William’s Brewing Deals! – Save at williamsbrewing.com!
Core 360 Regulator Deal!
KegLand Core 360 Mini C02 Regulator from William’s Brewing
More InfoFrom the product description, check product page for current description, price and availability:
The Mini 360 Core Actuator Regulator from KegLand is extremely versatile, and can be used with either a Sodastream® C02 Bottle or a 16 gram C02 cartridge.
Unlike other regulator designs, the Mini 360 Core does not puncture or open the C02 cartridge or cylinder until after the C02 source is screwed onto the regulator. After securing the C02 source to the regulator, you then tighten the plunger which pierces the cartridge, or opens the Sodastream pin. The result is no wasted gas when you install a cartridge.
It also has a choice of two disconnect orientations, and features a DuoTight compatible 6.5mm hose barb outlet which can also accept ¼” inner diameter gas tubing. Also included is a Female Flare outlet so you can screw this regulator directly onto a threaded Ball Lock Disconnect if you prefer.
The pressure relief valve releases at 65 PSI, but you can switch this out for a different range by using our red 35 PSI relief valve or our 100 PSI grey relief valve.
The Mini Gauge is heavily protected with brass on all sides to prevent damage when dropping. The gauge itself is a standard KegLand Mini Gauge, and you can swap out another KegLand Mini gauge with a 2mm hex wrench if you would prefer a different range than 0-60 PSI.
Includes:
1 x Mini 360 Core Actuator Regulator with Sodastream® thread
1 x 360° 6.5mm duotight compatible hose barb
1 x 360° FFL Fitting for MFL Disconnects
1 x Port end cap
1 x 65psi Green PRV
1 x 16 Gram Threaded C02 Cartridge Adapter
Note: This also fits Leland® brand 74 gram threaded cartridges if you order our adapter item G60. It does not fit 74 gram Brewer’s Edge® C02 cartridges.
Note: Pictured Sodastream® 60 Liter C02 Bottle not included, these are available at many home stores and also exchanged at many stores.
This is… DuoTight compatible and it works with Sodastream tanks and 16 gram cartridges! It’s worth noting that DuoTights are not a requirement if you’re not currently using that great system.
- For a limited time this is on sale for $54.99. That’s whopping $25 off list.
- Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.
KegLand Core 360 Mini C02 Regulator
FermZilla All Rounder Deal
- William’s Brewing has this on sale for $62.99.
- Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.
Fermzilla 30 Liter All Rounder Fermenter
FermZilla Reviews!
- Hands on Review: FermZilla All Rounder Fermenter
- Hands on Review: Fermzilla Conical Fermenter
- Hands on Review: Kegland Hop Bong
FermZilla Conical Deal
FermZilla Gen 3.2 27 Liter Tri Conical Fermenter via William’s Brewing
More InfoFrom the product description, check product page for current description, price and availability:
The Gen 3.2 FermZilla Tri Conical features a 3” Tri-Clamp fitting to attach the dump valve, and a 2” Tri-Clamp fitting to attach the improved 3.2 yeast collection vessel. This makes it easy to disassemble the fermenter for cleaning, and to remove and reattach the yeast collection vessel.
The FermZilla can be used in many ways -use it as a basic gravity fermenter with the ability to dump and harvest yeast, or as a pressure fermenter and or keg with optional Spunding Valve part C71 and Pressure Kit part C77, as a chilled fermenter with an optional Temp Twister and Cooling Kit, and even as a Hop Bong Pressure Kit, with the ability to add dry hops without adding oxygen.
Includes a lid with 35 PSI PRV valve, stainless stand, airlock, 600 ml collection container with 3″ Tri Clamp lid, and Tri Clamp fittings to assemble and use the fermenter. Overall height with airlock is 34″, with a width of 14″.
- William’s Brewing has this on sale for just $124.99
- Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.
FermZilla Gen 3.2 27 Liter Tri Conical Fermenter
FermZilla Reviews!
- Hands on Review: FermZilla All Rounder Fermenter
- Hands on Review: Fermzilla Conical Fermenter
- Hands on Review: Kegland Hop Bong
Reader Tip… Weyermann Barke Pilsner Malt Deal at William’s Brewing
Thanks to HBF Reader David for this tip! Let’s be friends! 8 Ways to Connect with HBF
- William’s Brewing has Weyermann Barke Pilsner Malt on Sale
- 10 lb bags are $18.99 each (no limit) and qualify for free or flat rate shipping to addresses in the contiguous US.
- 55 lb sacks are on sale for $54.99 + actual shipping charges
Weyermann Barke PIlsner Malt Deal!
Sankey Keg Party Pump Kit – on sale for.. $23.49
Party Pump Kit from William’s Brewing
From the product description, check product page for current description, price and availability:
Do you want to keep it simple and just get a commercial keg of beer and dispense? This kit converts any Sankey coupler to an air pump beer dispenser. Keep in mind if you pump a keg with air, the beer will oxidize if left for more than a couple days, so this tap should be used for parties only.
Does not include needed Sankey Coupler, virtually any brand Sankey coupler will work.
- As of this posting, William’s Brewing has this on sale for just $23.49.
- Shipping is free or reasonably priced flat rate to addresses in the lower 48 states depending on your order size for most items.
Because of the real potential for oxygenation I wouldn’t recommend this for a long term (or even mid term solution). To me, these make sense when you’re confident your get-together will go through an entire keg.
44% Off Stainless Steel False Bottom Upgrade for Grainfather
Grainfather False Bottom
More Info From the product description, check product page for current description, price and availability: This type 304 stainless false bottom has been designed to perfectly fit the G30 Grainfather. Includes pictured lifting ring. 11 5/8″ overall diameter (290mm), and the 3 legs are 1 1/2″ high, or 35mm Also: The Grainfather with Connect Controller C02 Tank Leak Stopper from William’s Brewing From the product description, check product page for current description, price and availability: This brass fitting will convert your C02 tank valve into a valve with a permanent sealing O ring. No more need to buy fiber or plastic tank sealing washers. Installs in any CGA-320 C02 valve that has female threads in the center of the outlet. Use a 5/32″ hex key to screw this in. Important: Before ordering, check to see if the C02 valve’s outlet hole on your cylinder has female threads. If it does this will work, if the hole is smooth without threads, this will not fit. From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions. William’s Brewing has announced the availability of Kegland Dry Malt Extract. William’s Brewing has tested these extracts and says that are as good or better than any on the market. Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items. Also: William’s Brewing Malt Extracts For a limited time, William’s Brewing has 70 L Belgian Carra Terra on sale for just $1.39 per lb Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items. 70 L. Belgian Cara Terra Crushed Nukatap Counter Pressure Bottle Filler From the product description, check product page for current description, price and availability: Do you having a kegging system with beer faucet, and want to bottle kegged beer? The Nukatap Counter Pressure Bottle Filler is an easy way to fill bottles directly from your beer faucet while preserving carbonation in the bottle. The O ring sealed beer inlet nipple press fits into any beer faucet with 10.0 mm inner diameter spout/nozzle including Nukatap, Intertap, Perlick Forward Seal, and Ventmatic faucets. For the gas inlet side, a male ball lock fitting is provided, so you can use any ball lock gas connector to attach the C02 purging gas. This gas should be at the same pressure as your kegerator dispensing gas, and should be connected to your kegerator C02 regulator. Not Included: you will need a spare gas line from your regulator kegging system with a female ball lock on it to connect your purging C02 gas. The integrated counter pressure relief valve gives you control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. Keep everything cold for the best results. Fits all 16 ounce and 32 ounce ‘Grolsch’ style swing top bottles. This connects directly to your compatible forward sealing faucet (Intertap, Nukatap and more) and allows you to easily counter fill bottles directly from the tap. This is DuoTight compatible, although you don’t need to use DuoTights throughout your entire tap system to use it. Nukatap’s Counter Pressure Bottle Filler Learn More… Hands on Review Nukatap Counter Pressure Bottle Filler! Compare: Nukatap Counter Pressure Bottle Filler via MoreBeer, $79.99 as of this posting William’s Brewing has a number of yeast deals going on. Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items. Krome Beer Faucet Adapter From the product description, check product page for current description, price and availability: Allows beer faucets to be attached to a 1/4″ male male flare keg connection fitting. In addition to this fitting, you will need a threaded beer ball lock fitting (like KegLand item B12), a suitable beer faucet (like Nukatap item X85). and a faucet securing nut (Q53). Note: This does not work with flow control faucets. Made by Krome Dispense. This allows you to connect a faucet directly to your ball lock or pin lock keg via a threaded MFL QD (not included) Krome Brand Beer Faucet Adapter William’s Says… “We have a few dry yeasts in inventory that are past their best by date, but are still viable. These range from a best by date of 11/22 to 2/23, and have been stored refrigerated since we received them. While limited supplies last.” William’s Brewing has announced the availability of winter seasonal strains. Check out the Seasonal Strain’s page for a list of current offerings. Seasonal Wyeast Labs Strains at William’s Brewing DuoTights: Add Flow Control: Related: What Does a Flow Control Faucet Do? – Step by Step Balancing Your Kegerator Draft System DuoTight Users – Add DT QD’s: Hands on Review: Kegland DuoTight Ball Lock QDs Upgrade to Nukataps: Add Per-Line Pressure Control: Upgrade Inline Regulators and Spunding Valves to Digital: William’s Brewing has an ongoing Web Only Clearance. That features discounts on a regularly changing selection of gear and supplies. Molded Carbonation & Cleaning Cap via William’s Brewing From the product description, check product page for current description, price and availability: This molded male ball lock valve coupling cap that fits a 2 liter or smaller plastic soda bottle with a 28mm screw cap lid. This allows the 2 liter bottle to be charged with C02 from any female ball lock gas fitting (like our item D32 or D03 Gas Connector), carbonating the cold beverage in the bottle. Great for serving draft beer away from the keg. Also fits the Brewzilla in and out ports on the lid, and the Brewzilla Collection Jar ports for pressurizing the Brewzilla fermenter. The hose barb on the bottom is also compatible with our DuoTight fitting Z84 and C55 which lets you easily attach a ball lock fitting to an EvaBarrier 8mm or 9mm outer diameter line. This has a hybrid ball lock post that will accept beer and gas lines. IMPORTANT SAFETY WARNING: FOR USE ON PLASTIC SODA BOTTLES AND BREWZILLA ONLY, NEVER USE ON GLASS BOTTLES What are these used for? Related Reviews: Hands on Review: Kegland 2.5 Liter Growlers | Hands on Review: Kegland Ball Lock Cleaning Kit &… Party Pump | You can use these with DuoTight Fittings if you’d like. DuoTights are awesome! Hands on Review A great deal! Molded Carbonation & Cleaning Cap Carbonation Cap Tee Adapter via William’s Brewing From the product description, check product page for current description, price and availability: Make a ball lock keg out out of PET plastic bottles. Great for taking beer to a party or making your own mini keg system with a 2 liter soda bottle. This tee piece enables you to attach both a liquid and gas ball lock disconnect to the bottle at the same time so you can essencially use a common PET bottle as a keg. Very handy with a two liter soda bottle, as you can get a short length of ¼” interior diameter silicone tubing, attach it to the top Carbonation Cap (not included), fill with beer, and put in the refrigerator, either upright or sideways. Or if you have Nukatap or Intertap faucets on your draft system, make a draft system cleaner – fill a soda bottle with beer line cleaner, attach an optional ball lock adapter to the end of your Intertap/Nukatap Faucet, and open the faucet to force cleanser into your draft beer system and down the lines. Note: This is for the tee piece only. You need a soda bottle with standard PCO 1881 thread, 2 item C35 Carbonation Caps, and some ¼” interior diameter tubing to complete your soda bottle keg conversion. This tee in conjunction with compatible carbonation caps can convert PET bottles into mini kegs or for use flushing or cleaning draft lines. Related Reviews: Hands on Review: Kegland 2.5 Liter Growlers | Hands on Review: Kegland Ball Lock Cleaning Kit &… Party Pump A great deal! Look to the right of the Web Only Clearance section. There is a Product Specials section that shows sale items. Items we’ve seen discounted when you buy a certain quantity. Discounts, thresholds and availability can change. William’s parodically offers a free item with certain size orders. We have a page to track these… This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds! Visit William’s Brewing – Web Only Clearance Sale Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsmultiple tag:@ tag:itsapagewms
Announcing: CO2 Tank Leak Stopper
Announcing: Kegland Dry Malt Extract!
Malt Deal…
Limited Time Deal on 70 L. Belgian Cara Terra:
Nukatap Counter Pressure Bottle Filler… $59.99, Compare at $79.99
Save on 10 lb Sacks of Malt
Yeast Sale:
Krome Brand Beer Faucet Adapter
Expired Yeast Sale:
More at William’s Brewing!
Seasonal Wyeast Strains
Kegerator Upgrades to Consider:
Web Only Clearance:
DuoTight Compatible Plastic Carbonation & Line Cleaning Ball Lock Caps… $4.99
Carbonation Cap Tee Adapter… $2.99
Product Specials:
Quantity Discounts:
Freebies:
Our William’s Freebie Page
Get Free Shipping at William’s Brewing:
Shipping is free or reasonably priced flat rate to addresses in the lower 48 states depending on your order size for most items.