March 815-SS Homebrew Pump – $174.99 + Free $20 Gift Card

March 815-SS Pump

March 815-SS Pump via Austin Homebrew Supply

More Info

From the product description, check product page for current description, price and availability:

The March 815 PL pump is very similar to the 809 HS. The 815 has a higher flow (7 gallons / min vs 6 gallons / min) and can pump higher in the air (18.6 ft vs 12.1 ft). This 815 pump features a stainless steel pump head.

The March 815 PL pump is constructed of food grade material that will not create off flavors. It will handle wort at boiling temperature, and take back pressure (flow restriction). This pump can be used for an all-grain system, or used to pump wort through a counterflow or brazed plate heat exchanger.

Features and specifications:
– 1/2″ NPT connections for both inlet and outlet
– 6 ft cord and plug
– 115V
– 1/25 horsepower, continuous duty 1.4 Amp motor
– Flow rate: 7 gallons / min
– Max head: 18.6 feet
– Withstands liquids up to 250 F (121 C)
– Food Grade
– The head is made from stainless steel

The March 815 uses a magnetic-drive pump, so there is no chance of oil contaminating beer. Do not allow magnetic-drive pumps to run dry, because these pumps are not self-priming. That means the pump will need to be mounted below the level of the liquid to be pumped. They will not work with a siphon. This will cause the pumps to run dry, which will destroy the units and void the warranty. If the flow needs to be reduced, a valve on the output side can be used to restrict the flow. Do not restrict the flow into the motor.

Always use a GFCI (Ground Fault Circuit Interrupter) when using a pump to reduce the chances of electrocution. If you do not have a GFCI outlet, use the drop down menu below to add a GFCI outlet adapter.

The March Pump also requires two 1/2″ NPT couplings. One is for the in connection, and one is for the out connection. See the options below.


I use my brewing pump for vorlaufing/recirculating, transferring from my mash tun to brew kettle, chilling with a recirculating wort chiller and transferring to my fermenter.

As of this posting, Austin Homebrew Supply has this on sale for $174.99. Price, promotions and availability can change quickly.  Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page.  Check the product page for current price, description and availability

Free $20 Gift Card! As of this posting, Austin Homebrew Supply is giving away a free $20 gift card with all purchases of $100 or more.  I believe that the only exclusion is… gift cards.  This equates to a back door discount on lots of product lines that typically are not discounted.  It also stacks with items that are already on sale.  No coupon code is necessary.  The promotional gift card will be automatically added to your cart when you place $100 of qualifying merchandise in your cart.

March 815-SS Pump

Check sale or product page for current availability & pricing

Compare: March High Temperature Brewing Pump – SS High Flow – similar but may not be identical

Leave a Reply