Category Archives: Oxygenation

Kegland Oxygen Flow Meter! – DuoTight and MFL – $16.91 via MoreBeer’s Rotating Black Friday Sale

Oxygen Flow Meter w/ Duotight Fittings FE401

Oxygen Flow Meter w/ Duotight Fittings via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Take the guesswork out of oxygenation with this handy flow meter. If you’re using pure O2 to oxygenate your wort, you’re likely using a disposable cylinder with a simple brass regulator, and have no way to measure how much oxygen is actually being added. You’re essentially left to finding the “sweet spot” on the dial when you open the regulator and aim for the same spot on the next use. Get repeatable results by adding this flow meter to your setup. This device will allow you to dial in the flow rate and help you add the same amount of oxygen from batch to batch.

The flow meter comes with male flare thread inlet and outlet and includes two Duotight fittings. It’s ready for use with 8 mm OD EVABarrier tubing right out of the box, or you can add a swivel nut and barb for use with other size tubings.

For a good starting point, we recommend using a 0.5 micron diffusion stone and adding pure O2 at a 1L/minute flow rate for 60 seconds to acheive the recommened 10-14 ppm dissolved oxygen.

Features:

  • 1/4″ Male Flare Inlet/Outlet
  • Duotight Fittings for 8 mm OD Tubing Included
  • Scaled for 0.1 to 1.4 L/min Flow Rate
  • 3.6″ H x 0.9″ W

 

Why a Flow Meter? Most regulators that homebrewers use for oxygenating wort are simple setups – Example – via William’s Brewing.  They attach to disposable oxygen tanks (typically sourced from a local hardware store) and are little more than on and off valves.  No gauges, no pressure control (other than the degree to which you open and close the valve) and no flow control.

Time and rate give you an idea of how much oxygen you’re really adding to your wort.  Time is easy to track.  Rate, not so much, at least with typical homebrew O2 regulators.  If you want more or less oxygen for your next batch, it’s mostly a guessing game.

Enter a flow meter.  This particular model has a range of 0 to 5 LPM.  This model also appears to have an knob that allows you to adjust the flow rate.  Note: .6 MPa is about 87 PSI.

With both time and flow rate you can establish a more reliable baseline to work off of.  This information should also help you to get better repeatability between brews.

MoreBeer is discounting a slew of gear and ingredients via their Black Friday Sale. They’ve launched a rotating selection of deals early, presumably to try and stave off supply chain related issues. These are their actual Black Friday Deals. If you see something you like, I suggest buying it while you can.

Oxygen Flow Meter w/ Duotight Fittings FE401

Check sale or product page for current availability & pricing

More Fermentation Related!

MORE MoreBeer Deals!…This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Kegland Oxygen Flow Meter! – DuoTight and MFL – $16.91 via MoreBeer’s Rotating Black Friday Sale

Oxygen Flow Meter w/ Duotight Fittings FE401

Oxygen Flow Meter w/ Duotight Fittings via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

Take the guesswork out of oxygenation with this handy flow meter. If you’re using pure O2 to oxygenate your wort, you’re likely using a disposable cylinder with a simple brass regulator, and have no way to measure how much oxygen is actually being added. You’re essentially left to finding the “sweet spot” on the dial when you open the regulator and aim for the same spot on the next use. Get repeatable results by adding this flow meter to your setup. This device will allow you to dial in the flow rate and help you add the same amount of oxygen from batch to batch.

The flow meter comes with male flare thread inlet and outlet and includes two Duotight fittings. It’s ready for use with 8 mm OD EVABarrier tubing right out of the box, or you can add a swivel nut and barb for use with other size tubings.

For a good starting point, we recommend using a 0.5 micron diffusion stone and adding pure O2 at a 1L/minute flow rate for 60 seconds to acheive the recommened 10-14 ppm dissolved oxygen.

Features:

  • 1/4″ Male Flare Inlet/Outlet
  • Duotight Fittings for 8 mm OD Tubing Included
  • Scaled for 0.1 to 1.4 L/min Flow Rate
  • 3.6″ H x 0.9″ W

 

Why a Flow Meter? Most regulators that homebrewers use for oxygenating wort are simple setups – Example – via William’s Brewing.  They attach to disposable oxygen tanks (typically sourced from a local hardware store) and are little more than on and off valves.  No gauges, no pressure control (other than the degree to which you open and close the valve) and no flow control.

Time and rate give you an idea of how much oxygen you’re really adding to your wort.  Time is easy to track.  Rate, not so much, at least with typical homebrew O2 regulators.  If you want more or less oxygen for your next batch, it’s mostly a guessing game.

Enter a flow meter.  This particular model has a range of 0 to 5 LPM.  This model also appears to have an knob that allows you to adjust the flow rate.  Note: .6 MPa is about 87 PSI.

With both time and flow rate you can establish a more reliable baseline to work off of.  This information should also help you to get better repeatability between brews.

MoreBeer is discounting a slew of gear and ingredients via their Black Friday Sale. They’ve launched a rotating selection of deals early, presumably to try and stave off supply chain related issues. These are their actual Black Friday Deals. If you see something you like, I suggest buying it while you can.

Oxygen Flow Meter w/ Duotight Fittings FE401

Check sale or product page for current availability & pricing

More Fermentation Related!

MORE MoreBeer Deals!…This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Stainless Steel Diffusion Stone – Threaded for Easy Cleaning

Stainless Steel Beer Carbonation Aeration Diffusion Stone Homebrew by Happybrew

Stainless Steel Beer Carbonation Aeration Diffusion Stone Homebrew by Happybrew

Possible homebrewing uses include – carbonating, oxygenating and aerating.

Stainless Steel Beer Carbonation Aeration Diffusion Stone Homebrew by Happybrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

williamsbrewing.com oxygenation

Oxygen Air Flow Meter 0.1-5LPM Gas Flowmeter [Assist with Wort Oxygenation]

Flowmeter LZQ-1 Air Flow Rate Gauge 1~5LPM Oxygen Measuring Flowmeter Gauge

Flowmeter LZQ-1 Air Flow Rate Gauge 1~5LPM Oxygen Measuring Flowmeter Gauge

Why An Oxygen Flow Meter?

Most regulators that homebrewers use for oxygenating wort are simple setups – Example – via William’s Brewing.  They attach to disposable oxygen tanks (typically sourced from a local hardware store) and are little more than on and off valves.  No gauges, no pressure control (other than the degree to which you open and close the valve) and no flow control.

Time and rate give you an idea of how much oxygen you’re really adding to your wort.  Time is easy to track.  Rate, not so much, at least with typical homebrew O2 regulators.  If you want more or less oxygen for your next batch, it’s mostly a guessing game.

Enter an oxygen flow meter.  A flow meter, gives you an idea of flow rate

Flowmeter LZQ-1 Air Flow Rate Gauge 1~5LPM Oxygen Measuring Flowmeter Gauge – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

williamsbrewing.com oxygenation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Stainless Steel Diffusion Stone – Threaded for Easy Cleaning

Stainless Steel Beer Carbonation Aeration Diffusion Stone Homebrew by Happybrew

Stainless Steel Beer Carbonation Aeration Diffusion Stone Homebrew by Happybrew

Possible homebrewing uses include – carbonating, oxygenating and aerating.

Stainless Steel Beer Carbonation Aeration Diffusion Stone Homebrew by Happybrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

williamsbrewing.com oxygenation

FOUR x Sanitary Air Filters [Oxygenation, Aeration, Siphon Starting]

Sanitary Air Filter

More Info
Highlighted Features
  • [Fit with the Most Air Line]: 5/16" barbed connections, fit with the most air tubing in homebrew. Barbed fitting fits easily with soft tubings.
  • [High-Efficiency Filter]: Use a small air filter to get clean air for a homebrew system or fish tank. Filters down to 0.5 micron at 99.99% efficiency
  • [Unique Designed Round Filter]: The large round filter has a greater surface area with air than other filters and higher efficiency.
  • [Clean Air for Healthy]: Perfect for aeration or oxygenation systems to Filter out impurity.
  • Package: 4*Filter; Please Note: Do not use this product under high pressure, the safe pressure is about 15psi
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Note from HBF: These type of filters are sometimes used as part of oxygenation or aeration setups.  I’ve also used a similar filter to help start a siphon.  See MoreBeer’s Sterile Siphon Starter for more info on that process.  The basic idea is you use a compatible carboy hood and racking cane and blow into a compatible filter to start the flow of liquid.  The filter used in MoreBeer’s setup looks similar to this one, although I’m not certain it’s identical.

FERRODAY 5/16 Barbed Air Line Filter [4 PCS]- Sanitary Air Filter Air Line Fittings for Beer Brew Keg Air Filter for Homebrew White Air Filter for Fish Tank Translucent Plastic Gas Line Fitting – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

williamsbrewing.com oxygenation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Ferroday 0.5 Micron Stainless Diffusion Stone & Silicone Tubing

Ferroday 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4" Barb & 20" Silicon Hose for Homebrew Wine Beer Soda (Stone0.5)

FERRODAY 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4″ Barb for Homebrew Wine Beer Soda Air Stone 0.5 Micron + 20 Inch Silicone Hose

More Info

From the product description, check product page for current description, price and availability:

  • [ Healthy Food Grade Material]: The Whole 0.5 micron diffusion stone is made of 304 Stainless Steel, which let our 0.5 micron aeration stone anti-corrosion & high temperature resistant & Durable. 20 inch gas line is made of food grade Silicone.
  • [ Unique Carbonated Flavour]: 0.5 micron diffusion stone produces smaller & finer bubbles which can make the gas combines with liquid faster. Make draft beer, home brew soda and other drinks more delicate, more exquisite and more fresh.
  • [ Various Use]: 0.5 Microns aeration stone is best for oxygenation & carbonation. Use this air stone to oxygenate wort and carbonate beer/ soda prior to fermentation. Works great for other drinks as well
  • [ Connect With Fittings]: Attaching the aeration stone barb to a 1/4″ ID hose, and the other side of the hose can be attached with the “gas in” post on a keg and then connect the keg with CO2 regulator.
  • [ Boiled Clean]: The 0.5 micron diffusion stone needs to be boiled in water to get clean & unclog the pores. Sometimes if the aeration stone get blocked, can be dipped in acid for 15 seconds and then rinse with water.

 

Possible homebrewing uses include – carbonating, oxygenating and aerating.

FERRODAY 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4″ Barb for Homebrew Wine Beer Soda Air Stone 0.5 Micron + 20 Inch Silicone Hose – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

williamsbrewing.com oxygenation

FOUR x Sanitary Air Filters [Oxygenation, Aeration, Siphon Starting]

Sanitary Air Filter

More Info
Highlighted Features
  • [Fit with the Most Air Line]: 5/16" barbed connections, fit with the most air tubing in homebrew. Barbed fitting fits easily with soft tubings.
  • [High-Efficiency Filter]: Use a small air filter to get clean air for a homebrew system or fish tank. Filters down to 0.5 micron at 99.99% efficiency
  • [Unique Designed Round Filter]: The large round filter has a greater surface area with air than other filters and higher efficiency.
  • [Clean Air for Healthy]: Perfect for aeration or oxygenation systems to Filter out impurity.
  • Package: 4*Filter; Please Note: Do not use this product under high pressure, the safe pressure is about 15psi
Learn More

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Note from HBF: These type of filters are sometimes used as part of oxygenation or aeration setups.  I’ve also used a similar filter to help start a siphon.  See MoreBeer’s Sterile Siphon Starter for more info on that process.  The basic idea is you use a compatible carboy hood and racking cane and blow into a compatible filter to start the flow of liquid.  The filter used in MoreBeer’s setup looks similar to this one, although I’m not certain it’s identical.

FERRODAY 5/16 Barbed Air Line Filter [4 PCS]- Sanitary Air Filter Air Line Fittings for Beer Brew Keg Air Filter for Homebrew White Air Filter for Fish Tank Translucent Plastic Gas Line Fitting – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

williamsbrewing.com oxygenation

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Oxygen Flow Meter [Assist with Wort Oxygenation]

CNBTR LZQ-3 Acylic Flowmeter Gas Acrylic Metal Fitting Oxygen Flow Meter 0-5 LPM

CNBTR LZQ-3 Acylic Flowmeter Gas Acrylic Metal Fitting Oxygen Flow Meter 0-5 LPM

More Info

From the product description, check product page for current description, price and availability:

  • Center distance: 65.5mm. Connection method: 8MM/0.31Inch (Hose Connection)
  • Easy to use:It is simple to use, and has 8mm barbs for convenient connection to hoses
  • Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry. Flowmeter Interface is connected by Thread Interface.
  • Product function: to measure gas single-phase non-pulsating flow

 

Using a Flow Meter For Increased Repeatability

Most regulators that homebrewers use for oxygenating wort are simple setups – Example – via William’s Brewing.  They attach to disposable oxygen tanks (typically sourced from a local hardware store) and are little more than on and off valves.  No gauges, no pressure control (other than the degree to which you open and close the valve) and no flow control.

Time and rate give you an idea of how much oxygen you’re really adding to your wort.  Time is easy to track.  Rate, not so much, at least with typical homebrew O2 regulators.  If you want more or less oxygen for your next batch, it’s mostly a guessing game.

Enter a flow meter.  This particular model has a range of 0 to 5 LPM.  This model also appears to have an knob that allows you to adjust the flow rate.  Note: .6 MPa is about 87 PSI.

With both time and flow rate you can establish a more reliable baseline to work off of.  This information should also help you to get better repeatability between brews.

Note that these are typically used for medical applications.  I’m not sure what the barb size is.  You will need to figure out tubing and connections to a compatible regulator and aeration/oxygenation stone.

CNBTR LZQ-3 Acylic Flowmeter Gas Acrylic Metal Fitting Oxygen Flow Meter 0-5 LPM – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

williamsbrewing.com oxygenation

Ferroday 0.5 Micron Stainless Diffusion Stone & Silicone Tubing

Ferroday 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4" Barb & 20" Silicon Hose for Homebrew Wine Beer Soda (Stone0.5)

FERRODAY 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4″ Barb for Homebrew Wine Beer Soda Air Stone 0.5 Micron + 20 Inch Silicone Hose

More Info

From the product description, check product page for current description, price and availability:

  • [ Healthy Food Grade Material]: The Whole 0.5 micron diffusion stone is made of 304 Stainless Steel, which let our 0.5 micron aeration stone anti-corrosion & high temperature resistant & Durable. 20 inch gas line is made of food grade Silicone.
  • [ Unique Carbonated Flavour]: 0.5 micron diffusion stone produces smaller & finer bubbles which can make the gas combines with liquid faster. Make draft beer, home brew soda and other drinks more delicate, more exquisite and more fresh.
  • [ Various Use]: 0.5 Microns aeration stone is best for oxygenation & carbonation. Use this air stone to oxygenate wort and carbonate beer/ soda prior to fermentation. Works great for other drinks as well
  • [ Connect With Fittings]: Attaching the aeration stone barb to a 1/4″ ID hose, and the other side of the hose can be attached with the “gas in” post on a keg and then connect the keg with CO2 regulator.
  • [ Boiled Clean]: The 0.5 micron diffusion stone needs to be boiled in water to get clean & unclog the pores. Sometimes if the aeration stone get blocked, can be dipped in acid for 15 seconds and then rinse with water.

 

Possible homebrewing uses include – carbonating, oxygenating and aerating.

FERRODAY 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4″ Barb for Homebrew Wine Beer Soda Air Stone 0.5 Micron + 20 Inch Silicone Hose – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

williamsbrewing.com oxygenation

.5 Micron Stainless Steel Diffusion Stone – for aeration & carbonation

Stainless Steel Diffusion Stone, 0.5 Micron Aeration Stone, Carbonation Stone With 1/4" Barb For Brewing (0.5 Micron)

Stainless Steel Diffusion Stone, 0.5 Micron Aeration Stone, Carbonation Stone With 1/4″ Barb For Brewing (0.5 Micron)

More Info

From the product description, check product page for current description, price and availability:

  • 304 SS Material★ All of diffusion stone is food grade 304 Stainless Steel. It features practical,healthier,anti-corrosion
  •  Quickly Carbonating Beer/Soda Water ★ CO2 or O2 will be forced through the millions of tiny pores in the stone, which dissolves the gas into the liquid. Let your beer or soda water get a good mouthfeel
  • Easy To Sanitize ★ soaking this 0.5 micron diffusion stone in boiling water for 20 to 30 seconds. Don’t touch the actual carbonated portion of the stone with your hands
  •  Easy To Install Or Use★ Using 1/4″ ID tubing to connect to the hose barb on the stone.This carbonation stone can used with the air pumps,no more need shaking your bottle

 

Stainless Steel Diffusion Stone, 0.5 Micron Aeration Stone, Carbonation Stone With 1/4″ Barb For Brewing (0.5 Micron) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Oxygen Air Flow Meter 0.1-1.5LPM Gas Flowmeter [Assist with Wort Oxygenation]

JIAWANSHUN Oxygen Air Flow Meter 0.1-1.5LPM / Gas Flowmeter with Copper Connector For Oxygen Air Gas Conectrator

JIAWANSHUN Oxygen Air Flow Meter 0.1-1.5LPM / Gas Flowmeter with Copper Connector For Oxygen Air Gas Conectrator

More Info

From the product description, check product page for current description, price and availability:

  • Mainly used to detect oxygen flow, control the flow of oxygen, the gas flow can be detected
  • Product function: to measure oxygen and other gas single-phase non-pulsating flow
  • Flow range: 0.1-1.5 LPM

What are others saying?  Search this product’s Amazon reviews for “wort”

Most regulators that homebrewers use for oxygenating wort are simple setups – Example – via William’s Brewing.  They attach to disposable oxygen tanks (typically sourced from a local hardware store) and are little more than on and off valves.  No gauges, no pressure control (other than the degree to which you open and close the valve) and no flow control.

Time and rate give you an idea of how much oxygen you’re really adding to your wort.  Time is easy to track.  Rate, not so much, at least with typical homebrew O2 regulators.  If you want more or less oxygen for your next batch, it’s mostly a guessing game.

Enter an oxygen flow meter.  A flow meter, gives you an idea of flow rate

See this in action: Reader Photo: Oxygen Flow Meter [Assist with Wort Oxygenation]

JIAWANSHUN Oxygen Air Flow Meter 0.1-1.5LPM / Gas Flowmeter with Copper Connector For Oxygen Air Gas Conectrator


More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Oxygen Flow Meter [Assist with Wort Oxygenation]

Hilitand Gas Flowmeter, LZQ-2 Flowmeter 0-3LPM Flow Meter with Control Valve for Oxygen Air Gas

Hilitand Gas Flowmeter, LZQ-2 Flowmeter 0-3LPM Flow Meter with Control Valve for Oxygen Air Gas

More Info

From the product description, check product page for current description, price and availability:

  • INSTRUCTIONS:This gas meter is connected to hose to measure unidirectional gas flow
  • MADE OF HIGH QUALITY ACRYLIC:Oxygen air gas meter is made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure
  • IT IS SIMPLE TO USE:LZQ-2 flow meter with control valve is simple to use, and has 8mm barbs for convenient connection to hoses
  • MEASURABLE GAS:Flowmeter can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon
  • MAINLY USED FOR:Flow meter mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry

Note from HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Using a Flow Meter For Increased Repeatability

Most regulators that homebrewers use for oxygenating wort are simple setups – Example – via William’s Brewing.  They attach to disposable oxygen tanks (typically sourced from a local hardware store) and are little more than on and off valves.  No gauges, no pressure control (other than the degree to which you open and close the valve) and no flow control.

Time and rate give you an idea of how much oxygen you’re really adding to your wort.  Time is easy to track.  Rate, not so much, at least with typical homebrew O2 regulators.  If you want more or less oxygen for your next batch, it’s mostly a guessing game.

Enter a flow meter.  This particular model has a range of 0 to 5 LPM.  This model also appears to have an knob that allows you to adjust the flow rate.  Note: .6 MPa is about 87 PSI.

With both time and flow rate you can establish a more reliable baseline to work off of.  This information should also help you to get better repeatability between brews.

Note that these are typically used for medical applications.  I’m not sure what the barb size is.  You will need to figure out tubing and connections to a compatible regulator and aeration/oxygenation stone.

Hilitand Gas Flowmeter, LZQ-2 Flowmeter 0-3LPM Flow Meter with Control Valve for Oxygen Air Gas – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

williamsbrewing.com oxygenation

Porpoise Brewing Aeration System

Oxygenation System for Fermentation

Oxygenation System for Fermentation by Porpoise Brewing

More Info

From the product description, check product page for current description, price and availability:

  • NEVER SHAKE YOUR FERMENTATION VESSEL AGAIN! – Aerating your wort has traditionally been a strenuous process of shaking your fermentation vessel in order to manually increase oxygen content. Now, our pre-assembled oxygenation kit has made introducing dissolved oxygen into your wort easier than ever!
  • OXYGENATE YOUR WORT IN JUST MINUTES – Our high efficiency 2 micron infusion stone diffuses oxygen into your wort in no time!
  • KEEP YOUR YEAST HEALTHY – Reduce fermentation lag time and reduce the chances of introducing off flavors into your beer
  • NEVER BUY AN OXYGEN TANK AGAIN – Using air is limitless and free!
  • KEEP CONTAMINATES OUT – Other methods of oxygenation can run the risk of contamination. Our pumps use an inline sanitary air filter that will keep bacteria and other contaminates from entering into your fermentation vessel.

Oxygenation/aeration generally improves the strength and vigor of your fermentations and helps to decrease lag times.  Note: This setup does not include the pictured glass carboy.

Oxygenation System for Fermentation – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

.5 Micron Stainless Steel Diffusion Stone – for aeration & carbonation

Stainless Steel Diffusion Stone, 0.5 Micron Aeration Stone, Carbonation Stone With 1/4" Barb For Brewing (0.5 Micron)

Stainless Steel Diffusion Stone, 0.5 Micron Aeration Stone, Carbonation Stone With 1/4″ Barb For Brewing (0.5 Micron)

More Info

From the product description, check product page for current description, price and availability:

  • 304 SS Material★ All of diffusion stone is food grade 304 Stainless Steel. It features practical,healthier,anti-corrosion
  •  Quickly Carbonating Beer/Soda Water ★ CO2 or O2 will be forced through the millions of tiny pores in the stone, which dissolves the gas into the liquid. Let your beer or soda water get a good mouthfeel
  • Easy To Sanitize ★ soaking this 0.5 micron diffusion stone in boiling water for 20 to 30 seconds. Don’t touch the actual carbonated portion of the stone with your hands
  •  Easy To Install Or Use★ Using 1/4″ ID tubing to connect to the hose barb on the stone.This carbonation stone can used with the air pumps,no more need shaking your bottle

 

Stainless Steel Diffusion Stone, 0.5 Micron Aeration Stone, Carbonation Stone With 1/4″ Barb For Brewing (0.5 Micron) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Oxygen System w/Stainless Wand, Tubing and .5 Micron Stone – $44.99 via William’s Brewing Clearance

Oxgenation System from William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

Why aerate your wort? Yeast needs oxygen to reproduce and produce strong cell walls. If the cell walls are weak, the yeast will have a low tolerance for alcohol, and can die before fully fermenting out the wort. Particularly in worts with starting gravities in excess of 1.050, this can contribute to long lag times, slow ferments, and higher than normal finishing gravities. Like an air stone in a fish tank provides oxygen for fish to breathe, wort aeration provides needed oxygen for yeast respiration and growth.

The advantage of the Oxygen Aeration System is that the wort can be aerated to 60% of its oxygen holding capacity in just 20 seconds, something that takes our Air Aeration System 5 minutes to accomplish. This shorter aeration means less foaming of the wort before pitching, an important consideration in higher gravity beers. This system includes a .5 micron aeration wand, for thorough oxygen dispersion.

Includes 22″ Aeration Wand with a .5 micron stainless aeration stone, 4′ of tubing, and an Oxygen Regulator for standard hardware store oxygen welding tanks. Pictured red oxygen bottle is not included, these disposable 1.4 and 2.1 ounce left hand thread bottles can be purchased at any hardware store in the welding or brazing section. One bottle will aerate 20 to 30 batches. Pictured glass carboy is not included.

Why buy a William’s Oxygen Aeration System? It has a 22″ U.S. made stainless wand, longer than any other system, so you can easily reach the bottom of a 5 or 6 gallon fermenter without dipping the plastic tubing into the wort.

Unlike other Oxygen Aeration Systems, which feature imported regulators and wands, all parts are made in U.S.A.

 

Includes oxygen regulator (made in the US) for use with disposable oxygen bottles (not included, typically found at local hardware stores), tubing, stainless steel wand and .5 micron aeration stone.

William’s Oxygen Aeration System

Check sale or product page for current availability & pricing

More Fermentation Related!

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Visit William’s Brewing – Web Only Clearance Sale

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsoxysys

Ferroday 0.5 Micron Stainless Diffusion Stone & Silicone Tubing

Ferroday 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4" Barb & 20" Silicon Hose for Homebrew Wine Beer Soda (Stone0.5)

FERRODAY 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4″ Barb for Homebrew Wine Beer Soda Air Stone 0.5 Micron + 20 Inch Silicone Hose

More Info

From the product description, check product page for current description, price and availability:

  • [ Healthy Food Grade Material]: The Whole 0.5 micron diffusion stone is made of 304 Stainless Steel, which let our 0.5 micron aeration stone anti-corrosion & high temperature resistant & Durable. 20 inch gas line is made of food grade Silicone.
  • [ Unique Carbonated Flavour]: 0.5 micron diffusion stone produces smaller & finer bubbles which can make the gas combines with liquid faster. Make draft beer, home brew soda and other drinks more delicate, more exquisite and more fresh.
  • [ Various Use]: 0.5 Microns aeration stone is best for oxygenation & carbonation. Use this air stone to oxygenate wort and carbonate beer/ soda prior to fermentation. Works great for other drinks as well
  • [ Connect With Fittings]: Attaching the aeration stone barb to a 1/4″ ID hose, and the other side of the hose can be attached with the “gas in” post on a keg and then connect the keg with CO2 regulator.
  • [ Boiled Clean]: The 0.5 micron diffusion stone needs to be boiled in water to get clean & unclog the pores. Sometimes if the aeration stone get blocked, can be dipped in acid for 15 seconds and then rinse with water.

 

Possible homebrewing uses include – carbonating, oxygenating and aerating.

FERRODAY 0.5 Micron Diffusion Stone Stainless Steel Aeration Stone Carbonating Stone with 1/4″ Barb for Homebrew Wine Beer Soda Air Stone 0.5 Micron + 20 Inch Silicone Hose – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

williamsbrewing.com oxygenation

Oxygen Flow Meter [Assist with Wort Oxygenation]

CNBTR LZQ-3 Acylic Flowmeter Gas Acrylic Metal Fitting Oxygen Flow Meter 0-5 LPM

CNBTR LZQ-3 Acylic Flowmeter Gas Acrylic Metal Fitting Oxygen Flow Meter 0-5 LPM

More Info

From the product description, check product page for current description, price and availability:

  • Center distance: 65.5mm. Connection method: 8MM/0.31Inch (Hose Connection)
  • Easy to use:It is simple to use, and has 8mm barbs for convenient connection to hoses
  • Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry. Flowmeter Interface is connected by Thread Interface.
  • Product function: to measure gas single-phase non-pulsating flow

 

Using a Flow Meter For Increased Repeatability

Most regulators that homebrewers use for oxygenating wort are simple setups – Example – via William’s Brewing.  They attach to disposable oxygen tanks (typically sourced from a local hardware store) and are little more than on and off valves.  No gauges, no pressure control (other than the degree to which you open and close the valve) and no flow control.

Time and rate give you an idea of how much oxygen you’re really adding to your wort.  Time is easy to track.  Rate, not so much, at least with typical homebrew O2 regulators.  If you want more or less oxygen for your next batch, it’s mostly a guessing game.

Enter a flow meter.  This particular model has a range of 0 to 5 LPM.  This model also appears to have an knob that allows you to adjust the flow rate.  Note: .6 MPa is about 87 PSI.

With both time and flow rate you can establish a more reliable baseline to work off of.  This information should also help you to get better repeatability between brews.

Note that these are typically used for medical applications.  I’m not sure what the barb size is.  You will need to figure out tubing and connections to a compatible regulator and aeration/oxygenation stone.

CNBTR LZQ-3 Acylic Flowmeter Gas Acrylic Metal Fitting Oxygen Flow Meter 0-5 LPM – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

williamsbrewing.com oxygenation

.5 Micron Stainless Steel Diffusion Stone – for aeration & carbonation

Stainless Steel Diffusion Stone, 0.5 Micron Aeration Stone, Carbonation Stone With 1/4" Barb For Brewing (0.5 Micron)

Stainless Steel Diffusion Stone, 0.5 Micron Aeration Stone, Carbonation Stone With 1/4″ Barb For Brewing (0.5 Micron)

More Info

From the product description, check product page for current description, price and availability:

  • 304 SS Material★ All of diffusion stone is food grade 304 Stainless Steel. It features practical,healthier,anti-corrosion
  •  Quickly Carbonating Beer/Soda Water ★ CO2 or O2 will be forced through the millions of tiny pores in the stone, which dissolves the gas into the liquid. Let your beer or soda water get a good mouthfeel
  • Easy To Sanitize ★ soaking this 0.5 micron diffusion stone in boiling water for 20 to 30 seconds. Don’t touch the actual carbonated portion of the stone with your hands
  •  Easy To Install Or Use★ Using 1/4″ ID tubing to connect to the hose barb on the stone.This carbonation stone can used with the air pumps,no more need shaking your bottle

 

Stainless Steel Diffusion Stone, 0.5 Micron Aeration Stone, Carbonation Stone With 1/4″ Barb For Brewing (0.5 Micron) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Threaded Stainless Steel Diffusion Stone

Stainless Steel Beer Carbonation Aeration Diffusion Stone Homebrew by Happybrew

Stainless Steel Beer Carbonation Aeration Diffusion Stone Homebrew by Happybrew

Possible homebrewing uses include – carbonating, oxygenating and aerating.

Stainless Steel Beer Carbonation Aeration Diffusion Stone Homebrew by Happybrew – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


More Fermentation Related!

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

williamsbrewing.com oxygenation