Category Archives: Homebrew Shops

FermZilla Conical Fermenter Gen 3 Conical, 27L – on sale for $139.99

FermZilla Tri-Conical Fermenter | Gen 3.2 | 3 in. T.C. Collection Container | 27L | 7.1G
FE113

FermZilla Tri-Conical Fermenter | Gen 3.2 | 3 in. T.C. Collection Container | 27L | 7.1G
FE113

More Info

From the product description, check product page for current description, price and availability:

The ultimate plastic pressurized conical

A best seller for a reason! Tons of features at an incredible cost
Crystal Clear super smooth PET makes fermenting and cleaning super easy
3″ Butterfly valve at bottom makes removing yeast/trub easy with the 600mL collection jar.
Pressurizable (with accessories) for fermentation and closed transfer to your keg
The Gen 3.2 FermZilla Tri-Conical features a newly designed collection container with top & bottom PCO1881 ports. The collection container has a 3″ T.C. opening and installs on the Conical with a 3″ T.C. butterfly valve. The molded 3″ T.C. ferrule on the tank is a huge improvement over the Gen 2 model—eliminating the complicated dump valve design and simplifying the collection container connection. Brew with confidence on the new Tri-Clover FermZilla!

Out of the box, the FermZilla Conical is an amazing fermenter that will immediately step up your game on the cold side of the brewing process. But what we love most about this unit is how easily it is to upgrade as you go—adding more functionality and gaining more precise control over your fermentation with each new accessory. Below are some of our favorite add-ons for the FermZilla Tri-Conical Fermenter.

Pressure Kit
The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full blown stainless steel unit. It allows you to dump trub, harvest yeast, and with the addition of the FermZilla Pressure Kit, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure.

Tri-Clamp Pressure Lid
Add a 2″ T.C. port to your fermenter by replacing the standard lid with the FermZilla Tri-Clamp Pressure Lid. This will give you an opening to add dry hops or other additions without needing to remove the entire lid, or you can upgrade down the road with a Hop Bong sight glass in order to add CO2 and purge your hop charge of oxygen. PCO1881 threaded ports are still there for Ball Lock Caps, as well as undrilled ports for an optional Thermowell and Temp Twister cooling coil.

Hop Bong Pressure Pack
The ultimate upgrade kit! The Hop Bong Pressure Pack has all of the parts included with the Pressure Kit and Tri-Clamp Pressure Lid but fully parted out to remove the guess work. If the Tri-Conical is your first FermZilla fermenter, this accessory kit is for you. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.

FermZilla Gen 3 vs Gen 3.2:

3″ x 3″ T.C. butterfly dump valve
3″ T.C. compatible collection container
600 mL collection container w/ top & bottom PCO1881 threaded ports
What’s Included:

FermZilla 27L Tank with 3″ T.C. Bottom Port
3″ T.C. Butterfly Valve
600 mL Collection Container with 3″ T.C. Connection
Stainless Steel Stand with Swing Handles
Stainless Steel Handle Assembly
Top Lid with PRV (35 psi)
3″ tri-clamp with gaskets
3-Piece Airlock
Graduation Sticker
Adhesive Thermometer
Spare Seals
Specs:

27 L (7.1 gal) Total Volume
Pressure Rated to 2.4 Bar (34.8 psi)
Height in Stand – 29.5″
Height w/ Airlock – 33.7″
Tank Diameter – 13.9″
Diameter in Stand – 15.3″
Lid & Collection Container Ports – 28 mm PCO 1881 threads
Temperature Rating:
When not under pressure, do not expose to liquids above 131°F
When under pressure, do not expose to any temperatures above 95°F*
*Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years.

Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.

Pressure Stress
If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple:

Fill the tank to the brim with water
Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher
Pressurize the tank to 4 BAR (58 psi)
Check for leaks, then replace the Red PRV when finished
If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla.

General Care
Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.

KegLand Part number: KL25898

NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. Hydro test instructions are available here. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.


 

 

FermZilla Tri-Conical Fermenter | Gen 3.2 | 3 in. T.C. Collection Container | 27L | 7.1G FE113 – Stainless Steel Pressure Kit for FermZilla FE135

Limited Time DEAL!

MoreBeer is discounting select products by up to 40% as part of a Summer Sale!

MoreBeer’s Summer Sale!


These are included in the mix and on sale for just $139.99.

Hands on Review: Fermzilla Conical Fermenter

More Fermentation Related!

 

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability

Save via William’s Brewing 10 lb Sacks of Base Grain + Stacking FREEBIE Deal

williams brewing malt deal

  • Williams Brewing has select malt available in 10 lb bags. Save versus by individual lbs.
  • These also qualify for their free or flat shipping.
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.
  • Buy 5 x 10 lb bags and you have the equivalent of a sack of grain.

Base Malt in 10 Pound Bags

+ Get a FREEBIE!

  • Place an order with a subtotal of $99 or more and enter web coupon code BBQFUN at checkout and you’ll get a free summer BBQ package… high temp gloves, thermometer and flying disc.
  • No need to add the items to your cart.  Just use the coupon code and they will be automatically added at checkout.

Free Summer BBQ Package –  remember coupon code BBQFUN

Do you BBQ?  If so, check out my BBQ site… BBQ Finds


deals on sacks of malt


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Visit William’s Brewing – Web Only Clearance Sale

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsbuyageta tag:wmsperoff rpu:wms10lbgrain

Kegland’s Bucket Buddy Stainless Steel Fermenter – on sale for… $152.99

kegland bucket buddy

Bucket Buddy Electric Fermenter – 35L/9.25G (110V) via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

If you’ve been looking to step up from fermenting in plastic buckets or carboys, this is an excellent choice for your next fermenter. Stainless steel is a much better option than glass or plastic, as it is extremely easy to clean and virtually lasts forever. There’s also much less chance of contamination as stainless doesn’t scratch like plastic. Over time, you’ll get scratches in plastic fermenters from normal wear and tear, creating microscopic havens for bacteria. Meanwhile, glass carboys are always at risk of breaking which is something you will never have to worry about with stainless steel.

The Bucket Buddy represents a great value for a stainless fermenter in this size. Another advantage over carboys and plastic buckets is the domed base inside the fermenter which is great for yeast flocculation when fermentation is complete. The included racking arm will make it easy to transfer out every last drop of beer while leaving the yeast cake undisturbed. The entire racking arm and ball valve assembly is weldless, which means you can remove the assembly to clean and sanitize it between batches. You can even boil the assembly for added assurance that it’s been sterilized.

Also available with built-in heating element for fermenting in colder environments. You can also use a heat wrap or heat belt on the outside of this unit. To help maintain a steady temperature, the Bucket Buddy pairs well with either the BrewZilla Neoprene Jacket or the FermZilla Insulating Jacket. For cooling, you can place the fermenter in a dedicated refrigerator or drill into the lid to install a Temp Twister Cooling Coil. A temperature controller probe can then be inserted into the thermowell to control your heating and cooling sources.

This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans, as well as a stopper and airlock for the domed lid.

Specifications:

304 stainless steel construction
9 gallon total capacity
Digital thermometer (Temp reads in °C)
Weldless thermowell
Stainless steel outlet valve with rotating racking arm
Stopper & airlock included
External Dimensions: 28″ H x 15″ W (including handles)
Internal Dimensions: 22″ H x 11.75″ W
KegLand Part Number: KL15103

 

Bucket Buddy Stainless Fermenter – 35L/9.25G FE190

Limited Time DEAL!

MoreBeer is discounting select products by up to 40% as part of a Summer Sale!

MoreBeer’s Summer Sale!


These are included in the mix and on sale for $152.99

Also available in a heated version: Stainless Bucket Fermenter w/ Heating – 35L/9.25G (110V) FE191

More Fermentation Related!

 


This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

FerMonster 3 Gallon Fermenter – on sale for $20.39 + my step by step process for small batch all grain

3 Gallon Ported FerMonster Large Mouth Fermenter from MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization – no ribs or texture to collect yeast or bacteria. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center. Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.

Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. Due to the thickness of the material and the overall geometry the Fermonster does not require ribs or dimples for stability. That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market. The huge 4″ opening makes filling a breeze, and cleanup is as easy as wiping down the inside.

These fermentors are completely air-tight and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.

Features:

4″ inner diameter wide mouth carboy – easy to clean!
Food grade PET plastic construction is nearly impermeable to oxygen penetration
No hard to clean dimples or ribs
Punted bottom
O-Ring and Lid with one hole is included (Fits #10 Stopper)
Additional O-Rings and Lids available
Weight: 1.5 lbs
Temperature Limit: 140° F
Height: 14.6 inches
Diameter: 9 inches
Completely taste and odor free
Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage!
Thick walls for better oxygen barrier.


 

Learn More: Hands on Review: FerMonster Fermentors

Fermonster Carboy – 3 gal. FE258

Limited Time DEAL!

MoreBeer is discounting select products by up to 40% as part of a Summer Sale!

MoreBeer’s Summer Sale!


These are included in the mix and on sale for just $20.59.

My Step by Step Small Batch All Grain Process:

Small Batch, All Grain Stove Top Brewing + Water Calculation Spreadsheet

Hands on Review:

Hands on Review: Fermonster Fermentors

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:b3si

MoreBeer Summer Sale… Up to 40% Off!

MoreBeer is discounting select products by up to 40% as part of a Summer Sale!

MoreBeer’s Summer Sale!


This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Ends Soon: FermZilla 27 Liter Tri Conical Fermenter – on sale for… $127.99 at William’s Brewing + Free Summer BBQ Package!

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The Gen 3.2 FermZilla Tri Conical features a 3” Tri-Clamp fitting to attach the dump valve, and a 2” Tri-Clamp fitting to attach the improved 3.2 yeast collection vessel. This makes it easy to disassemble the fermenter for cleaning, and to remove and reattach the yeast collection vessel.

The FermZilla can be used in many ways -use it as a basic gravity fermenter with the ability to dump and harvest yeast, or as a pressure fermenter and or keg with optional Spunding Valve part C71 and Pressure Kit part C77, as a chilled fermenter with an optional Temp Twister and Cooling Kit, and even as a Hop Bong Pressure Kit, with the ability to add dry hops without adding oxygen.

Includes a lid with 35 PSI PRV valve, stainless stand, airlock, 600 ml collection container with 3″ Tri Clamp lid, and Tri Clamp fittings to assemble and use the fermenter. Overall height with airlock is 34″, with a width of 14″.

 

  • William’s Brewing has this on sale for just $127.99
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter

FermZilla Reviews!

+ Get a FREEBIE!

  • Place an order with a subtotal of $99 or more and enter web coupon code BBQFUN at checkout and you’ll get a free summer BBQ package… high temp gloves, thermometer and flying disc.
  • No need to add the items to your cart.  Just use the coupon code and they will be automatically added at checkout.

Free Summer BBQ Package –  remember coupon code BBQFUN

Do you BBQ?  If so, check out my BBQ site… BBQ Finds

Hands on Review!

fermzilla conical fermenter review

Hands on Review: FermZilla All Rounder Fermenter

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Visit William’s Brewing – Web Only Clearance Sale

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsfermzilla tag:wms27fzconical tag:wmsbuyageta 

The Didn’t Get What You Wanted “Prime” Quality O-Ring Sale – Food Safe Replacement Keg O-Rings

valuebrew.com sale

For a short time, Valuebrew is discounting most of their gear including bulk food grade o-rings (i

Valuebrew offers a lineup of food grade keg replacement o-rings in bulk quantities.  Most offerings are silicone or EPDM with one Buna-N option.  Everything they carry is food grade, more info below.  They have some unique offerings like bulk pin lock size post o-rings, replacement universal poppet o-rings, bulk internal QD o-rings and color coded Blue and Green post o-rings

Some of these offerings are detailed in our Keg Rebuild How-To

Save an EXTRA 15% when you spend $30 or more on select items at Valuebrew.  This stacks on top of existing discounts. Includes…

Use coupon code PRIME with an order of $30 or more to get the deal

Reader Feedback!

Thanks to John for the feedback via Facebook!  Connect with HBF on Facebook & More

More about food safe materials:

For whatever reason, it’s difficult to find food safe keg o-rings.  Maybe some of the o-rings that are available are food safe, but very few are actually labeled as such.

The fact is we’re putting beer (food) in our kegs and we should be using food safe materials whenever we can.  More Info: Food Safe Replacement Keg O-Rings

Featured in Our Keg Rebuild Post!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. prod:vb

DEAL! Cannular PRO Semi-Auto Bench Top Can Seamer – Crowler Compatible!

 Cannular Pro Semi-Auto Bench Top Can Seamer

Cannular Pro Semi-Auto Bench Top Can Seamer via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple.

Whether you’re a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you’ll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs.

Cannular Pro vs. Manual Unit
This new Semi-Auto Pro model will guarantee you get a consistent seaming process every time. Unlike the less expensive manual can seamer, this machine has no lever for the seaming operation, meaning it’s even easier for the operator to seam the can consistently and will not vary on how hard the operator is pulling the lever.

Another major difference is that the Cannular’s Pro table spacer is specially designed to work with both 500ml (16.9 oz) and 330ml (11.2 oz) Can Fresh Aluminum Cans right out of the box. Unlike the manual model that requires a secondary table spacer for use with 330ml cans, the Pro model features an adjustable platform, allowing you to raise or lower the table spacer depending on what size can you’re seaming. We have tested standard 202 cans and have been able to achieve good seals with proper adjustments. It is necessary to adjust the table height to ensure you have the appropriate amount of pressure applied when the can lift is raised.

Operation:
The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows:

  • Place lid atop the can and place the can on the table spacer
  • Turn the platform lever clockwise to raise the can to the seamer
  • Press the seaming operation button then wait for the can to stop spinning
  • Turn the platform lever counterclockwise to lower the can
  • That’s all there is to it!

Construction:
The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there’s no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible.

Power:
As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. When purchasing the unit, you have the option of pairing it with either a power supply with 110V plug (CAN101), or with a 6 ft. long cord with Anderson plug and alligator clips (CAN102). The power supply is straight forward, and allows you to plug the unit into a standard 110V power socket. The alligator clips give you the option to power the unit from a battery, and can even be used with an 18V cordless power drill battery. This is certainly the most affordable option for powering the Cannular, and we’ve found that upwards of 200 cans can be seamed on a single battery charge.

Why Cans?
So why can when you can bottle? There’s no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren’t just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they’re also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There’s still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it’s important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the “sciency stuff”, cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won’t ruin your day!

Specifications:
Power: 250W 24V DC
Rated Speed: 3300 RPM
Gearbox Ratio: 9.8 : 1
Dimensions: 16″ L x 9.5″ W x 21″ H
Weight: 40 lbs
Splash guard not included
Please note the pictured splash guard is not included with the seamer. Please see CAN106 to add the splash guard to your order.

Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular’s test show that a .4mm (.015″) actual overlap is all that is needed to seal to 90 PSI. The proper table tension takes a little practice and expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment.


 

Works with Crowlers!

The Cannular Pro can be adapted for use with 32 oz Crowlers (Ball 300 can/end). To seam Ball 300 end/lid type oversized aluminium cans you will need to purchase the required Chuck for 1L (32 oz) Crowlers separately.

Cannular Pro Semi-Auto Bench Top Can Seamer CAN110

Periodically refurbished units become available: Cannular Pro Semi-Auto Bench Top Can Seamer – USED REFURBISHED CAN110-URFB

Limited Time DEAL!

MoreBeer is discounting select products by up to 40% as part of a Summer Sale!

MoreBeer’s Summer Sale!


This is included in the mix and on sale for $594.99

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Brewing Quality Beers by Byron Burch – $4.99 + Free Ship Eligible, Limited Availability, Matches 2018 Deal + Summer Sale Going on Now!

Brewing Quality Beers (Book) BK221

Brewing Quality Beers by Byron Burch via MoreBeer


From the book description, check product page for current description, price and availability:

National Champion Homebrewer Byron Burch gives his essential guidelines that will lead you to success. His recipes, techniques and secrets are revealed in this comprehensive book.


Limited Availability Deal of the Day: As of this posting, this is marked down to $3.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Brewing Quality Beers (Book) BK221

From the “prices on everything continue to skyrocket” department, this matches a deal of the day that was offered in November of 2018.

Deal is valid 7/19/24 only while supplies last

+ Summer Sale Happening Now!

MoreBeer is discounting select products by up to 40% as part of a Summer Sale!

MoreBeer’s Summer Sale!


This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:watch1

MoreBeer Chocolate Hazelnut Porter by Jamil Zainasheff! – All Grain Kit – $41.59, Save 20%, Limited Availability

chocolate hazelnut porter homebrew

  • MoreBeer’s Kit of the Week offers a 20% discount on a select recipe for a limited time.  Choose from all grain or extract versions while supplies last.
  • Shipping is also free to many US addresses with a qualifying $59 order
  • Custom Tap Handle: All of MoreBeer’s original recipe kits come with a full color insert that works with this custom tap handle
  • Easy Filler Item….  If you’re looking for a filler item to help you qualify for free shipping, consider grabbing some PBW

Check out this week’s Kit of the Week! – remember coupon code KOTW

This makes the all grain kit $41.59.

Chocolate Hazelnut Porter Kits at MoreBeer


  • Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends!
  • An incredible Porter recipe that adds a kick of hazelnut extract and cacao nibs that blends beautifully with the malt profile
  • Includes Kent Goldings and Willamette hops
  • Estimated ABV: 6.5%
  • Estimated IBUs: 30-33
  • Makes 5 gallons of finished beer

Jamil brews more, consistenly high-quality beer than any hombrewer we know. He won California Homebrewer of the Year in 2002, after winning over 150 total awards at brewing competitions, 55 of them being FirstPlace. Of all the beers that he brews, the Chocolate Hazlenut Porter (CHP, as Jamil says) is the cult favorite and the recipe he is asked-for the most. It also won Best of Show 2002, several First Place ribbons, and countless other awards. It comes complete with 25 ml of Hazlenut extract and 8 oz of chocolate. Jamil recommends using California yeast, WLP001. This kit has a lot of grain in it, so you may find two grain bags useful.

  • Makes 5 gallons
  • Estimated Original Gravity: 1.064-1.068
  • SRM (Color Range): 42
  • IBUs: 30-33
  • Estimated Alcohol Percentage: 6.5%

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pst:b3kotw-kit

10# CO2 Tank – on sale for $69.93 AND Free Ship Eligible

10# CO2 Tank Reconditioned Steel

AIH has these on sale for just $69.93.

AND… they qualify for free shipping with a qualifying order. Larger/heavier things generally are excluded from this so that’s a big savings.

10# CO2 Tank Reconditioned Steel

Also:

keg deals

kegdeals

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources


homebrewing.org sale

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

More: Recent AIH Finds

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Kegland 14 Gallon Insulated Mash Tun! – Save $40 via Summer Sale

Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal. AG336

Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal.

More Info

From the product description, check product page for current description, price and availability:

If you’re ready to step up to all grain brewing, this converted insulated cooler works wonders as a mash tun! The 14-gallon size can hold upwards of 25 lbs of grain, so there’s plenty of room for even the strongest 5-gallon beer recipes and is perfect for most 10 gallon batches up to 1.070 SG. Comes pre-assembled with stainless steel perforated false bottom, high temperature silicone tubing, and 1/2″ female threaded ball valve. Pair the valve with the male threaded fitting (plus a little plumber’s tape) that best suits your setup and you’ll off and running.

The cooler also works perfectly as a Hot Liquor Tank. Use with the false bottom in place, or simply remove it and keep it on hand in case you decide to use the cooler as a Mash Tun down the road. Two of these coolers plus the Fermentap Sparge Arm Assembly work perfectly as a gravity fed all-grain setup. To connect the cooler’s ball valve to the sparge arm assembly, we recommend a 1/2″ MPT x 3/8″ Barb fitting and 3/8″ ID silicone tubing. Plumber’s tape will ensure you have a leak-proof connection between the barb fitting and the ball valve.

Includes:

Insulated beverage cooler
Max Volume: 14.7 Gal (56 L)
Stainless dome-shaped perforated false bottom
High temperature silicone tubing
Stainless 1/2″ BSP ball valve
External Dimensions: Approx. 19″ L x 19″ W x 22″ H

KegLand Part Number: KL04671

 

Insulated Cooler Mash Tun | Hot Liquor Tank | 14 gal. AG336

MoreBeer is discounting select products by up to 40% as part of a Summer Sale!

MoreBeer’s Summer Sale!


This is included in the mix and marked down $40 to $119.99


This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:b3peroff

FREE Summer BBQ Package from William’s Brewing – stacks with malt sale & more

Freebie… Summer BBQ Package

  • Place an order with a subtotal of $99 or more and enter web coupon code BBQFUN at checkout and you’ll get a free summer BBQ package… high temp gloves, thermometer and flying disc.
  • No need to add the items to your cart.  Just use the coupon code and they will be automatically added at checkout.

Free Summer BBQ Package –  remember coupon code BBQFUN

Do you BBQ?  If so, check out my BBQ site… BBQ Finds

Works with everything sitewide including these deals!…


Barke Munich Malt Sale!

  • For a limited time William’s Brewing has Barke Munich Malt marked down 20%
  • 10 lbs are on sale for $19.99 and qualify for flat rate or free shipping
  • 55 lb sacks are on sale for $63.99 + actual shipping charges

Weyermann Barke Munich Malt Deal!


FermZilla Deal!

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The Gen 3.2 FermZilla Tri Conical features a 3” Tri-Clamp fitting to attach the dump valve, and a 2” Tri-Clamp fitting to attach the improved 3.2 yeast collection vessel. This makes it easy to disassemble the fermenter for cleaning, and to remove and reattach the yeast collection vessel.

The FermZilla can be used in many ways -use it as a basic gravity fermenter with the ability to dump and harvest yeast, or as a pressure fermenter and or keg with optional Spunding Valve part C71 and Pressure Kit part C77, as a chilled fermenter with an optional Temp Twister and Cooling Kit, and even as a Hop Bong Pressure Kit, with the ability to add dry hops without adding oxygen.

Includes a lid with 35 PSI PRV valve, stainless stand, airlock, 600 ml collection container with 3″ Tri Clamp lid, and Tri Clamp fittings to assemble and use the fermenter. Overall height with airlock is 34″, with a width of 14″.

 

  • William’s Brewing has this on sale for just $127.99
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter

Continue reading

FermZilla 27 Liter Tri Conical Fermenter – on sale for… $127.99 at William’s Brewing + Free Summer BBQ Package!

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The Gen 3.2 FermZilla Tri Conical features a 3” Tri-Clamp fitting to attach the dump valve, and a 2” Tri-Clamp fitting to attach the improved 3.2 yeast collection vessel. This makes it easy to disassemble the fermenter for cleaning, and to remove and reattach the yeast collection vessel.

The FermZilla can be used in many ways -use it as a basic gravity fermenter with the ability to dump and harvest yeast, or as a pressure fermenter and or keg with optional Spunding Valve part C71 and Pressure Kit part C77, as a chilled fermenter with an optional Temp Twister and Cooling Kit, and even as a Hop Bong Pressure Kit, with the ability to add dry hops without adding oxygen.

Includes a lid with 35 PSI PRV valve, stainless stand, airlock, 600 ml collection container with 3″ Tri Clamp lid, and Tri Clamp fittings to assemble and use the fermenter. Overall height with airlock is 34″, with a width of 14″.

 

  • William’s Brewing has this on sale for just $127.99
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter

FermZilla Reviews!

+ Get a FREEBIE!

  • Place an order with a subtotal of $99 or more and enter web coupon code BBQFUN at checkout and you’ll get a free summer BBQ package… high temp gloves, thermometer and flying disc.
  • No need to add the items to your cart.  Just use the coupon code and they will be automatically added at checkout.

Free Summer BBQ Package –  remember coupon code BBQFUN

Do you BBQ?  If so, check out my BBQ site… BBQ Finds

Hands on Review!

fermzilla conical fermenter review

Hands on Review: FermZilla All Rounder Fermenter

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Visit William’s Brewing – Web Only Clearance Sale

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsfermzilla tag:wms27fzconical tag:wmsbuyageta 

MoreBeer Chocolate Hazelnut Porter by Jamil Zainasheff! – All Grain and Extract – Save 20%, Limited Availability

chocolate hazelnut porter homebrew

  • MoreBeer’s Kit of the Week offers a 20% discount on a select recipe for a limited time.  Choose from all grain or extract versions while supplies last.
  • Shipping is also free to many US addresses with a qualifying $59 order
  • Custom Tap Handle: All of MoreBeer’s original recipe kits come with a full color insert that works with this custom tap handle
  • Easy Filler Item….  If you’re looking for a filler item to help you qualify for free shipping, consider grabbing some PBW

Check out this week’s Kit of the Week! – remember coupon code KOTW

Chocolate Hazelnut Porter Kits at MoreBeer


  • Our Signature Series kits offer a selection of crazy, unique beers developed by MoreBeer! customers, associates, and homebrewing legends!
  • An incredible Porter recipe that adds a kick of hazelnut extract and cacao nibs that blends beautifully with the malt profile
  • Includes Kent Goldings and Willamette hops
  • Estimated ABV: 6.5%
  • Estimated IBUs: 30-33
  • Makes 5 gallons of finished beer

Jamil brews more, consistenly high-quality beer than any hombrewer we know. He won California Homebrewer of the Year in 2002, after winning over 150 total awards at brewing competitions, 55 of them being FirstPlace. Of all the beers that he brews, the Chocolate Hazlenut Porter (CHP, as Jamil says) is the cult favorite and the recipe he is asked-for the most. It also won Best of Show 2002, several First Place ribbons, and countless other awards. It comes complete with 25 ml of Hazlenut extract and 8 oz of chocolate. Jamil recommends using California yeast, WLP001. This kit has a lot of grain in it, so you may find two grain bags useful.

  • Makes 5 gallons
  • Estimated Original Gravity: 1.064-1.068
  • SRM (Color Range): 42
  • IBUs: 30-33
  • Estimated Alcohol Percentage: 6.5%

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pst:b3kotw-kit

Kegland 500 mL PET Bottles & Caps, Case of 24 – on sale for $22.49 + free ship eligible at MoreBeer

PET Beer Bottles - 500 mL (Case of 24) B281

PET Beer Bottles – 500 mL (Case of 24) from MoreBeer


From the product description, check product page for current description, price and availability:

PET beer bottles offer a simpler solution to bottling your homebrew. Skip the labor and frustration of applying bottle caps and simply twist on the included screw caps. Made from food grade PET plastic, these bottles are amber colored and shaped to resemble a traditional beer bottle, but with a larger 16.9 oz capacity. Compared to glass bottles, these PET bottles are much safer to pack and take with you to the beach, the disc golf course, or your next backpacking excursion.

  • Food Grade PET plastic, re-useable bottles with screw caps
  • Easy to use. A great alternative to traditional glass bottles as there is no need for a capping tool
  • Lighter than glass so easier and safer to transport
  • Shaped and colored to resemble a traditional style beer bottle.
  • KegLand Item Number: KL19866

  • For a limited time MoreBeer has these marked down to $22.49.
  • Unlike a Lot of Bottle Offerings, These Do Qualify for Free Shipping!
  • Get Free Shipping: This ships for free with a qualify order as part of MoreBeer’s Free Shipping Program.  Under that promo most orders over $59 ship for free.
  • Some filler item ideas to help you qualify for free shipping… PBW, Sale Items (shows most popular deals first), Kit of the Week, Wine Kit of the Week, Hop Market (shows most popular deals first)

PET Beer Bottles – 500 mL (Case of 24) B281

Related:

Getting a Deal on Bottles for Your Homebrew

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. 9.9.21 tag:watchan Announcing: Kegland 500 mL PET Bottles & Caps now at MoreBeer

20% Off VineCo Chilean Merlot Wine Kits

MoreBeer offers 20% off select wine kits via their Wine Kit of the Week Sale. Kits change regularly and will be available while supplies last.

MoreBeer Wine Kit of the Week!  Use code WKOTW to get the deal

MoreWine, MoreBeer’s Wine specific site also has select VineCo Wine Kits on sale.

VineCo Wine of the Month Club!


MoreWine Deal on VineCo Kits

 

  • For a limited time MoreWine is discounting select wine kits. Use coupon code VINECLUB to get the discount.
  • Shipping is also free on qualifying orders to many US addresses

MoreWine Wine Kit Deal


Party Pack – Beer & Wine Deal!

MoreBeer’s Party Pack Beer and Wine Kit Bundle Deal gets you a whopping half off a wine kit when you buy a beer kit. Choose from all grain or extract. This is a great deal!

Buy A Beer Recipe Kit Get A Wine Kit 50% OFF

Continue reading

Clearance DEAL… Nitrogen Kegging System – $299, Save $100 + free shipping

Nitrogen Kegging System

Nitrogen Kegging System

More Info

From the product description, check product page for current description, price and availability:

Nitro Keg System

Start pouring smooth, creamy nitro beers in your own home! Commonly used for pouring stouts, Guinness for example, nitrogen systems create a different mouthfeel and flavor in your drink. This kit includes everything you need to start pouring delicious nitro beers, or experiment and start pouring wine, coffee, or cocktails through your draft system!

Includes:
-Nitrogen Tank (New Steel Nitrogen G-Mix Tank)
-Stout Faucet and Black Tap Handle and Faucet Wrench
-Gas & Beer Line Assemblies with MFL fittings
-Dual Gauge Nitrogen Regulator
-Chrome Plated Brass Shank 4″ X 3/16″ Bore
-Ball Lock Disconnects

 

This is marked down $100 to $299.98.

Shipping is also free to addresses in the contiguous US

Nitrogen Kegging System

Brand New 5 Gallon Gallon Ball Lock Kegs from Adventures in Homebrewing

I have this great keg.  Check out my Hands on Review

  • As of this posting, AIH has these on sale for $99.98.
  • No coupon code required.

AIH New 5 Gallon Corny Keg Ball Lock

Kegs at AIH

Our Curated List of Keg Deals

keg deals

kegdeals

Rebuild Your Homebrew Kegs!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources


homebrewing.org sale

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

More: Recent AIH Finds

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

FermZilla 27 Liter Tri Conical Fermenter – on sale for… $127.99 at William’s Brewing + Free Summer BBQ Package!

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

The Gen 3.2 FermZilla Tri Conical features a 3” Tri-Clamp fitting to attach the dump valve, and a 2” Tri-Clamp fitting to attach the improved 3.2 yeast collection vessel. This makes it easy to disassemble the fermenter for cleaning, and to remove and reattach the yeast collection vessel.

The FermZilla can be used in many ways -use it as a basic gravity fermenter with the ability to dump and harvest yeast, or as a pressure fermenter and or keg with optional Spunding Valve part C71 and Pressure Kit part C77, as a chilled fermenter with an optional Temp Twister and Cooling Kit, and even as a Hop Bong Pressure Kit, with the ability to add dry hops without adding oxygen.

Includes a lid with 35 PSI PRV valve, stainless stand, airlock, 600 ml collection container with 3″ Tri Clamp lid, and Tri Clamp fittings to assemble and use the fermenter. Overall height with airlock is 34″, with a width of 14″.

 

  • William’s Brewing has this on sale for just $127.99
  • Shipping is free or reasonably priced flat rate to addresses in the contiguous US depending on your order size for most items.

FermZilla Gen 3.2 27 Liter Tri Conical Fermenter

FermZilla Reviews!

+ Get a FREEBIE!

  • Place an order with a subtotal of $99 or more and enter web coupon code BBQFUN at checkout and you’ll get a free summer BBQ package… high temp gloves, thermometer and flying disc.
  • No need to add the items to your cart.  Just use the coupon code and they will be automatically added at checkout.

Free Summer BBQ Package –  remember coupon code BBQFUN

Do you BBQ?  If so, check out my BBQ site… BBQ Finds

Hands on Review!

fermzilla conical fermenter review

Hands on Review: FermZilla All Rounder Fermenter

More Tri-Clover/Tri-Clamp!  Tri-Clamp Fittings at Proflow Dynamics


This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Visit William’s Brewing – Web Only Clearance Sale

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:wmsfermzilla tag:wms27fzconical tag:wmsbuyageta 

Announcing: Flash Brewing Kits from MoreBeer… Brew in 10 Minutes! + Our Tips for Faster Brew Days

morebeer.com flash brewing

From MoreBeer:

Introducing MoreBeer!’s Flash Brewing Kits! Designed for both novice and seasoned homebrewers, these innovative recipe kits allow you to simply mix the ingredients with water and add yeast for fermentation. This streamlined process not only saves you valuable time but also simplifies brewing without sacrificing flavor. Say hello to a faster, easier way to craft exceptional beer at home.

Typically, brewing requires you to boil your malt and hops for one hour, followed by another hour for cooling. Flash Brewing eliminates the need to boil. Our Flash Brewing Malt recipes have been boiled and whirlpooled before they are dried. We then use a HopBite™ shot for bitterness combined with a mix of traditional hop pellets and extracts for flavor. Flash Yeast™ starts quickly and consistently produces clean beer that lets the malt and hops shine. The result is a high-quality beer that will absolutely surprise you.

Learn More About Flash Brewing!

Short On Time? Time Saving Homebrew Tips!

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:del tag:watch