Ball Lock Keg Carbonation Lid – $19.95

Ball Lock Keg Carbonation Lid

More Info
Highlighted Features
  • Our keg lid is set up to accept a standard ball lock disconnect.
  • To carbonate, apply CO2 through the lid as shipped at 45 PSI for about 24 hours.
  • Or to fast carbonate in less than an hour, add a piece of clear tubing long enough to place an aeration stone at the bottom of your keg.
  • The metal parts of our keg lids are 100% 304 Stainless Steel and the gasket seal is food safe neoprene.
  • Widely used to carbonate beer, soda, juice, water and even sparkling water. Fits to all ball lock and pin lock homebrew corny kegs that use a standard oval lid and can also be used as a regular lid when not fast carbonating.
  • Does not include tubing or air stone.

Use to assist in force carbonating your homebrew.

Use to help speed up carbonation, as a spare keg lid, for testing, dialing in inline regulators and more. Photo of a similar lid being used with my Spunding Valve.

8/2 11:30 PM Central: These are selling for just $19.95. Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying orderPrices and availability can change quickly.  Check product page for current info – More About Prices

Stainless Steel 304 Forced Carbonation Oval Cornelius Keg Lid for Soda or Homebrew Beer– note that multiple variations of this product may be available, as such a different version may appear at this link

Compare: at MoreBeer – similar function but not identical

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

Leave a Reply