A Bag, after mashing, you pull the grains out and the wort stays behind to be boiled. They use electricity for heat, so they can be used outdoors where you can reach power or indoors where you have a venting system that can take care of all the steam you make during your boil.

BrewZilla Without Jacket

Stamped Volume Markings

Here are some basic stats on the Gen4 BrewZilla. It’s available in a 35-Liter form (for 5-6 gallon batches) with either a 110V setup, or 220V. There is also a larger 65-Liter that is only 220V (targeted to 10-12 gallon batches). The 35L unit holds 9.25 gallons, the mash basket can hold up to 23.5 lbs. of grain, and its electric heating elements can output up to 1500W of power (110V system) or 2400W of power (220V system). The 65L unit holds 17.1 gallons, the mash basket holds 41.5 lbs. of grain, and 3500W of heating power. All the Gen4 units have a pump bolted into the base. The pump can be used not only for wort recirculation during the mash, but also to pump beer through your wort chiller apparatus (should you choose to not use the immersion chiller coil included with the BrewZilla). The pump is more modular and accessible than previous Gen models. To protect the pump from clogging with hop debris during the boil or whirlpool, there is a filter screen (a perforated stainless disc that sits at the bottom of the unit) that sits at the bottom of the kettle. The small magnetic drive pump has a pump head rating of 1.5 – 2.1 m (4.9 – 6.9 ft) and a max flow rate of 11-12 L/min (2.9 – 3.2 gal/min).

Control Panel Notification During Mash Profile

One of the key upgraded features of the Gen4 BrewZilla is the controller. RAPT Is Kegland’s line of wireless connected brewing devices. The BrewZilla now has a RAPT controller so it adds a lot of features that can be monitored and controlled over Wi-Fi. This includes basic things like monitoring temperature from your laptop/cell phone, but also allows you to program complex mash programs online and then download to your BrewZilla. You can also adjust control parameters on the fly such as pump output duty cycle and heater output level. If you get the optional Bluetooth thermometer, you can stick the temperature probe into the middle of your grain bed, and then have the controller use that as its control signal in combination with the built-in temperature sensor that sits on the floor of the unit.

Bluetooth Temp Probe in Middle of Mash

Although All-in-One units are essentially BIAB, they use a stainless steel basket with holes in the bottom of it instead of a bag, and call it a “malt pipe”. These provide functional improvements over a nylon bag. The obvious one is they are way easier to clean. But they also allow you to ensure you get full flow through your grain bed by having holes only on the bottom. This means recirculating wort has no sneak paths out the side. The other benefit is malt pipes have simple brackets/feet welded onto the outside that allow you to lift your wet grains up and prop the malt pipe on the brew rig to drain or sparge. The BrewZilla has 2 sets of feet for this. One set is halfway up, allowing you to do the deadlift of grain & wort halfway and then let the liquid level drain down. Then when you lift it the full height, it’s not as heavy. It’s simple, but makes the process much better.

Welded-on Carry Handle (top) and Tip Handle (bottom)

There is a cool feature in the BrewZilla which normally only comes on much higher end systems, and that’s the central drain. With a concave bottom with a drain at the lowest point in the center, you don’t have to leave wort behind or goof around with tilting it to get the last drops of wort out at the end. This also enables the malt pipe to extend down lower and thus you can hold more grain (30% more than their Gen3). If you compared to other All-in-one units in the “5 gallon batch” size range, the 23.5 lbs. grain capacity is 30 – 50% more. This of course only matters if you’re trying to make high gravity brews. The drain in the floor is plumbed to the inlet of the pump below, and then you can direct pump output either to an external spigot for fast/easy transfer of wort out after brewing, or up the recirculation pipe for wort to get directed down on top of the mash.

Polished Bottom with Center Drain and Built-in Temp Sensor to Side

Bottom Side of Pump Filter Plate

To help with mash efficiency and mash temperature uniformity, they offer a Heat Exchanger Dish, which is just a stainless dish/plate that sits below your malt pipe and above the central drain. Without this dish in place, the flow of recirculating wort tends to go through the center of your grain bed, and straight out the drain. With the dish there, it directs the flow around the full circumference before it gets to the drain, which helps ensure a broader portion of the grist sees the flow.


Compare Prices, Review Continues Below:

Related: BrewZilla Gen 4 Temperature Control and Programming Tips and Tricks

Continue reading

Almost Gone… 15.5 Gallon Keggle with TWO Welded Ports – $109.95, OVER 50% Off Closeout

Homebrew Kettle With Two Horizontal 1/2" Couplings - 15.5 Gallons

Homebrew Kettle With Two Horizontal 1/2″ Couplings – 15.5 Gallons

More Info

From the product description, check product page for current description, price and availability:

Inline Half Barrel Brew Kettle With Two Welded 1/2″ Couplings.
These are brand new half barrels that we’ve had the top removed and 2 full 1/2″ female couplings welded next to each other. This allows you to put your kettles as close as you want to each other and still be able to read the Thermometer.
It is highly recommended that you use a heat shield with this type of kettle to protect your thermometer.
Choose from optional stainless steel and brass ball valve and pickup tube accessories.


 

12″ diameter opening and full 1/2″ female coupling.  Optional add-ons include lid, ball valve (choose from brass or stainless) and a pickup tube.

The full 1/2″ welded coupling means no messing around with weldless kits. “Full” means it’s threaded on the inside and out

These are on closeout for just $109.95. That’s MORE THAN HALF OFF list.

Homebrew Kettle With Two Horizontal 1/2″ Couplings – 15.5 Gallons

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Hands on Review: Kegland BrewZilla Electric Brewing System

Updated: July 24, 2024

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Hands on Review BrewZilla Gen4

I’ve brewed on several different all-in-one units. Like any brew system, they each have their own strengths and weaknesses. I did a hands-on review of the Robobrew when it first came out in late 2016. It has since changed its name to BrewZilla and is on the 4th generation of the brew unit. As you’d expect with repeated generations, they’ve been able to focus on fixing deficiencies in their previous models and also introduce new features.

The basic premise of an all-in-one brewing system is that your mash and boil kettle are in the

same vessel. So just like Brew In A Bag, after mashing, you pull the grains out and the wort stays behind to be boiled. They use electricity for heat, so they can be used outdoors where you can reach power or indoors where you have a venting system that can take care of all the steam you make during your boil.

BrewZilla Without Jacket

Stamped Volume Markings

Here are some basic stats on the Gen4 BrewZilla. It’s available in a 35-Liter form (for 5-6 gallon batches) with either a 110V setup, or 220V. There is also a larger 65-Liter that is only 220V (targeted to 10-12 gallon batches). The 35L unit holds 9.25 gallons, the mash basket can hold up to 23.5 lbs. of grain, and its electric heating elements can output up to 1500W of power (110V system) or 2400W of power (220V system). The 65L unit holds 17.1 gallons, the mash basket holds 41.5 lbs. of grain, and 3500W of heating power. All the Gen4 units have a pump bolted into the base. The pump can be used not only for wort recirculation during the mash, but also to pump beer through your wort chiller apparatus (should you choose to not use the immersion chiller coil included with the BrewZilla). The pump is more modular and accessible than previous Gen models. To protect the pump from clogging with hop debris during the boil or whirlpool, there is a filter screen (a perforated stainless disc that sits at the bottom of the unit) that sits at the bottom of the kettle. The small magnetic drive pump has a pump head rating of 1.5 – 2.1 m (4.9 – 6.9 ft) and a max flow rate of 11-12 L/min (2.9 – 3.2 gal/min).

Control Panel Notification During Mash Profile

One of the key upgraded features of the Gen4 BrewZilla is the controller. RAPT Is Kegland’s line of wireless connected brewing devices. The BrewZilla now has a RAPT controller so it adds a lot of features that can be monitored and controlled over Wi-Fi. This includes basic things like monitoring temperature from your laptop/cell phone, but also allows you to program complex mash programs online and then download to your BrewZilla. You can also adjust control parameters on the fly such as pump output duty cycle and heater output level. If you get the optional Bluetooth thermometer, you can stick the temperature probe into the middle of your grain bed, and then have the controller use that as its control signal in combination with the built-in temperature sensor that sits on the floor of the unit.

Bluetooth Temp Probe in Middle of Mash

Although All-in-One units are essentially BIAB, they use a stainless steel basket with holes in the bottom of it instead of a bag, and call it a “malt pipe”. These provide functional improvements over a nylon bag. The obvious one is they are way easier to clean. But they also allow you to ensure you get full flow through your grain bed by having holes only on the bottom. This means recirculating wort has no sneak paths out the side. The other benefit is malt pipes have simple brackets/feet welded onto the outside that allow you to lift your wet grains up and prop the malt pipe on the brew rig to drain or sparge. The BrewZilla has 2 sets of feet for this. One set is halfway up, allowing you to do the deadlift of grain & wort halfway and then let the liquid level drain down. Then when you lift it the full height, it’s not as heavy. It’s simple, but makes the process much better.

Welded-on Carry Handle (top) and Tip Handle (bottom)

There is a cool feature in the BrewZilla which normally only comes on much higher end systems, and that’s the central drain. With a concave bottom with a drain at the lowest point in the center, you don’t have to leave wort behind or goof around with tilting it to get the last drops of wort out at the end. This also enables the malt pipe to extend down lower and thus you can hold more grain (30% more than their Gen3). If you compared to other All-in-one units in the “5 gallon batch” size range, the 23.5 lbs. grain capacity is 30 – 50% more. This of course only matters if you’re trying to make high gravity brews. The drain in the floor is plumbed to the inlet of the pump below, and then you can direct pump output either to an external spigot for fast/easy transfer of wort out after brewing, or up the recirculation pipe for wort to get directed down on top of the mash.

Polished Bottom with Center Drain and Built-in Temp Sensor to Side

Bottom Side of Pump Filter Plate

To help with mash efficiency and mash temperature uniformity, they offer a Heat Exchanger Dish, which is just a stainless dish/plate that sits below your malt pipe and above the central drain. Without this dish in place, the flow of recirculating wort tends to go through the center of your grain bed, and straight out the drain. With the dish there, it directs the flow around the full circumference before it gets to the drain, which helps ensure a broader portion of the grist sees the flow.


Compare Prices, Review Continues Below:

Related: BrewZilla Gen 4 Temperature Control and Programming Tips and Tricks

Continue reading

Hands on Review: Anvil Foundry Brewing System

anvil brewing equipment foundry review

July 7,2024

This review is by Homebrew Finds Contributor Brad Probert.  Brad is an engineer, expert homebrewer and experienced reviewer.  Grab a link to Brad’s website at the end of this review.

Anvil Brewing Equipment Foundry

There are a lot of all-in-one electric brew rigs on the market. The entry to all-grain for most was through a converted cooler 3-vessel system. It was the cheapest way to get into all-grain, and why so many of us came that way. Precision control and/or electric heating convenience came at a premium that you would upgrade to later. Well, those are now relegated to “old timer stories”. At the all-grain entry level price point, you can now get an all-in-one electric unit from Anvil for the price you’d pay for an Igloo cooler kit with a burner and pot. So now those getting into all-grain can start with the precision of digital temperature control, and the weather-proof convenience of an electric heat source.


Compare Models, Prices and Availability, Review Continues Below:

These are affiliate links, note that multiple variations of this product may be available, as such a different version may appear at these links


Comparing Anvil Foundry Versions

The Anvil Foundry comes in two sizes, a 10.5 gallon and a 6.5 gallon. They share most all of the same features, but the 10.5 is targeted at 4-5 gallon batches, and the 6.5 for 2.5 gallon batches. There’s also an accessory you can order for the 10.5 to insert in the mash basket and then go as low as 2 gallon batches. Both of these units come with the option to add on a recirculation kit, which provides a pump and some other hardware bits to allow you to recirculate wort during the mash. Every unit also has a simple switch you can change to run on 120V or 240V. However, the unit comes with a 3-prong 120V plug, so if you do opt for the 240V setting, you have to cut the plug off and attach the appropriate 240V plug type.

Continue reading

Almost Gone… 15.5 Gallon Keggle with TWO Welded Ports – $109.95, OVER 50% Off Closeout

Homebrew Kettle With Two Horizontal 1/2" Couplings - 15.5 Gallons

Homebrew Kettle With Two Horizontal 1/2″ Couplings – 15.5 Gallons

More Info

From the product description, check product page for current description, price and availability:

Inline Half Barrel Brew Kettle With Two Welded 1/2″ Couplings.
These are brand new half barrels that we’ve had the top removed and 2 full 1/2″ female couplings welded next to each other. This allows you to put your kettles as close as you want to each other and still be able to read the Thermometer.
It is highly recommended that you use a heat shield with this type of kettle to protect your thermometer.
Choose from optional stainless steel and brass ball valve and pickup tube accessories.


 

12″ diameter opening and full 1/2″ female coupling.  Optional add-ons include lid, ball valve (choose from brass or stainless) and a pickup tube.

The full 1/2″ welded coupling means no messing around with weldless kits. “Full” means it’s threaded on the inside and out

These are on closeout for just $109.95. That’s MORE THAN HALF OFF list.

Homebrew Kettle With Two Horizontal 1/2″ Couplings – 15.5 Gallons

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

KegLand DigiBoil Electric Brew Kettle Deal at William’s Brewing

KegLand 35 Liter Digiboil (110 volts)

KegLand Digiboil from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The KegLand Digiboil is an 8 gallon electric brew pot with precise digital control. Made of 304 stainless steel, it features 1500 watts of total power, selectable with both a 1000 watt and 500 watt switch. Perfect for brewing, distilling, sous vide cooking, and more. Keep in mind that although it has an 8 gallon capacity, we recommend you boil no more than 6.5 gallons, to allow head space to prevent damaging boil overs.

The digital display can be set to any temperature between 32° and 212° F, and hold that temperature to plus or minus 5 degrees. The valve features standard 1/2″ threads, so you can fit female NPT 1/2″ accessories such as cam lock fittings to the spigot for attaching chillers and other accessories. The rim features clamps, and standard Robobrew and Grainfather distilling lids will fit perfectly. 27″ tall, 12″ wide.

This unit draws a hefty 15 amps, and must be plugged into a dedicated GGCI outlet for safety. The unit should not be submersed in water.

The Digiboil does not come with a printed manual, but it is very simple. One of the first things you will notice is that it is set in Centigrade. To switch to Fahrenheit, with the unit on and both element switches off, press the plus and minus keys simultaneously for 5 seconds to switch it to Fahrenheit display mode. To set the temperature, turn it on with water in the boiler, and press either the plus or minus key until the set point starts moving, and release when your desired temperature set point has been reached.

When brewing with malt extract, you will need to get your water boiling, then shut off the heat momentarily while you stir the extract in to dissolve. This eliminates the extract from burning on the bottom, and prevents the thermostat protective circuit from throwing an error. As soon as the extract is dissolved, turn back on the heat and brew.

 

KegLand Digiboil

Save via Fall Clearance!

William’s has launched a fall clearance sale that discounts a large selection of items by up 60%. No coupon or promo code is required.  Check William’s for current selection and availability.

Fall Clearance at William’s Brewing

  • Digiboil is included in the mix and on sale for just $169.99.
  • Shipping is free or reasonably priced flat rate to addresses in the lower 48 states depending on your order size for most items.

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability tag:lnksfxd rpu:wmsdigiboil:rpu