The Most Difficult Spot to Check for CO2 Leaks

hard to find keg co2 leak

If you’ve found this article odds are pretty good you’re having trouble tracking down a pesky leaks.


I recommend changing o-rings when Daylight Savings Time Ends

How Often Should You Replace Keg O-Rings? – A Proposed Schedule for Keeping Kegs in Great Shape


Check for CO2 Leaks

First things first, if you haven’t already used traditional methods to try to track down your leak, check out my resources on the topic.

The Most Difficult Spot to Check for CO2 Leaks…

Even a small leak can cause your beer to carbonate slowly (or not at all) and lead to… empty CO2 tanks. That’s a waste of time and money and it’s frustrating.

Color coded post o-rings. From our Keg Rebuild Post – Jump To: Replace O-Rings

In my opinion the most difficult spot to check and the cause of many a lost CO2 tanks are… gas post o-rings.

Testing at this point using the “spray bottle method” (spray Star San everywhere and check for bubbles) is impossible or at the very least difficult and messy.  Leaks will only surface here when a gas QD is actually engaged.  The problem is, you can’t easily see that spot when a QD is on.

The problem stated more simply… You need a QD on to see if it’s leaking, but you can’t see it if a QD is on. You can use what I call the pressure gauge method to check for overall leaks. But even using that method you know that you have a leak but it gives no indication where it’s at.

Be quick to replace gas side o-rings… I’m quick to replace gas post (and gas dip tube) o-rings. Beyond slow and no-carbing beers, a bad gas side o-ring can lead to empty tanks. That’s a waste of time and money and it’s frustrating.

These o-rings cost pennies each when you buy them in bulk. Liberally replacing these can save time, money and frustration.

Related:

Color Coded Post O-Rings for Easy Identification:

Valuebrew carries two color schemes to color keg posts. Doing this allows you to quickly identify keg posts. Gray and Black match standard keg QD colors. Blue and Green are meant to be remembered by “Blue for Beer” and “Green for Gas”. All options are made from FDA rated silicone. Since they work equally well on gas and liquid posts you can also mix and match to come up with your own color coding standard.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

More Homebrew Finds!

This is a Top Post! See: All Top Posts

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. tag:lnksfxd toppost:diffco2leak tag:tpr

Leave a Reply