boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary (528 GHP, 35W)More Info
From the product description, check product page for current description, price and availability:
- A multi-functional Submersible pump=Add water+Change water+Circulating water+Sucking fish manure. Equipped with 2 water outlets and 5.6 Ft power cord, can be applied in aquarium, fountains, hydroponic and pond
- Water pump with bottom suction trainer,100% submersible.The pump motor is sealed with high-quality resin and has better insulation performance, which can effectively prevent Water leakage and Electric leakage
- Max Flow Rate: 528 GPH per hour, Max Lift height: up to 5.9 Feet. 35W high efficiency motor for energy saving, and low water level design
- This submersible water pump is multi-purpose water pump with low power consumption, low noise, balanced speed, reliable operation, long service life, easy to maintain
From HBF: Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
boxtech Submersible Water Pump, Aquarium Water Pump, Fountain Pump, 25W/ 35W/ 45W/60W Ultra Quiet Water Pump for Fish Tank, Aquarium, Pond, Fountain, Hydroponics and Statuary (528 GHP, 35W) – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link
Our Line Cleaning Builds:
- Build A Recirculating Draft Line Cleaning Pump
- Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion
- Building a Simple Ball Lock Draft Line Flushing Setup
Stainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs. Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post
This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!