Lyqily 400 GPH Utility Pump + Our Draft Line Cleaning Builds

Lyqily 400GPH Water Pump Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.6ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51"/0.63"/0.75")

Lyqily 400GPH Water Pump Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.6ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″)

More Info
Highlighted Features
  • 【ADJUSTABLE】Designed with a adjusting knob, allowing to adjust the water flow rate.
  • 【STEADY STAY】Rubber suction cups can be a good fit in the glass surface, to help keep it stability.
  • 【CLEANABLE】No need any tools to detach it, easy to separate, easy to clean.
  • 【ULTRA-QUIET】Energy-saving low power, keep reliability and low noise operation, giving you quiet environment.
  • 【WIDELY USED】This submersible pump is perfect for aquariums, fountains, ponds and hydroponic systems, etc.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Lyqily 400GPH Water Pump Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.6ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Our Line Cleaning Builds:

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Leave a Reply