Hands On Review: TRINITY EcoStorage NSF Stainless Steel Table

review TRINITY EcoStorage NSF Stainless Steel Tabl

I picked up Trinity’s EcoStorage Stainless Table toward the end of 2014.  I wanted a sturdy, easy to clean table for around the brewery tasks and storage.  This table is all stainless construction, NSF certified, has 150 lb capacity per shelf, features adjustable feet levelers and the shelf is fully adjustable.  48″ wide, 35.5″ tall, 24″.

cln_img_9607NSF Certification sticker.  The stainless surface table top can be cleaned and sanitized.

cln_img_9610Trinity logo on the left side of the shelf

IMG_9603A look down the table.  This is between my tub sinks and a storage rack

review TRINITY EcoStorage NSF Stainless Steel TablA storage rack on the left and my Utilatwin sink on the right.  After adjustment, this ended up at a good height next to my sink.  A couple inches higher.  A good height to set things as they are cleaned.

cln_img_9630Works great with my Keg and Carboy Washer [Review].  It’s nice have an easily cleanable surface and having this right by my sink makes it easy to fill and empty things like the Carboy Washer.

I originally heard about this table from HBF Reader [8 Ways to Connect with HBF] Jeff.  Jeff purchased it himself and shared some pictures and feedback  Thank you Jeff!

TRINITY EcoStorage NSF Stainless Steel Table, 48-InchReader Photo:  A picture of the table with a keggle on top for size reference.  Click the photo to enlargeTRINITY EcoStorage NSF Stainless Steel Table, 48-InchReader Photo: Underside of the bottom of the table.TRINITY EcoStorage NSF Stainless Steel Table, 48-InchReader Photo: Bottle tree and bucket sitting on top.

from Jeff: “I’ve been looking for some stainless steel tables for months now, but I was very leery about cheap non-sturdy tables. After receiving my Trinity work table today there is no question in my mind that it is 110% restaurant quality stainless worktable. I couldn’t ask for a more sturdy table. I could easily stand on this table (at 200lbs) and feel secure, however the instructions say not to. To my surprise, as I was putting the table together (super simple) I flipped table over I noticed fantastic reinforcements on the bottom. I’ve attached a picture of both!”

Follow up from Jeff: “I’ve used my table consistently since purchase, multiple times a week for brewing, bottling, cleaning, food table for parties, etc. Six months later, there is no question in my mind that this table was worth every cent!”

from Stephen: “I have the 24″ model that I have turned into a grain milling station and have to agree these tables are AWESOME!”

img_purchdate

This is a well built heavy duty table.  The all stainless build also looks great.  I’m glad to have it for storage, as a general work area for brewing tasks and more.  This is a great table!

Although mine isn’t in my brewing area, this would also make a good brew day work table too.

TRINITY EcoStorage NSF Stainless Steel Table, 48-Inch

Also available in a smaller 24″ size…
TRINITY EcoStorage NSF Stainless Steel Table, 24-Inch

Also: Best Sellers in Commercial Worktables and Workstations Category

4 thoughts on “Hands On Review: TRINITY EcoStorage NSF Stainless Steel Table

  1. Bootlegcraig

    The site says 150lb max capacity. I feel like that’s not enough for a brew table… Am I wrong? I feel like water, kegs, grain, ect would weigh much more than that.

    Reply
    1. Chris

      I’m also curious about that as use for a brew table. Did you receive a response or any clarity if it’s a good brew table?

      Reply
  2. Stephen

    I have the 24″ model that I have turned into a grain milling station and have to agree these tables are AWESOME! If you have a Costco membership the 24″ is cheaper there and will ship free.

    Reply
  3. Jeff

    I’ve used my table consistently since purchase, multiple times a week for brewing, bottling, cleaning, food table for parties, etc. Six months later, there is no question in my mind that this table was worth every cent!

    Reply

Leave a Reply