Cannular Pro Semi-Auto Bench Top Can Seamer via MoreBeerMore Info
From the product description, check product page for current description, price and availability:
The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple.
Whether you’re a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you’ll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.
Cannular Pro vs. Manual Unit
This new Semi-Auto Pro model will guarantee you get a consistent seaming process every time. Unlike the less expensive manual can seamer, this machine has no lever for the seaming operation, meaning it’s even easier for the operator to seam the can consistently and will not vary on how hard the operator is pulling the lever.
Another major difference is that the Cannular’s Pro table spacer is specially designed to work with both 500ml (16.9 oz) and 330ml (11.2 oz) Can Fresh Aluminum Cans right out of the box. Unlike the manual model that requires a secondary table spacer for use with 330ml cans, the Pro model features an adjustable platform, allowing you to raise or lower the table spacer depending on what size can you’re seaming. We have tested standard 202 cans and have been able to achieve good seals with proper adjustments. It is necessary to adjust the table height to ensure you have the appropriate amount of pressure applied when the can lift is raised.
The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:
- Place lid atop the can and place the can on the table spacer
- Turn the platform lever clockwise to raise the can to the seamer
- Press the seaming operation button then wait for the can to stop spinning
- Turn the platform lever counterclockwise to lower the can
- That’s all there is to it!
The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there’s no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.
As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. When purchasing the unit, you have the option of pairing it with either a power supply with 110V plug (CAN101), or with a 6 ft. long cord with Anderson plug and alligator clips (CAN102). The power supply is straight forward, and allows you to plug the unit into a standard 110V power socket. The alligator clips give you the option to power the unit from a battery, and can even be used with an 18V cordless power drill battery. This is certainly the most affordable option for powering the Cannular, and we’ve found that upwards of 200 cans can be seamed on a single battery charge.
So why can when you can bottle? There’s no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren’t just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they’re also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There’s still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it’s important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the “sciency stuff”, cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won’t ruin your day!
Power: 250W 24V DC
Rated Speed: 3300 RPM
Gearbox Ratio: 9.8 : 1
Dimensions: 16″ L x 9.5″ W x 21″ H
Weight: 40 lbs
Splash guard not included
Please note the pictured splash guard is not included with the seamer. Please see CAN106 to add the splash guard to your order.
Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular’s test show that a .4mm (.015″) actual overlap is all that is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment.
The Cannular Pro can be adapted for use with 32 oz Crowlers (Ball 300 can/end). To seam Ball 300 end/lid type oversized aluminium cans you will need to purchase the required Chuck for 1L (32 oz) Crowlers separately (coming soon).
This is a rare deal because the regular version of the Cannular is under a MAP agreement. That means that it, generally speaking, cannot be discounted. I don’t know if this is a one-off thing or if the reverse roller version will be an ongoing offering.
This refurbished unit is on sale for $649. That’s a $50 savings
- As of this posting this is a pre-order. Order now to reserve yours.
- Also Consider: Cannular Bench Top Can Seamer CAN100
- Hands on Review: Kegland Cannular Bench Top Can Seamer – Homebrew Canner
Another $20 Off!
As of this posting, MoreBeer is discounting orders of $20 ore more by… $20. Coupon is not stackable with other coupons. Limit 1 use per customer. MAP items are excluded.
Practically speaking, you’ll probably want to place an order (after discount) of $59 or more to qualify for free shipping.
$20 off $20 at MoreBeer! – use coupon code LETSBREW
Have you used your LETSBREW coupon?… Maybe your significant other would like to buy this for you?
This works with Cannular Pro, making it just $624.99. That’s a total savings of $75
Standard Product Page: Cannular Pro Semi-Auto Bench Top Can Seamer
Price, promotions and availability can change quickly. Check the product page for current price, description and availability.