How Long Does Star San Last?

cln_img_0525

Star San is my sanitizer of choice.  It’s food safe and no rinse.  Required contact time is five mintues.  It has worked very well for me for quite some time and I’m convinced that it’s one of the most economical solutions available if you use the spray bottle method. See: Star San Tips, Tricks and Guidelines

How Long Does Star San Last?

With regards to mixed Star San Solution: The official answer is probably… you should mix a fresh batch each time you use it.  To really test the effectiveness, you need to titrate the solution and test the PPM.

Practically speaking, many homebrewers use and re-use Star San.  If you’re going to do that, the solution should be relatively clear and the mixture should have a pH of under 3.5.  Previously the recommendation I received from Five Star Chemicals was that the solution should by crystal clear, however, for bottles of Star San not older than 1 year (check the manufacture date on the bottle, the first two digits are the year it was manufactured) crystal clarity isn’t necessarily a requirement.

From “Better Safe Than Sorry” Department: If you doubt a mixture it’s better to be safe, dump it and make a fresh batch


This article contains affiliate links. We may make a small percentage if you use our links to make a purchase. You won’t pay more and you’ll be supporting Homebrew Finds and more content like this. Thank you for your support!



Related:

The pH strips featured in this write up:

pHydrion 9200 Plastic pH Indicator Strips, 0.0 to 6.0, flip top Vial Packaging

Get Star San:


More About Clarity

Years ago, I received this information from Five Star Chemicals:  “The cloudy solution could be okay, but it could be bad. The cloudiness is the surfactant coming out of solution. It has reacted, or is reacting with the metals in the water. I don’t know if it is still good, because I don’t know how much surfactant has reacted. I error on the side of caution and suggest that you don’t even mess with it. Use DI water.

Previously testing the effectiveness of diluted Star San involved two things… Crystal clear solution and pH under 3.5.

As of this update on 9/2018, clarity is not considered an issue – via Emily Lovato at Five Star Chemicals

My personal opinion (not official) is that crystal clear Star San is preferable to cloudy Star San.  If you have hard water and your diluted Star San mixture immediately turns cloudy, and you want it to be clear, you can use RO or distilled water.



Star San Shelf Life

With regards to Star San concentrate: Five Star Chemicals recommends replacing bottles of Star San concentrate that are over 2 years old.  – via Emily Lovato at Five Star Chemicals.

What size to buy?  Because of the 1 or 2 year freshness recommendation via Five Star, my recommendation to most homebrewers is to purchase the smaller 8 oz bottle of Star San.  If you’re using the spray bottle method [See: Star San Tips, Tricks and Guidelines] 8 ounces of Star San should last many homebrewers for at least a year.  My reasoning on the 8 oz recommendation is… why buy a larger bottle that you won’t be able to get through before it needs to be replaced?  There’s a calculator in my tips post to help you estimate your usage.

Testing pH of your diluted Star San Mixture…

Testing pH question involves using either a pH meter or strips.  The pH meter option is straightforward [See: Amazon’s Best Sellers in Lab pH Meters].  pH Meters can be costly and do require calibration, maintenance and, eventually, replacement.  Because of that, I wanted to find pH strips that work well for this task.  I ended up trying a few different styles and manufacturers before finding strips that I think work well.

cln_img_0509I settled on Hydrion Pro 9200 (0.0 to 6) pH Indicator Strips – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this linkcln_img_0510I wanted something easy to read and use that featured a color chart reading right at 3.5 pH.  Here is the scale for these strips.  It shows .5 pH increments from 0.0 to 6.0.cln_img_0512Directions: Immerse plastic strip in test solution.  remove strip and immediately match the color chart for accurate pH measurement.  These are also made in the USA.cln_img_0514The container features a flip top cap for easy access and storage.  These strips are a bit stiff so that are easy to stick in solution and read.  You get 100 strips.  If you wanted to, you could probably trim these strips in half to make them last longer.cln_img_0518I poured some Star San Solution from my go-to sprayer [Chemical Guys ACC130 Chemical Resistant Heavy Duty Bottle and Sprayer – Review] for testing.  I’m using an SEOH Weigh Boat to hold the sample.cln_img_0525Results: The Star San Solution should be more yellow/orange than the yellow/green that’s shown for pH 3.5.  Anything that’s more yellow, orange or red indicates a good pH reading.  I would say this strip shows a good reading somewhere between 2.5 and 3.

This is a straightforward thing to do.  The biggest trick is finding pH indicator strips that work well, have a test point at 3.5 pH and are easy to read.  Hydrion Pro pH Strips catalog #9200 fit the bill.

The pH strips featured in this write up:

pHydrion 9200 Plastic pH Indicator Strips, 0.0 to 6.0, flip top Vial Packaging



Get Star San:

Star San Tips & Tricks!

More Homebrew Finds!

Recent Deals!

10 Most Recent Homebrew Resource Posts & How-To’s!

We are Homebrew Review HQ!  Our 10 Most Recent Reviews

Let’s Be Friends!

Subscribe To Our Email!8 Ways to Connect with HBF

Quick Catch-Ups

Top Content

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

This is a Top Post! See: All Top Posts

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. tag:lnksfxd toppost:starsanph rs:7 tag:tpr

6 thoughts on “How Long Does Star San Last?

  1. John

    Not to change the subject of using a ph strip to test StarSan but can someone please tell me how long StarSan will last in a plastic bucket before it ruins the bucket? I have heard that it does something to break down the plastic bucket. Anyone know about this? Thanks, John

    Reply
    1. KSinger

      I’ve kept StarSan (diluted) in a donut glaze bucket for 3+ months without any damage that I could see or feel.

      Reply
    2. Mike Lee

      I put a gamma seal lid on a 6.5 gallon brew bucket and dedicated it to holding mixed Star San over a year ago…I see no issues with the bucket or the valve that I frequently run the chemical through

      Reply
    3. JL

      More likely the residue is from using water with a high mineral content. Most tap water has a significant mineral content which can make the solution cloudy. Especially if you let the solution sit for a while. The cloudiness can leave a residue on anything you leave sitting in the solution. So you would notice it is you left say a plastic spoon in the bucket. It’s all harmless. It’s not the plastic breaking down. In fact most people mix a small amount of Star San and put it in a spray bottle for long periods of time to make it last longer. The best advice if you are going to store a mixture of the solution for a period of time is to mix it with distilled water.

      Reply

Leave a Reply