Category Archives: PID Controllers

Inkbird PID Temperature Controller + Sensor, Relay and Heat Sink

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink by Inkbird

More Info

From the product description, check product page for current description, price and availability:

  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time

 

PID Temperature Controllers can be used in conjunction with a relay and a temperature probe to control the your kegerator and fermentation temps. You can also integrate a PID controller into your brew system to control mash temps and more.

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink – note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Inkbird Temperature Controller Deals and Reviews!

Inkbird PID Temperature Controller + Sensor, Relay and Heat Sink

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink by Inkbird

More Info

From the product description, check product page for current description, price and availability:

  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time

 

PID Temperature Controllers can be used in conjunction with a relay and a temperature probe to control the your kegerator and fermentation temps. You can also integrate a PID controller into your brew system to control mash temps and more.

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink – note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Inkbird Temperature Controller Deals and Reviews!

PID Temperature Controller Kit – Includes Sensory & Relay

PID Temp Controller Kit

More Info
Highlighted Features
  • ♥【What You Get】In this PID temperature controller kit,it include 1 x PID temperature controller,1 x solid state relay 40DA,1 x K type thermocouple,1 x heat sink.
  • ♥【Product parameters】Power supply voltage:110-240VAC 50/60Hz;power comsumption:≤5VA;working environment:ambient temperature: 0℃~50℃,relative humidity: 35%~85% (no condensation) ;storage temperature:-25℃~65℃(avoid ice or dew);resolution:1℃,0.1℃(adjustable);wiring method:terminals;accuracy:+0.5%FS;memory protection:non-volatile memory;installation environment:installation type ll, pollution grade 2 (IEC61010-1);logic level output:ON:DC12V; OFF: below DC0.5V; max current: 30mA, load resistance:≥1K.
  • ♥【Feature】 Support 2 wire thermocouple input,1 way solid state relay output,1 way relay alarm output;digital display of real-time and set temperatures,adjustable degrees ℉ and ℃.
  • ♥【Size】The panel size of PID temperature controller is 48(W)mmx48mm(L),install hole size is 46(W)mmx46mm(L).Total size:48mm(W)x48mm(L)x76mm(H)
  • ♥【Widely application】Widely used in chemical industry, medical industry, product industry, machinery industry, greenhouse farming, agricultural planting, etc.

 

 

PID Temperature Controllers can be used in conjunction with a relay and a temperature probe to control the your kegerator and fermentation temps. You can also integrate a PID controller into your brew system to control mash temps and more.

CGELE PID Temperature Controller Kit Voltage AC 100V to 240V Comes with SSR 40DA Solid State Relay, K Type Thermocouple Sensor, and Black Heat Sink – note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Inkbird Temperature Controller Deals and Reviews!

Inkbird PID Temperature Controller + Sensor, Relay and Heat Sink

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink by Inkbird

More Info

From the product description, check product page for current description, price and availability:

  • 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC, you may connect it with a buzzer.
  • 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor, like K type thermocouple and Cu500, are supported by this PID temperature controller
  • 【SSR Output】With one relay output for external SSR, SSR or relay is a must for this temperature controller. A 40DA SSR is included
  • 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
  • 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time

 

PID Temperature Controllers can be used in conjunction with a relay and a temperature probe to control the your kegerator and fermentation temps. You can also integrate a PID controller into your brew system to control mash temps and more.

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV, Comes with SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink – note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Inkbird Temperature Controller Deals and Reviews!

Inkbird IPB-16s PID Temperature Controller

Inkbird 120V 15A 1800W Heating or Cooling PID Temperature Controller, Plug and Play IPB-16S Prewired Digital Home Brewing and Distillation Controller, Independent Control Pump Thermostat with 2 Plugs

More Info
Highlighted Features
  • 🙌🙌【Plug-n-Play Easy Operation】The electric home brewing controller is an all-in-one machine and no more installation is needed. Just plug in and set up the system according to your needs.
  • 🙌🙌【Precise Control】PID digital controller provides accurate temperature control at the range of -50~125℃/ -58~257℉, and the accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • 🙌🙌【Independent Pump Function】The Pump Function is special designed for home brewing customers and it can be operated separately, just access your pump and press the “Pump” button when you need it.
  • 🙌🙌【Safety】The controller with overload protection has adopted high quality metal case and aluminum cooling plate, 6.5’ power cord and 2 prong plugs to ensure the safety of your electrical appliances.
  • 🙌🙌【Working environmental temperature】-10~55ºC/14~131ºF(not freezing or condensation state)

 

Inkbird Heating or Cooling PID Temperature Controller IPB-16S Pre-Wired Digital Home Brewing Controller Independent Control Pump Thermostat – note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider: Inkbird Dual Stage Temp Controller – Hands on Review – Inkbird Deals

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller – HALF OFF COUPON

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation] + Hands on Review


PID Temperature Controller Kit – Includes Sensory & Relay

PID Temp Controller Kit

More Info
Highlighted Features
  • ♥【What You Get】In this PID temperature controller kit,it include 1 x PID temperature controller,1 x solid state relay 40DA,1 x K type thermocouple,1 x heat sink.
  • ♥【Product parameters】Power supply voltage:110-240VAC 50/60Hz;power comsumption:≤5VA;working environment:ambient temperature: 0℃~50℃,relative humidity: 35%~85% (no condensation) ;storage temperature:-25℃~65℃(avoid ice or dew);resolution:1℃,0.1℃(adjustable);wiring method:terminals;accuracy:+0.5%FS;memory protection:non-volatile memory;installation environment:installation type ll, pollution grade 2 (IEC61010-1);logic level output:ON:DC12V; OFF: below DC0.5V; max current: 30mA, load resistance:≥1K.
  • ♥【Feature】 Support 2 wire thermocouple input,1 way solid state relay output,1 way relay alarm output;digital display of real-time and set temperatures,adjustable degrees ℉ and ℃.
  • ♥【Size】The panel size of PID temperature controller is 48(W)mmx48mm(L),install hole size is 46(W)mmx46mm(L).Total size:48mm(W)x48mm(L)x76mm(H)
  • ♥【Widely application】Widely used in chemical industry, medical industry, product industry, machinery industry, greenhouse farming, agricultural planting, etc.

 

 

PID Temperature Controllers can be used in conjunction with a relay and a temperature probe to control the your kegerator and fermentation temps. You can also integrate a PID controller into your brew system to control mash temps and more.

CGELE PID Temperature Controller Kit Voltage AC 100V to 240V Comes with SSR 40DA Solid State Relay, K Type Thermocouple Sensor, and Black Heat Sink – note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Inkbird Temperature Controller Deals and Reviews!

PID Temperature Controller Kit – Includes Sensory & Relay

PID Temp Controller Kit

More Info
Highlighted Features
  • ♥【What You Get】In this PID temperature controller kit,it include 1 x PID temperature controller,1 x solid state relay 40DA,1 x K type thermocouple,1 x heat sink.
  • ♥【Product parameters】Power supply voltage:110-240VAC 50/60Hz;power comsumption:≤5VA;working environment:ambient temperature: 0℃~50℃,relative humidity: 35%~85% (no condensation) ;storage temperature:-25℃~65℃(avoid ice or dew);resolution:1℃,0.1℃(adjustable);wiring method:terminals;accuracy:+0.5%FS;memory protection:non-volatile memory;installation environment:installation type ll, pollution grade 2 (IEC61010-1);logic level output:ON:DC12V; OFF: below DC0.5V; max current: 30mA, load resistance:≥1K.
  • ♥【Feature】 Support 2 wire thermocouple input,1 way solid state relay output,1 way relay alarm output;digital display of real-time and set temperatures,adjustable degrees ℉ and ℃.
  • ♥【Size】The panel size of PID temperature controller is 48(W)mmx48mm(L),install hole size is 46(W)mmx46mm(L).Total size:48mm(W)x48mm(L)x76mm(H)
  • ♥【Widely application】Widely used in chemical industry, medical industry, product industry, machinery industry, greenhouse farming, agricultural planting, etc.

 

 

PID Temperature Controllers can be used in conjunction with a relay and a temperature probe to control the your kegerator and fermentation temps. You can also integrate a PID controller into your brew system to control mash temps and more.

CGELE PID Temperature Controller Kit Voltage AC 100V to 240V Comes with SSR 40DA Solid State Relay, K Type Thermocouple Sensor, and Black Heat Sink – note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Inkbird Temperature Controller Deals and Reviews!

Inkbird IPB-16S Prewired Digital Homebrewing Controller w/Pump Control [RIMS, HERMS & more]

Inkbird 120V 15A 1800W Heating or Cooling PID Temperature Controller, Plug and Play IPB-16S Prewired Digital Home Brewing and Distillation Controller, Independent Control Pump Thermostat with 2 Plugs

More Info
Highlighted Features
  • 🙌🙌【Plug-n-Play Easy Operation】The electric home brewing controller is an all-in-one machine and no more installation is needed. Just plug in and set up the system according to your needs.
  • 🙌🙌【Precise Control】PID digital controller provides accurate temperature control at the range of -50~125℃/ -58~257℉, and the accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • 🙌🙌【Independent Pump Function】The Pump Function is special designed for home brewing customers and it can be operated separately, just access your pump and press the “Pump” button when you need it.
  • 🙌🙌【Safety】The controller with overload protection has adopted high quality metal case and aluminum cooling plate, 6.5’ power cord and 2 prong plugs to ensure the safety of your electrical appliances.
  • 🙌🙌【Working environmental temperature】-10~55ºC/14~131ºF(not freezing or condensation state)

 

Inkbird Heating or Cooling PID Temperature Controller IPB-16S Pre-Wired Digital Home Brewing Controller Independent Control Pump Thermostat – note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider: Inkbird Dual Stage Temp Controller – Hands on Review – Inkbird Deals

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller – HALF OFF COUPON

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation] + Hands on Review


Inkbird IPB-16S Prewired Digital Homebrewing Controller w/Pump Control [RIMS, HERMS & more]

Inkbird 120V 15A 1800W Heating or Cooling PID Temperature Controller, Plug and Play IPB-16S Prewired Digital Home Brewing and Distillation Controller, Independent Control Pump Thermostat with 2 Plugs

More Info
Highlighted Features
  • 🙌🙌【Plug-n-Play Easy Operation】The electric home brewing controller is an all-in-one machine and no more installation is needed. Just plug in and set up the system according to your needs.
  • 🙌🙌【Precise Control】PID digital controller provides accurate temperature control at the range of -50~125℃/ -58~257℉, and the accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • 🙌🙌【Independent Pump Function】The Pump Function is special designed for home brewing customers and it can be operated separately, just access your pump and press the “Pump” button when you need it.
  • 🙌🙌【Safety】The controller with overload protection has adopted high quality metal case and aluminum cooling plate, 6.5’ power cord and 2 prong plugs to ensure the safety of your electrical appliances.
  • 🙌🙌【Working environmental temperature】-10~55ºC/14~131ºF(not freezing or condensation state)

 

Inkbird Heating or Cooling PID Temperature Controller IPB-16S Pre-Wired Digital Home Brewing Controller Independent Control Pump Thermostat – note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider: Inkbird Dual Stage Temp Controller – Hands on Review – Inkbird Deals

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller – HALF OFF COUPON

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation] + Hands on Review


Inkbird IPB-16S Prewired Digital Homebrewing Controller w/Pump Control [RIMS, HERMS & more]

Inkbird 120V 15A 1800W Heating or Cooling PID Temperature Controller, Plug and Play IPB-16S Prewired Digital Home Brewing and Distillation Controller, Independent Control Pump Thermostat with 2 Plugs

More Info
Highlighted Features
  • 🙌🙌【Plug-n-Play Easy Operation】The electric home brewing controller is an all-in-one machine and no more installation is needed. Just plug in and set up the system according to your needs.
  • 🙌🙌【Precise Control】PID digital controller provides accurate temperature control at the range of -50~125℃/ -58~257℉, and the accuracy of the temperature is ±0.1℃ or ±0.2℉.
  • 🙌🙌【Independent Pump Function】The Pump Function is special designed for home brewing customers and it can be operated separately, just access your pump and press the “Pump” button when you need it.
  • 🙌🙌【Safety】The controller with overload protection has adopted high quality metal case and aluminum cooling plate, 6.5’ power cord and 2 prong plugs to ensure the safety of your electrical appliances.
  • 🙌🙌【Working environmental temperature】-10~55ºC/14~131ºF(not freezing or condensation state)

 

Inkbird Heating or Cooling PID Temperature Controller IPB-16S Pre-Wired Digital Home Brewing Controller Independent Control Pump Thermostat – note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider: Inkbird Dual Stage Temp Controller – Hands on Review – Inkbird Deals

Inkbird ITC-308 WiFi Digital Dual Stage Temp Controller – HALF OFF COUPON

Inkbird ITC-308 Digital Dual Stage Temp Controller [Kegerator or Fermentation] + Hands on Review