Category Archives: Keg Lids

New Replacement Corny Keg Lid with Stainless Steel PRV – $16.99 + free prime ship

Gekufa Cornelius Keg Lid, Corny Keg Lid Replacement with 304 Stainless Steel Pressure Relief Valve & O-ring for Homebrew Beer Kegging, Soda Keg Lid

Gekufa Cornelius Keg Lid, Corny Keg Lid Replacement with 304 Stainless Steel Pressure Relief Valve & O-ring for Homebrew Beer Kegging, Soda Keg Lid

More Info
Highlighted Features
  • Good Sealing:With New O-ring & 304 SS Pressure Relief Valve, can hold pressure without leaks.
  • Easy to Install: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
  • More Sturdy: Made of 304 stainless steel
Learn More

 

Note from HBF: One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.

4/26 10:30 PM Central: These are selling for just $16.99. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly.  Check product page for current info – More About Prices

Gekufa Cornelius Keg Lid, Corny Keg Lid Replacement with 304 Stainless Steel Pressure Relief Valve & O-ring for Homebrew Beer Kegging, Soda Keg Lid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources
standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Stainless Steel Cornelius Keg Lid with 1.5″ Tri-Clamp Ferrule – $27.99 + Build a Corny Keg Dry Hopper!

304 stainless steel Cornelius Keg Lid with 1.5" Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper

304 stainless steel Cornelius Keg Lid with 1.5″ Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper

More Info


Highlighted Features
  • Corny Beer Keg Lid with 1.5" Tri-clamp Ferrule.
  • 1.5"TC ferrule is widely used in the homebrew products. You can find many fastic products with 1.5"TC ferrule connection.
  • Our corny beer keg lid with 1.5 inch ferrule is a great addition for the corny beer kegs.
  • More Sturdy: Made of 304 stainless steel.
  • Easy to Install & Use: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
Learn More

 

This can be used to convert a compatible Cornelius style keg to Tri-Clamp. That has a number of potential applications including using for dry hopping. See the project below for more on that.

As of this update this is selling for $27.99. Shipping is also free to many US addresses. Prices and availability can change quickly.  Check product page for current info – More About Prices

304 stainless steel Cornelius Keg Lid with 1.5″ Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Build a Dry Hopper for Cornelius Kegs!

Building a Dry Hopper for Corny Kegs – Dry Hop Under Pressure!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B0C48TM7F1:anchor

New Replacement Corny Keg Lid with Stainless Steel PRV… $13.95!

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

More Info


Highlighted Features
  • REPLACEMENT KEG LID: for ball lock and pin lock kegs
  • PRESSURE RELIEF: Built-in manual pressure relief
  • MODIFY EXISTING PIN LOCK KEG: Add a manual pressure relief to your pin lock keg
  • MODIFY EXISTING BALL LOCK KEG: Refresh your ball lock keg with a brand new lid
  • QUALITY CONSTRUCTION: Stainless steel with new O-ring
Learn More

 

Note from HBF: One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.

As of this update these are selling for just $13.95. Shipping is an additional fee. For me… I’m seeing $6.04 shipping, but that may vary based on location. The key thing is that each additional lid ships for less. As an example, if I order 5 lids shipping is $6.19. Just 5 cents more than shipping for a single lid.  Prices, promotions and availability can change quickly.  Check product page for current info – More About Prices

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B018REN9U8:ptr

Corny Keg Fermenter Lids – convert kegs to fermenters – $18.99 + free prime ship

Cornelius Keg Lid for Secondary Fermenter Include Silicone Stopper and Air Lock

Cornelius Keg Lid for Secondary Fermenter Include Silicone Stopper and Air Lock

More Info


Highlighted Features
  • A Cornelius Keg Lid for Secondary Fermenter.
  • What a great way to use your corny keg as a secondary fermenter! Simply replace your existing lid with this lid to turn your keg into a secondary fermentation vessel!
  • These lids have an approximate 7/8 inch(22mm) port hole for an airlock, bung and lid o-ring (included).
  • Will not fit Racetrack kegs.
  • These lids have an approximate 3/4"" inch port hole (may vary by 1/8"") for an airlock, bung and lid o-ring (included).
Learn More

 

These have a hole that’s designed to accommodate the included stopper and airlock.  That allows you use a Cornelius Keg as a fermenter.  Use a 5 gallon keg as a secondary for a 5 gallon batch, use a 5 gallon keg as a primary fermenter for smaller batches or use a 10 gallon Cornelius Keg as a fermenter for 5 gallon+ batches.

These should fit standard ball lock and pin lock kegs.

3/21 1 AM Central: These are selling for just $18.99. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order. Prices and availability can change quickly.  Check product page for current info – More About Prices

Cornelius Keg Lid for Secondary Fermenter Include Silicone Stopper and Air Lock  affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Related:

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Carbonate More Quickly… Ball Lock Keg Carbonation Lid and Stone… $24.86

Brewland Corny Carbonation Keg Lid, Cornelius Soda Keg Lids for Quick Forced Carbonation, Ball Lock Keg Lid with Diffusion Stone, Pressure Relief Valve, Clamp and Tube for Homebrew Beer and Beverage

Brewland Corny Carbonation Keg Lid

More Info


Highlighted Features
  • Brewland corny carbonation keg lid is perfect for quick forced carbonating and keeping a tight seal, speeding up your time on carbonating your beer or other beverage
  • The maximum pressure is 130psi, and the pressure relief valve on the keg lid will automatically relieve pressure for safety
  • This cornelius soda keg lid is made of premium stainless steel 304
  • Brewland cornelius carbonation keg lid set includes: 1pcs brand new keg lid with post and pressure relief valve, 1pcs 0.5 micron diffusion stone, 2pcs hose clamps, 1pcs PVC tube (23 inch)
  • This carbonation lid can fit cornelius keg and is widely used to carbonate beer, mead, soda, cider, juice, even seltzer water, and so on
Learn More

 

Use to help speed up carbonation, as a spare keg lid, for testing, dialing in inline regulators and more. Photo of a similar lid being used with my Spunding Valve.

3/12 8 AM Central: This is selling for just $24.86. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying order.  Prices, promotions and availability can change quickly.  Check product page for current info – More About Prices

Brewland Corny Carbonation Keg Lid, Cornelius Soda Keg Lids for Quick Forced Carbonation, Ball Lock Keg Lid with Diffusion Stone, Pressure Relief Valve, Clamp and Tube for Homebrew Beer and Beverage – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: at MoreBeer – similar function but not identical

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Brand New Replacement Keg Lids… $12.95 + Great Deals on Kegs

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

More Info

From the product description, check product page for current description, price and availability:

Yep, a new keg lid with built-in pressure relief for Cornelius-style pin lock OR ball lock kegs!

Imagine that. Pin lock users get manual pressure relief without buying a whole new keg. Ball lock folks get a great replacement lid.

So go ahead … add a little pressure relief to your ball lock or pin lock keg with our new Corny lid. If you’re still working without a pull pressure relief – maybe pushing something into the liquid connection to relieve the pressure – it’s really time to upgrade.

One high-quality stainless steel keg lid for Cornelius-style kegs with built-in manual pull pressure relief and new O-ring.

 

In most cases, Pin lock and ball lock cornelius style keg lids are interchangeable from a size perspective.  That means you can, generally speaking, put a pepsi/ball lock style (manual prv) lid on a coke/pin lock style (no manual prv) keg.  In my book, that’s a solid upgrade.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

As of this update Beverage Elements has these for just $12.95. That’s a bargain!

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

Great Kegs Deals at Beverage Elements!

Related:  Fix It! Bulk Keg Orings and Keg Repair Part Numbers

keg deals

kegdeals

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:lnksfxd rpu:keglid:rpu

Brand New Replacement Keg Lids… $12.95!

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

More Info

From the product description, check product page for current description, price and availability:

Yep, a new keg lid with built-in pressure relief for Cornelius-style pin lock OR ball lock kegs!

Imagine that. Pin lock users get manual pressure relief without buying a whole new keg. Ball lock folks get a great replacement lid.

So go ahead … add a little pressure relief to your ball lock or pin lock keg with our new Corny lid. If you’re still working without a pull pressure relief – maybe pushing something into the liquid connection to relieve the pressure – it’s really time to upgrade.

One high-quality stainless steel keg lid for Cornelius-style kegs with built-in manual pull pressure relief and new O-ring.

 

In most cases, Pin lock and ball lock cornelius style keg lids are interchangeable from a size perspective.  That means you can, generally speaking, put a pepsi/ball lock style (manual prv) lid on a coke/pin lock style (no manual prv) keg.  In my book, that’s a solid upgrade.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

As of this update Beverage Elements has these for just $12.95. That’s a bargain!

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

Great Kegs Deals at Beverage Elements!

Related:  Fix It! Bulk Keg Orings and Keg Repair Part Numbers

keg deals

kegdeals

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:lnksfxd rpu:keglid:rpu

Stainless Steel Cornelius Keg Lid with 1.5″ Tri-Clamp Ferrule + Build a Corny Keg Dry Hopper!

304 stainless steel Cornelius Keg Lid with 1.5" Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper

304 stainless steel Cornelius Keg Lid with 1.5″ Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper

More Info


Highlighted Features
  • Corny Beer Keg Lid with 1.5" Tri-clamp Ferrule.
  • 1.5"TC ferrule is widely used in the homebrew products. You can find many fastic products with 1.5"TC ferrule connection.
  • Our corny beer keg lid with 1.5 inch ferrule is a great addition for the corny beer kegs.
  • More Sturdy: Made of 304 stainless steel.
  • Easy to Install & Use: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
Learn More

 

This can be used to convert a compatible Cornelius style keg to Tri-Clamp. That has a number of potential applications including using for dry hopping. See the project below for more on that.

304 stainless steel Cornelius Keg Lid with 1.5″ Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Build a Dry Hopper for Cornelius Kegs!

Building a Dry Hopper for Corny Kegs – Dry Hop Under Pressure!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B0C48TM7F1:ptr

Brand New Replacement Keg Lids… $12.95!

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

More Info

From the product description, check product page for current description, price and availability:

Yep, a new keg lid with built-in pressure relief for Cornelius-style pin lock OR ball lock kegs!

Imagine that. Pin lock users get manual pressure relief without buying a whole new keg. Ball lock folks get a great replacement lid.

So go ahead … add a little pressure relief to your ball lock or pin lock keg with our new Corny lid. If you’re still working without a pull pressure relief – maybe pushing something into the liquid connection to relieve the pressure – it’s really time to upgrade.

One high-quality stainless steel keg lid for Cornelius-style kegs with built-in manual pull pressure relief and new O-ring.

 

In most cases, Pin lock and ball lock cornelius style keg lids are interchangeable from a size perspective.  That means you can, generally speaking, put a pepsi/ball lock style (manual prv) lid on a coke/pin lock style (no manual prv) keg.  In my book, that’s a solid upgrade.  See: What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?

As of this update Beverage Elements has these for just $12.95. That’s a bargain!

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

Great Kegs Deals at Beverage Elements!

Related:  Fix It! Bulk Keg Orings and Keg Repair Part Numbers

keg deals

kegdeals

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

pinned

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

greatdeals

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. tag:lnksfxd rp:keglid:rp

New Replacement Corny Keg Lid with Stainless Steel PRV

Gekufa Cornelius Keg Lid, Corny Keg Lid Replacement with 304 Stainless Steel Pressure Relief Valve & O-ring for Homebrew Beer Kegging, Soda Keg Lid

Gekufa Cornelius Keg Lid, Corny Keg Lid Replacement with 304 Stainless Steel Pressure Relief Valve & O-ring for Homebrew Beer Kegging, Soda Keg Lid

More Info


Highlighted Features
  • Good Sealing:With New O-ring & 304 SS Pressure Relief Valve, can hold pressure without leaks.
  • Easy to Install: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
  • More Sturdy: Made of 304 stainless steel
Learn More

 

Note from HBF: One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.

Gekufa Cornelius Keg Lid, Corny Keg Lid Replacement with 304 Stainless Steel Pressure Relief Valve & O-ring for Homebrew Beer Kegging, Soda Keg Lid – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Oversize Keg Lid O-Ring – for leaky lids + Save via Sitewide Sale

Updated: December 8, 2024

Oversize Keg Lid O-Ring from William’s Brewing.

About, from William’s: “Unlike standard lid O rings which have a .280″ cross section, our exclusive Oversize O Ring has a slightly larger (.310”) diameter, and is molded from softer rubber, for a more positive seal at low dispensing pressures. An ideal fix for an older keg with a leaky lid, or for any keg that needs to be pressurized before filling to achieve an airtight seal. Fits all brands of kegs, pin-lock or ball-lock, with a 3 by 3.5” clamp down oval lid. “

Continue reading →

New Replacement Corny Keg Lids

304 stainless steel Cornelius Keg Lid, New Replacement Corny Keg (Soda Keg) Lid Stainless Steel Beer Barrels Lid with SS Pressure Relief Valve & New O-ring for Cornelius (Replacement Keg Lid)

304 stainless steel Cornelius Keg Lid, New Replacement Corny Keg (Soda Keg) Lid Stainless Steel Beer Barrels Lid with SS Pressure Relief Valve & New O-ring for Cornelius (Replacement Keg Lid)

More Info


Highlighted Features
  • More Sturdy: Made of 304 stainless steel
  • Sealed Perfect: With New O-ring & 304 SS Pressure Relief Valve, can hold pressure without leaks.
  • Easy to Install & Use: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
  • Quality Guarantee: All keg lids are tested before delivery to ensure performance and reliability.
  • After-sales Satisfaction: one-year warranty, lifetime maintenance (not including O-rings)
Learn More

 

Note from HBF: One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.

304 stainless steel Cornelius Keg Lid, New Replacement Corny Keg (Soda Keg) Lid Stainless Steel Beer Barrels Lid with SS Pressure Relief Valve & New O-ring for Cornelius (Replacement Keg Lid) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

New Replacement Corny Keg Lid with Stainless Steel PRV… $13.95!

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

More Info


Highlighted Features
  • REPLACEMENT KEG LID: for ball lock and pin lock kegs
  • PRESSURE RELIEF: Built-in manual pressure relief
  • MODIFY EXISTING PIN LOCK KEG: Add a manual pressure relief to your pin lock keg
  • MODIFY EXISTING BALL LOCK KEG: Refresh your ball lock keg with a brand new lid
  • QUALITY CONSTRUCTION: Stainless steel with new O-ring
Learn More

 

Note from HBF: One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.

As of this update these are selling for just $13.95. Shipping is an additional fee. For me… I’m seeing $6.04 shipping, but that may vary based on location. The key thing is that each additional lid ships for less. As an example, if I order 5 lids shipping is $6.19. Just 5 cents more than shipping for a single lid.  Prices, promotions and availability can change quickly.  Check product page for current info – More About Prices

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B018REN9U8:anchor

New Replacement Corny Keg Lid with Stainless Steel PRV

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock

More Info


Highlighted Features
  • REPLACEMENT KEG LID: for ball lock and pin lock kegs
  • PRESSURE RELIEF: Built-in manual pressure relief
  • MODIFY EXISTING PIN LOCK KEG: Add a manual pressure relief to your pin lock keg
  • MODIFY EXISTING BALL LOCK KEG: Refresh your ball lock keg with a brand new lid
  • QUALITY CONSTRUCTION: Stainless steel with new O-ring
Learn More

 

Note from HBF: One difference between Pin Lock and Ball Lock kegs is the type of lids that come with each.  Ball Locks, generally, have a manual PRV valve, while Pin Locks do not.  Ball Lock style lids are, in my opinion, superior because the manual PRV allows you to easily vent your keg as needed.  The good news is that, for standard kegs, the lids are the same size and can be interchanged.  That means you can use a Ball Lock style lid in a Pin Lock Keg.

Keg Lid with Built-In Pressure Relief – Pin Lock or Ball Lock – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B018REN9U8:ptr

FREE Top Draw Corny Keg Lid from William’s Brewing

Top Draw Corny Keg Lid

Top Draw Corny Keg Lid via William’s Brewing

More Info

From the product description, check product page for current description, price and availability:

Do you want to drink the clearest beer possible from your keg as quickly as possible? The Top Draw® Keg Lid Beer Pick Up Tube fits any homebrew keg with an oval lid, and includes a beer ball lock with a Top Draw Beer Pick Up Tube in the lid. As the level of the beer in the keg drops, the pick up tube remains 1″ below the surface, always drawing the clearest beer all the way until empty. The stainless float ball itself is 1.75″ in diameter.

Installs in a few seconds – just switch out keg lids. For shorter kegs, cut the silicone tube to length.

Includes 22″ of tubing, 304 grade stainless float with attached pickup tube, and oval keg lid with both a pressure relief valve, and a beer ball lock fitting welded into the center.

 

Top Draw Corny Keg Lid

Get One FREE w/Qualifying Order!

  • Use coupon code X05 with an order of $89.99 or more and you’ll get one for free.
  • No need to add it to your cart.  Just use the coupon code at checkout.

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

Visit William’s Brewing – Web Only Clearance Sale

williams

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Carbonation Lid for Keg… $14.99! w/HALF OFF Coupon

Carbonation Lid for Keg

Carbonation Lid for Keg

More Info

From the product description, check product page for current description, price and availability:

Easily carbonate your next batch in 24 hours! This Cornelius keg lid features a top mounted gas ball lock post with an under-mounted 5/16 barbed post for use with 1/4″ ID tubing.

Recommended accessories:

carb stone
1/4″ tubing

 

Use to help speed up carbonation, as a spare keg lid, for testing, dialing in inline regulators and more. Photo of a similar lid being used with my Spunding Valve.

 

Carbonation Lid for Keg

Get HALF OFF!

homebrewing.org clearance sale

As of this posting, coupon code SLASH50 takes 50% off select gear and supplies at AIH. All sales final

Clearance Sale – remember promo code SLASH50



Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

aih

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Hands on Review: Kegland Hang Tab Keg Lids – works on ball lock & pin lock kegs

Kegland, based in Australia, produces a broad array of homebrewing gear. fermenters, electric brewing systems, loads of draft stuff (including DuoTight!) and lots more.

It’s obvious these folks are homebrewers at heart, because they’ve come up some really innovative stuff. The other thing they’ve generally done is hit really good price points. There is a balance between cost, features and quality and they seem to be hitting a lot of bullseyes.

This is a hands on look at their unique keg lid with integrated hang tag model KL02868.

Close of up of the lid. Reads… Caution Release Pressure to Remove Lid. Maximum Working Pressure 130 PSI.

Check Current Prices and Availability:

Continue reading →

Stainless Steel Cornelius Keg Lid with 1.5″ Tri-Clamp Ferrule + Build a Corny Keg Dry Hopper!

Corny Keg Lid, Oval Ball Lock Keg Attachment, Cornelius Tri-Clamp Keg Lid with 1.5" TC Ferrule, Attach Dry Hopper, Stainless Steel Sanitary Fitting, for Homebrew, Beer Kegging, Dry-Hopping

Corny Keg Lid, Oval Ball Lock Keg Attachment, Cornelius Tri-Clamp Keg Lid with 1.5″ TC Ferrule, Attach Dry Hopper, Stainless Steel Sanitary Fitting, for Homebrew, Beer Kegging, Dry-Hopping

More Info


Highlighted Features
  • 🍺Perfect for brewing and dry-hopping: Use the 1.5" TC ferrule of this oval keg fitting as a port, for example, to easily add hops to secondary fermentation by connecting a dry hopper. The welded flange also allows for the attachment of other TC fittings like elbow tubes, sight windows, or clamp tees – take your homebrewing setup to the next level!
  • 🍺Fits Corny kegs snugly: Made of 304 stainless steel and equipped with a strong, thick silicone gasket, this replacement lid fits snugly onto any kind of homebrew, ball lock, or soda keg that boasts an oval opening.
  • 🍺Easy installation: Installing this replacement cap is as easy as drinking beer: Simply slide the Cornelius keg lid into the opening of your beer or soda keg and push down the lid clamp – no screwdriver or wrench necessary.
  • 🍺Avoid excess pressure: For your safety and to avoid excess pressure, this keg cover comes with an integrated pressure relief valve. Simply pull out the valve ring and the gas inside the keg will escape immediately. Also, if the pressure exceeds 60 PSI the valve will release gas automatically.
  • 🍺Get a spare O-ring: It is common for gaskets to get damaged after a while due to the constant pressure they are under. Thankfully, this set includes a spare tri-clamp silicone washer which you can use as a replacement to prevent any leaks around your TC connections.
Learn More

 

This can be used to convert a compatible Cornelius style keg to Tri-Clamp. That has a number of potential applications including using for dry hopping. See the project below for more on that.

BIERKRONE Corny Keg Lid, Oval Ball Lock Keg Attachment, Cornelius Tri-Clamp Keg Lid with 1.5″ TC Ferrule, Attach Dry Hopper, Stainless Steel Sanitary Fitting, for Homebrew, Beer Kegging, Dry-Hopping – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Build a Dry Hopper for Cornelius Kegs!

Building a Dry Hopper for Corny Kegs – Dry Hop Under Pressure!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Stainless Steel Cornelius Keg Lid with 1.5″ Tri-Clamp Ferrule + Build a Corny Keg Dry Hopper!

304 stainless steel Cornelius Keg Lid with 1.5" Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper

304 stainless steel Cornelius Keg Lid with 1.5″ Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper

More Info


Highlighted Features
  • Corny Beer Keg Lid with 1.5" Tri-clamp Ferrule.
  • 1.5"TC ferrule is widely used in the homebrew products. You can find many fastic products with 1.5"TC ferrule connection.
  • Our corny beer keg lid with 1.5 inch ferrule is a great addition for the corny beer kegs.
  • More Sturdy: Made of 304 stainless steel.
  • Easy to Install & Use: Large handle makes installation easier; labor-saving design of safety relief valve, no need to keep lifting when deflated, just lift once and rotate 90° to continuously deflate.
Learn More

 

This can be used to convert a compatible Cornelius style keg to Tri-Clamp. That has a number of potential applications including using for dry hopping. See the project below for more on that.

304 stainless steel Cornelius Keg Lid with 1.5″ Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Build a Dry Hopper for Cornelius Kegs!

Building a Dry Hopper for Corny Kegs – Dry Hop Under Pressure!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability. ssprod:B0C48TM7F1:ptr

Stainless Steel Cornelius Keg Lid with 1.5″ Tri-Clamp Ferrule + Build a Corny Keg Dry Hopper!

BIERKRONE Corny Keg Lid, Oval Ball Lock Keg Attachment, Cornelius Tri-Clamp Keg Lid with 1.5" TC Ferrule, Attach Dry Hopper, Stainless Steel Sanitary Fitting, for Homebrew, Beer Kegging, Dry-Hopping

BIERKRONE Corny Keg Lid, Oval Ball Lock Keg Attachment, Cornelius Tri-Clamp Keg Lid with 1.5″ TC Ferrule, Attach Dry Hopper, Stainless Steel Sanitary Fitting, for Homebrew, Beer Kegging, Dry-Hopping

More Info


Highlighted Features
  • 🍺Perfect for brewing and dry-hopping: Use the 1.5" TC ferrule of this oval keg fitting as a port, for example, to easily add hops to secondary fermentation by connecting a dry hopper. The welded flange also allows for the attachment of other TC fittings like elbow tubes, sight windows, or clamp tees – take your homebrewing setup to the next level!
  • 🍺Fits Corny kegs snugly: Made of 304 stainless steel and equipped with a strong, thick silicone gasket, this replacement lid fits snugly onto any kind of homebrew, ball lock, or soda keg that boasts an oval opening.
  • 🍺Easy installation: Installing this replacement cap is as easy as drinking beer: Simply slide the Cornelius keg lid into the opening of your beer or soda keg and push down the lid clamp – no screwdriver or wrench necessary.
  • 🍺Avoid excess pressure: For your safety and to avoid excess pressure, this keg cover comes with an integrated pressure relief valve. Simply pull out the valve ring and the gas inside the keg will escape immediately. Also, if the pressure exceeds 60 PSI the valve will release gas automatically.
  • 🍺Get a spare O-ring: It is common for gaskets to get damaged after a while due to the constant pressure they are under. Thankfully, this set includes a spare tri-clamp silicone washer which you can use as a replacement to prevent any leaks around your TC connections.
Learn More

 

This can be used to convert a compatible Cornelius style keg to Tri-Clamp. That has a number of potential applications including using for dry hopping. See the project below for more on that.

BIERKRONE Corny Keg Lid, Oval Ball Lock Keg Attachment, Cornelius Tri-Clamp Keg Lid with 1.5″ TC Ferrule, Attach Dry Hopper, Stainless Steel Sanitary Fitting, for Homebrew, Beer Kegging, Dry-Hopping  – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Also Consider: 304 stainless steel Cornelius Keg Lid with 1.5″ Tri-clamp Ferrule,NEW Corny Beer Keg Lid 60PSI PRV Food Grade Dry Hopper – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link

Build a Dry Hopper for Cornelius Kegs!

Building a Dry Hopper for Corny Kegs – Dry Hop Under Pressure!


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Check our our Top Draft Related Resources

standarddraft

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

pinned

amazon

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.