Chugger Homebrew Pump Stainless Steel with Center Inlet

CHUGGER PUMP CPSS-CI-1 Stainless Steel 115 Volt Center Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 3/4” x Outlet 1/2” MPT, ETL-Certified, USFDA Food Compliant Materials

CHUGGER PUMP CPSS-CI-1 Stainless Steel 115 Volt Center Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 3/4” x Outlet 1/2” MPT, ETL-Certified, USFDA Food Compliant Materials


From the product description, check product page for current description, price and availability:

  • ETL-Certified; USFDA Food Compliant Materials; UL Recognized; Sturdy 115-Volt (50/60HZ) Booster Pump With 55″ Electric Cord WITH PLUG; Non-Submersible; Comparable to March 815-SS and March 809 Beer Pumps
  • Transfers Flow of Hot and Cold Liquids Between Brewing Vessels or Kettles; Cools Wort Via a Counter-Flow Chiller; Recirculates Ice Water for Quicker Chilling; Circulator Pump with 316 Stainless Steel Front and Rear Housing; Made by Brewers for Brewers
  • Light Enough to Be Portable; High-Quality Stainless Steel Pump Head Eliminates Stripped Threads; Magnetic Drive with Base, Teflon Thrust Washer, Clear Silicone O-ring, and Ryton/Teflon Impeller
  • Max Flow Rate of 7 GPM 26.5 LPM; 18.6-feet 4.1M of Max Head to Handle Back-Pressure; Device is Capable of Handling Liquids of Different Temperatures Up to 250 Degrees F
  • Inlet 3/4″ MPT and Outlet 1/2″ MPT Allows Configuration for Any Application; 1/20 HP (.04 HP) .029 KW; Motor Only: 1.7 Amps; Motor and Pump: 1.9 Amps; Motor Amp Rating: Full-Load Amps (FLA); This is NOT a Self-Priming Pump, DO NOT RUN DRY

I use my homebrew pump for vorlaufing/recirculating, transferring from my mash tun to brew kettle, chilling with a recirculating wort chiller and transferring to my fermenter.  You could also use a brewing pump to recirculate ice water for your wort chiller.  Pumps are a necessity if you want to use a plate chiller.  You really need one to properly clean and sanitize your plate chiller.

CHUGGER PUMP CPSS-CI-1 Stainless Steel 115 Volt Center Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 3/4” x Outlet 1/2” MPT, ETL-Certified, USFDA Food Compliant Materials


Reducer Fitting: 1/2″ fittings seem to be pretty standard for homebrewers.  This pump has a 1/2″ outlet, but a 3/4″ inlet.  If you’ve standardized on 1/2″ you may need a reducer.

Related: Homebrew Pump Discounts, Deals and Resources | All Grain Tips & Gear

More: Recent Amazon Finds


3 thoughts on “Chugger Homebrew Pump Stainless Steel with Center Inlet

  1. Anonymous

    Chugger Stainless Steel Brewing Pump Center Inlet (Comparable to March 809-SS-HS-C

    now

    $146.64 + $7.35 shipping
    In Stock. Sold by HomeBrewStuff

    Reply
  2. Anonymous

    I just bought one so it’s comes and goes. Amazon is weird that way. Anyway, get em while you can..

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *