Stainless Steel 3/4″ to 1/2″ Reducer for Center Inlet Chugger Pumps
Stainless Steel Reducing Coupler for Chugger Center Pumps
More InfoHighlighted Features
- 3/4" FPT tp 1/2" MPT
- Hex nut for easy secure fit
- 304 stainless steel
- Fits Chugger center pumps
- Reduces size from 3/4" to 1/2 standard
1/2″ fittings seem to be pretty standard for homebrewers. Center inlet Chugger Pumps are a little different compared to most high temp homebrew pumps with regards to fittings. Most homebrew pumps are 1/2″ NPT threads on both the “in” side and the “out” side. The center inlet pump is 1/2″ NPT on the “out” side and 3/4″ NPT on the inlet side. Some people want this to be 1/2″ also, so a fitting is required.
This fitting is nice because it is female to male. A lot of ball valves are female, so this would allow you put a female threaded ball valve on without the aid of another fitting.
HomeBrewStuff Stainless Steel Reducing Coupler for Chugger Center Pumps – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
Center Inlet Chugger Pump:
- X-Dry Series Chugger Pump (Center Inlet) – Stainless Steel 1/2 in threads at MoreBeer
- XCPSS-IN-1 Stainless Steel pump – via eBay
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!
pinned amazonMake sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:lnksfxd rp:chuggerreducer:rp