CHUGGER PUMP CPSS-CI-1 Stainless Steel 115 Volt Center Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 3/4” x Outlet 1/2” MPT, ETL-Certified, USFDA Food Compliant Materials
From the product description, check product page for current description, price and availability:
- ETL-Certified; USFDA Food Compliant Materials; UL Recognized; Sturdy 115-Volt (50/60HZ) Booster Pump With 55″ Electric Cord WITH PLUG; Non-Submersible; Comparable to March 815-SS and March 809 Beer Pumps
- Transfers Flow of Hot and Cold Liquids Between Brewing Vessels or Kettles; Cools Wort Via a Counter-Flow Chiller; Recirculates Ice Water for Quicker Chilling; Circulator Pump with 316 Stainless Steel Front and Rear Housing; Made by Brewers for Brewers
- Light Enough to Be Portable; High-Quality Stainless Steel Pump Head Eliminates Stripped Threads; Magnetic Drive with Base, Teflon Thrust Washer, Clear Silicone O-ring, and Ryton/Teflon Impeller
- Max Flow Rate of 7 GPM 26.5 LPM; 18.6-feet 4.1M of Max Head to Handle Back-Pressure; Device is Capable of Handling Liquids of Different Temperatures Up to 250 Degrees F
- Inlet 3/4″ MPT and Outlet 1/2″ MPT Allows Configuration for Any Application; 1/20 HP (.04 HP) .029 KW; Motor Only: 1.7 Amps; Motor and Pump: 1.9 Amps; Motor Amp Rating: Full-Load Amps (FLA); This is NOT a Self-Priming Pump, DO NOT RUN DRY
I use my homebrew pump for vorlaufing/recirculating, transferring from my mash tun to brew kettle, chilling with a recirculating wort chiller and transferring to my fermenter. You could also use a brewing pump to recirculate ice water for your wort chiller. Pumps are a necessity if you want to use a plate chiller. You really need one to properly clean and sanitize your plate chiller.
7/12/18 2 AM Central: This is on sale for $129.99. Shipping to most US addresses also is free. Note: You must choose seller Wholesale Pumps on the All Offers Page to get this price. Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit Amazon. Check the product page for current price, description and availability.
1/2″ fittings seem to be pretty standard for homebrewers. This pump has a 1/2″ outlet, but a 3/4″ inlet. If you’ve standardized on 1/2″ you may need a reducer.
- Brass Adapter 3/4″ Female x 1/2″ male – via Amazon, See Reader Photo
- Stainless Steel Reducing Coupler for Chugger Center Pumps – stainless option, via Amazon
More: Recent Amazon Finds