Category Archives: Wort Chillers

660 GPH Utility Pump by FREESEA + Draft Line Cleaning Builds

FREESEA 160-1100 GPH Submersible Water Pump for Pond Aquariums Hydroponics Fish Tank Garden Fountain Waterfall

FREESEA Submersible Water Pump

More Info
Highlighted Features
  • Intelligent Dry Heating Protection: The submersible water pump will stop from draining and pumping water, al long as the temperature reaches to 185 ℉(85℃), and the motor will restart working after the temperature goes down. This function can effectively reduce the damage caused by dry running.
  • Low Water Level Design: The powerful suction at the bottom can pump water as low as 0.2 inches, and with the 360 degree water suction design, it can solve the problems of cleaning, while keeping water circulating all around.
  • Product Dimensions: 5.1*3.75*4.72inches, this fountain water pump comes with 5.97ft power cord, and the max flow rate can be up to 660GPH, the max lift height can be up to 8.2FT.
  • Ultra Quiet Design: The aquarium fish tank pump comes with a duarable and corrosion-resistant ceremic motor which runs less than 20 decibels, offering a quiet environment. And it is easy to disassemble and clean.
  • 12-month Warranty: Equipped with pure copper wiring, the small pond pump has a longer service life and is more energy savings. There's a 12-month warranty and 24 hours professional after-sales service, if you have any questions about the water pump you got, please feel free to contact us.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA 660 GPH 40W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Kegland Wort Chiller Sale

kegland chillers

William’s Brewing Annual Father’s Day Sale is on. Valid for a limited time, while supplies last.

Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

William’s Brewing Father’s Day Sale

The sale includes a couple chiller options including the pictured modular immersion chiller and Kegland’s Modular Counterflow Wort Chiller

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Visit William’s Brewing – Web Only Clearance Sale

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

400 GPH Submersible Pump, Brushless Motor, Stainless Impeller Shaft + Recirculating Draft Line Cleaning Build

Winkeyes 400GPH Pump

Winkeyes 400GPH Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • USE BRUSHLESS MOTOR, run smoothly, low noise, long working life compared with brush motor, keep it quiet and not scare the fish.
  • ANTI DRY BURNING DESGIN, the fish pong pump can withstand 48 hours dry burning. So no need to worry about there is not enough water in your fish tank when you go on a short trip.
  • STRONG POWER HIGH LIFT, this fountain pump max lift height: 6.9ft. 25W high efficiency motor for energy saving. Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly)
  • STAINLESS STEEL PUMP IMPELLER SHAFT, corrosion resistance, strong driving, long working life, so JAKIELAX submersible pump also fit for sea water
  • SUCTION CUP 2 NOZZLES ADJUSTABLE FLOW RATE, 4 individual powerful suction cups that hold the pump securely on the right side of aquarium, vertically or horizontally. water change pump has 2 nozzles for optional

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Winkeyes 400GPH Water Pump with 48 Hours Anti Dry Burning, Ultra Quiet 25W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 6.9ft High Lift, 5.9ft Power Cord, 2 Nozzles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Cold Crank Small Batch Immersion Chiller – on sale for $43.97 + My Stove Top Small Batch Process

Cold Crank®: Small Immersion Chiller

Cold Crank Small Immersion Chiller

More Info

From the product description, check product page for current description, price and availability:

Ready to give your biggest brew day chore the cold shoulder? Chill your wort down in a flash with the NEW Cold Crank immersion chiller.

The Cold Crank immersion chiller is easier and way more effective than an ice bath. Efficient and way more affordable than big-ticket versions. We ditched all the frills and designed a no-nonsense chiller that’s compact, easy to use and incredibly durable because it’s crafted from the same quality materials as the big guys. Plus, it’s engineered for mobility, allowing you to stir your wort as you chill it for even faster results. So skip the ice bath and crank your brew game up a notch with Cold Crank® immersion chiller.

Minimal effort. Minimal expense. Maximum return.

Dimensions:

The Coil: 8.5″ Tall, 4.5″ Wide, 2″ Deep
Top to Bottom: 21.5″
13 Feet of Copper Tubing
Some Assembly Required. A flat head screwdriver or 1/4″ wrench is necessary.


 

  • AIH has a massive clearance sale going on.
  • This is included in the mix and on sale for $43.97.
  • No coupon code is required, but quantities may be limited. Check the product page to see if you can still get in on this.

Clearance Sale

Cold Crank®: Small Immersion Chiller

Also: Check out my step by step process for brewing small batch all grain on my stove top.  Includes a spreadsheet to help make water volume and temp calculations a breeze.

Small Batch, All Grain Stove Top Brewing + Water Calculation Spreadsheet

homebrewing.org sale

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

More: Recent AIH Finds

Price, promotions and availability can change quickly.  Check the product page for current price, description and availability.

VIVOSUN 400 GPH Utility Pump + Draft Line Cleaning Builds

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles

More Info
Highlighted Features
  • Specifications: Dimensions: 4.1'' x 2.52'' x 2.95''; The 5-ft. long power cord offers convenient installation; Max. Flow Rate: 400 GPH (1500L/H); Max. Lift Height: up to 5.3 ft.; Wattage: 15W; Voltage: 110-120V
  • Detachable & Cleanable: This compact water pump is easy to hide or disguise and no additional tools are needed for disassembly and cleaning
  • A Variety of Outlet Positions: Place the pump flat and choose whichever outlet position suits your needs
  • Wide Range of Applications: High performance energy-efficient pump designed for use in ponds, fountains, waterfalls, hydroponic systems, irrigation systems and other water features
  • Warranty: Super durable & reusable, this pump comes with a 2-Year warranty; If you have any problems with the item you receive, please contact us without hesitation

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Lyqily 740GPH Submersible Water Pump – Draft Line Cleaning, Potential Mark II Replacement & More

Lyqily 740GPH Submersible Water Pump Ultra Quiet 55W

More Info
Highlighted Features
  • 【ADJUSTABLE】Designed with a adjusting knob, allowing to adjust the water flow rate.
  • 【STEADY STAY】Rubber suction cups can be a good fit in the glass surface, to help keep it stability.
  • 【CLEANABLE】No need any tools to detach it, easy to separate, easy to clean.
  • 【ULTRA-QUIET】Energy-saving low power, keep reliability and low noise operation, giving you quiet environment.
  • 【WIDELY USED】This submersible pump is perfect for aquariums, fountains, ponds and hydroponic systems, etc.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential Uses:

Photo via Sourcing a Replacement Pump for Mark’s Keg and Carboy Washer

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″)  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related: Our Line Cleaning Builds:

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

VIVOSUN 400 GPH Utility Pump + Draft Line Cleaning Builds

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles

More Info
Highlighted Features
  • Specifications: Dimensions: 4.1'' x 2.52'' x 2.95''; The 5-ft. long power cord offers convenient installation; Max. Flow Rate: 400 GPH (1500L/H); Max. Lift Height: up to 5.3 ft.; Wattage: 15W; Voltage: 110-120V
  • Detachable & Cleanable: This compact water pump is easy to hide or disguise and no additional tools are needed for disassembly and cleaning
  • A Variety of Outlet Positions: Place the pump flat and choose whichever outlet position suits your needs
  • Wide Range of Applications: High performance energy-efficient pump designed for use in ponds, fountains, waterfalls, hydroponic systems, irrigation systems and other water features
  • Warranty: Super durable & reusable, this pump comes with a 2-Year warranty; If you have any problems with the item you receive, please contact us without hesitation

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Flash Sale… Cold Crank Small Immersion Chiller… $35!

Cold Crank®: Small Immersion Chiller

Cold Crank Small Immersion Chiller

More Info

From the product description, check product page for current description, price and availability:

Ready to give your biggest brew day chore the cold shoulder? Chill your wort down in a flash with the NEW Cold Crank immersion chiller.

The Cold Crank immersion chiller is easier and way more effective than an ice bath. Efficient and way more affordable than big-ticket versions. We ditched all the frills and designed a no-nonsense chiller that’s compact, easy to use and incredibly durable because it’s crafted from the same quality materials as the big guys. Plus, it’s engineered for mobility, allowing you to stir your wort as you chill it for even faster results. So skip the ice bath and crank your brew game up a notch with Cold Crank® immersion chiller.

Minimal effort. Minimal expense. Maximum return.

Dimensions:

The Coil: 8.5″ Tall, 4.5″ Wide, 2″ Deep
Top to Bottom: 21.5″
13 Feet of Copper Tubing
Some Assembly Required. A flat head screwdriver or 1/4″ wrench is necessary.


 

  • As part of a short flash sale, Austin Homebrew Supply has this marked down to just $35.
  • Austin has been doing very quick flash sales recently. They’ve lasted just hours. If you’re interested, my recommendation is to make your purchase sooner rather than later.
  • Quantities are also probably limited. No coupon code required, check product page to see if this is still available.

Cold Crank®: Small Immersion Chiller

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

VIVOSUN 850 GPH Utility Pump + Our Draft Line Cleaning Builds

VIVOSUN Submersible Pump

VIVOSUN Submersible Pump

More Info
Highlighted Features
  • Product Details: 5.9” x 4.3” x 6.1”; The 5ft. long power cord offers convenient installation wherever you need; Max. flow rate: 850 GPH (3500 L/H); Max. lift height: up to 9.2 Feet; Watt: 60W; Voltage: 110-120V/60Hz
  • Bottom Inlet: Our innovative bottom inlet design provides powerful suction, capable of pumping water as shallow as 0.5mm, ensuring thorough water circulation; The 360° omnidirectional filter effectively removes debris and impurities, maintaining continuous water flow all around; In case of any blockage in the water inlet, simply clean it with fresh water before use
  • Anti-Drying Design: When the temperature reaches to 185 ℉(85℃), the built-in thermal protector chip will stop the pump from draining and pumping water; Pure copper wiring delivers more stable power for a longer service life and more energy savings
  • Ultra-Quiet & Durable: Only making 28db sound, this pump is super quiet, so there is no trouble of getting disturbed while the pump is working; The pump’s ceramic shaft core uses a high-strength wear-resistant rotor that is both acid resistant and corrosion resistant
  • Wild Application: Equipped with detachable water outlet, suitable for various sizes of water pipes, this submersible pump can be applied to many different occasions, such as fish tank, pond, aquarium, hydroponic systems and etc

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

VIVOSUN 850GPH 60W Submersible Pump for Fish Tank, Pond, Aquarium, Hydroponic Systems with 5ft Power Cord and 4 Nozzles – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

400 GPH Utility Pump + Draft Line Cleaning Builds

Fountain Pump, 400GPH Submersible Water Pump, Durable 25W Outdoor Fountain Water Pump with 6.5ft Power Cord, 3 Nozzles for Aquarium, Pond, Fish Tank, Water Pump Hydroponics, Backyard Fountain

Submersible Utility Pump

More Info
Highlighted Features
  • ★【PROVIDE YOU COMFORT & QUIET ENVIROMENT】Our fountain pump’s ultra-quiet operation will let you feel that the sounds of the water pouring out of your fountain is such a relaxing and tranquil sound, and you will love sitting out on your patio watching the squirrels and birds bath and now the peaceful sounds of our fountain make it even more enjoyable.
  • ★【MULTI-OCCASIONS】The fountain pump can make circulation to your tank and give your lovely fish a near-natural environment. This submersible water pump can create water current, ideal for a medium-sized aquarium, small pond, water garden, and desktop water fountains. Perfect for backyard fountain/waterfall, aquarium, ponds, fish tank, tabletop fountains, garden statuary, patio drip irrigation system and hydroponic systems and more.
  • ★【ADJUSTABLE】The fountain pump is designed with an adjusting knob, allowing to get just the amount of water pressure you want. It comes with 3 optional nozzles to create different views, each with its own unique design.
  • ★【COMPACT BUT POWERFUL】The fountain pump’s compact design is easy to hide & disguise, 25W super efficiency motor continually lift water column. Reasonable long power cord is heavy duty and easy to installation. The pump has 4 strong rubber suction cups at the bottom of the fountain pump helps keep in your fish tank.
  • ★【EASY TO USE】The fountain pump's manual disassembly designed shell allow you clean the pump input port and filter/impeller easily. And simply plug in power for quick water draining.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

CWKJ Fountain Pump, 400GPH Submersible Water Pump, Durable 25W Outdoor Fountain Water Pump with 6.5ft Power Cord, 3 Nozzles for Aquarium, Pond, Fish Tank, Water Pump Hydroponics, Backyard Fountain – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

ZChiller – Spiral Star Design Counterflow Wort Chillers – Made in the US – $149.99 on clearance, half off

Large ZChillerZChillers are made in the US by Packless Industries located in Waco, Texas.

 ZChillers are double tube counter flow wort chillers.  The interior tubing is a Spiral Star Design.  This spiraling increases the surface area of copper that’s in contact with your wort.  It also increases turbulence.  More movement across more surface area means your wort chills quickly.

from AIH: “The ZChiller utilizes the enhanced thermal gradients of a counterflow wort chiller with the added benefit of greater surface area for heat transfer. Instead of a simple, cylindrical inner tube, the ZChiller utilizes a unique, convoluted “spiral star” design that enables superior heat transfer out of the wort as well as unparalleled cooling uniformity for consistent cold breaks and record cooling times. The chilling ability matches or exceeds that of plate chillers without the downside of disruptive clogs.”

These advantages result in:

  • Reduced chilling time.
  • More efficient cold break to remove unwanted proteins and particulates from your beer.
  • Cleaner aroma profile because of decrease in DMS production, giving you a more pronounced aroma that you have worked so hard for.
  • Easier cleaning, especially when compared to a plate chiller.

  • AIH has a massive clearance sale going on.
  • This is included in the mix and marked down a whopping 50% to $149.99.
  • No coupon code is required, but quantities may be limited. Check the product page to see if you can still get in on this.

Clearance Sale

Large ZChiller via Adventures in Homebrewing

homebrewing.org sale

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

More: Recent AIH Finds

Price, promotions and availability can change quickly.  Check the product page for current price, description and availability. prod:zchillers

660 GPH Utility Pump + Draft Line Cleaning Builds

Newpol 660GPH Submersible Pump, Ultra Quiet Water Pump (30W) for Aquarium, Water Feature, Pond, Fountain, Hydroponic

Newpol 660GPH Submersible Pump

More Info
Highlighted Features
  • ★ MULTI-USAGE: This submersible water pump can create water current, Perfect for garden statuary fountains/waterfall, aquarium, ponds, fish tank, patio drip irrigation system and hydroponic systems and more.
  • ★ Ultra Quiet Design: The relible and duarable motor does not produce much noise, providing you a quiet environment.
  • ★ DISASSEMBLE & CLEANING: Flexible structure design, you can disassemble and clean it so easily, without any tools.
  • ★ SPECS & DIMENSIONS: Size-4.2*2.5*3.8 inches. Long power cord-6.5ft(1.9m); Max. flow rate: 660 GPH (2500L/H); Max. lift height: up to 8.2 ft. Wattage: 30W. Voltage: 110-120V, 3 NOZZLES -- Each water pump has 3 nozzles for option: 0.5"/0.62"/0.75"
  • ★ Customer Oriented Service: Our submersible pump is built with durability in mind and safety for every design. In the remote possibility that you’re not satisfied with our product, just contact us, 12 Month Warranty and 24 Hour Professional After-sales Service.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Newpol 660GPH Submersible Pump, Ultra Quiet Water Pump (30W) for Aquarium, Water Feature, Pond, Fountain, Hydroponic – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

660 GPH Utility Pump + Draft Line Cleaning Builds

Newpol 660GPH Submersible Pump, Ultra Quiet Water Pump (30W) for Aquarium, Water Feature, Pond, Fountain, Hydroponic

Newpol 660GPH Submersible Pump

More Info
Highlighted Features
  • ★ MULTI-USAGE: This submersible water pump can create water current, Perfect for garden statuary fountains/waterfall, aquarium, ponds, fish tank, patio drip irrigation system and hydroponic systems and more.
  • ★ Ultra Quiet Design: The relible and duarable motor does not produce much noise, providing you a quiet environment.
  • ★ DISASSEMBLE & CLEANING: Flexible structure design, you can disassemble and clean it so easily, without any tools.
  • ★ SPECS & DIMENSIONS: Size-4.2*2.5*3.8 inches. Long power cord-6.5ft(1.9m); Max. flow rate: 660 GPH (2500L/H); Max. lift height: up to 8.2 ft. Wattage: 30W. Voltage: 110-120V, 3 NOZZLES -- Each water pump has 3 nozzles for option: 0.5"/0.62"/0.75"
  • ★ Customer Oriented Service: Our submersible pump is built with durability in mind and safety for every design. In the remote possibility that you’re not satisfied with our product, just contact us, 12 Month Warranty and 24 Hour Professional After-sales Service.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Newpol 660GPH Submersible Pump, Ultra Quiet Water Pump (30W) for Aquarium, Water Feature, Pond, Fountain, Hydroponic – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

400 GPH Utility Pump + Draft Line Cleaning Builds

Fountain Pump, 400GPH Submersible Water Pump, Durable 25W Outdoor Fountain Water Pump with 6.5ft Power Cord, 3 Nozzles for Aquarium, Pond, Fish Tank, Water Pump Hydroponics, Backyard Fountain

Submersible Utility Pump

More Info
Highlighted Features
  • ★【PROVIDE YOU COMFORT & QUIET ENVIROMENT】Our fountain pump’s ultra-quiet operation will let you feel that the sounds of the water pouring out of your fountain is such a relaxing and tranquil sound, and you will love sitting out on your patio watching the squirrels and birds bath and now the peaceful sounds of our fountain make it even more enjoyable.
  • ★【MULTI-OCCASIONS】The fountain pump can make circulation to your tank and give your lovely fish a near-natural environment. This submersible water pump can create water current, ideal for a medium-sized aquarium, small pond, water garden, and desktop water fountains. Perfect for backyard fountain/waterfall, aquarium, ponds, fish tank, tabletop fountains, garden statuary, patio drip irrigation system and hydroponic systems and more.
  • ★【ADJUSTABLE】The fountain pump is designed with an adjusting knob, allowing to get just the amount of water pressure you want. It comes with 3 optional nozzles to create different views, each with its own unique design.
  • ★【COMPACT BUT POWERFUL】The fountain pump’s compact design is easy to hide & disguise, 25W super efficiency motor continually lift water column. Reasonable long power cord is heavy duty and easy to installation. The pump has 4 strong rubber suction cups at the bottom of the fountain pump helps keep in your fish tank.
  • ★【EASY TO USE】The fountain pump's manual disassembly designed shell allow you clean the pump input port and filter/impeller easily. And simply plug in power for quick water draining.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

CWKJ Fountain Pump, 400GPH Submersible Water Pump, Durable 25W Outdoor Fountain Water Pump with 6.5ft Power Cord, 3 Nozzles for Aquarium, Pond, Fish Tank, Water Pump Hydroponics, Backyard Fountain – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

ZChiller – Spiral Star Design Counterflow Wort Chillers – Made in the US – $149.99 on clearance, half off

Large ZChillerZChillers are made in the US by Packless Industries located in Waco, Texas.

 ZChillers are double tube counter flow wort chillers.  The interior tubing is a Spiral Star Design.  This spiraling increases the surface area of copper that’s in contact with your wort.  It also increases turbulence.  More movement across more surface area means your wort chills quickly.

from AIH: “The ZChiller utilizes the enhanced thermal gradients of a counterflow wort chiller with the added benefit of greater surface area for heat transfer. Instead of a simple, cylindrical inner tube, the ZChiller utilizes a unique, convoluted “spiral star” design that enables superior heat transfer out of the wort as well as unparalleled cooling uniformity for consistent cold breaks and record cooling times. The chilling ability matches or exceeds that of plate chillers without the downside of disruptive clogs.”

These advantages result in:

  • Reduced chilling time.
  • More efficient cold break to remove unwanted proteins and particulates from your beer.
  • Cleaner aroma profile because of decrease in DMS production, giving you a more pronounced aroma that you have worked so hard for.
  • Easier cleaning, especially when compared to a plate chiller.

  • AIH has a massive clearance sale going on.
  • This is included in the mix and marked down a whopping 50% to $149.99.
  • No coupon code is required, but quantities may be limited. Check the product page to see if you can still get in on this.

Clearance Sale

Large ZChiller via Adventures in Homebrewing

homebrewing.org sale

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

More: Recent AIH Finds

Price, promotions and availability can change quickly.  Check the product page for current price, description and availability. prod:zchillers

VIVOSUN 400 GPH Utility Pump + Draft Line Cleaning Builds

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles

More Info
Highlighted Features
  • Specifications: Dimensions: 4.1'' x 2.52'' x 2.95''; The 5-ft. long power cord offers convenient installation; Max. Flow Rate: 400 GPH (1500L/H); Max. Lift Height: up to 5.3 ft.; Wattage: 15W; Voltage: 110-120V
  • Detachable & Cleanable: This compact water pump is easy to hide or disguise and no additional tools are needed for disassembly and cleaning
  • A Variety of Outlet Positions: Place the pump flat and choose whichever outlet position suits your needs
  • Wide Range of Applications: High performance energy-efficient pump designed for use in ponds, fountains, waterfalls, hydroponic systems, irrigation systems and other water features
  • Warranty: Super durable & reusable, this pump comes with a 2-Year warranty; If you have any problems with the item you receive, please contact us without hesitation

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

VIVOSUN 400 GPH Utility Pump + Draft Line Cleaning Builds

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles

More Info
Highlighted Features
  • Specifications: Dimensions: 4.1'' x 2.52'' x 2.95''; The 5-ft. long power cord offers convenient installation; Max. Flow Rate: 400 GPH (1500L/H); Max. Lift Height: up to 5.3 ft.; Wattage: 15W; Voltage: 110-120V
  • Detachable & Cleanable: This compact water pump is easy to hide or disguise and no additional tools are needed for disassembly and cleaning
  • A Variety of Outlet Positions: Place the pump flat and choose whichever outlet position suits your needs
  • Wide Range of Applications: High performance energy-efficient pump designed for use in ponds, fountains, waterfalls, hydroponic systems, irrigation systems and other water features
  • Warranty: Super durable & reusable, this pump comes with a 2-Year warranty; If you have any problems with the item you receive, please contact us without hesitation

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

VIVOSUN 400GPH Submersible Pump(1500L/H, 15W), Ultra Quiet Water Pump with 5.3ft High Lift, Fountain Pump with 5ft Power Cord, 2 Nozzles for Fish Tank, Pond, Aquarium, Statuary, Hydroponics – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

1,300 GPH! Submersible Water Pump – Draft Line Cleaning, Wort Chiller Recirculation

1300GPH Submersible Pump(5000L/H, 125W), Ultra Quiet Water Pump with 16.4ft. High Lift, Fountain Pump 3 Hose Adapter for Fish Tank, Pond, Aquarium, Statuary, Hydroponics, Hottub

Submersible Water Pump

More Info
Highlighted Features
  • Multifunctional Water Pump: Water Pump with the dimension:6.8*6.8*5.3inches, suitable for both indoor & outdoor use like aquariums, bird bathing, sculpture cleaning, vase fountains, etc.
  • With Bottom Suction Trainer: The water inlet is on the bottom of the pump, which could drain as much water as it can; The 360⁰ omnidirectional filtering cleans out excrement and crud while keeping water circulating all around.
  • Strong Power & High Lift: 1300GPH STRONG POWER and HIGH LIFT. Max Lift Height: 16.4 ft. 125W high efficiency motor for energy saving.
  • Ultra Quiet Design: The reliable and durable motor does not make much noise, providing you a quiet environment
  • Widely Applied: 5.9FT power cord long enough for easy installation. Equipped with 2/3", 4/5"and 1" in total 3 nozzles in the package. This submersible pump is perfect for aquarium, fountains, spout and hydroponic systems, etc.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential Uses:

  • I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly
  • As part of a recirculating wort chiller setup (on the chilled water side).

 

1300GPH Submersible Pump(5000L/H, 125W), Ultra Quiet Water Pump with 16.4ft. High Lift, Fountain Pump 3 Hose Adapter  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related: Our Line Cleaning Builds:

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

210 GPH Submersible Utility Pump + Our Draft Line Cleaning Builds

210 GPH Submersible Pump

More Info

From the product description, check product page for current description, price and availability:

Highlighted Features
  • 【ADJUSTABLE】Designed with a adjusting knob, allowing to adjust the water flow rate.
  • 【STEADY STAY】Rubber suction cups can be a good fit in the glass surface, to help keep it stability.
  • 【CLEANABLE】No need any tools to detach it, easy to separate, easy to clean.
  • 【ULTRA-QUIET】Energy-saving low power, keep reliability and low noise operation, giving you quiet environment.
  • 【WIDELY USED】This submersible pump is perfect for aquariums, fountains, ponds and hydroponic systems, etc.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

Lyqily 210GPH Water Pump Ultra Quiet 15W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 5.2ft High Lift, 5.9ft Two-pin Plug Power Cord, 2 Nozzles (0.33“/0.51”  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Continue reading

Lyqily 740GPH Submersible Water Pump – Draft Line Cleaning, Potential Mark II Replacement & More

Lyqily 740GPH Submersible Water Pump Ultra Quiet 55W

More Info
Highlighted Features
  • 【ADJUSTABLE】Designed with a adjusting knob, allowing to adjust the water flow rate.
  • 【STEADY STAY】Rubber suction cups can be a good fit in the glass surface, to help keep it stability.
  • 【CLEANABLE】No need any tools to detach it, easy to separate, easy to clean.
  • 【ULTRA-QUIET】Energy-saving low power, keep reliability and low noise operation, giving you quiet environment.
  • 【WIDELY USED】This submersible pump is perfect for aquariums, fountains, ponds and hydroponic systems, etc.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

Potential Uses:

Photo via Sourcing a Replacement Pump for Mark’s Keg and Carboy Washer

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Two-pin Plug Power Cord, 3 Nozzles(0.51″/0.63″/0.75″)  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related: Our Line Cleaning Builds:

Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!