840 GPH! Utility Pump by FREESEA + Draft Line Cleaning Builds

FREESEA 160-1100 GPH Submersible Water Pump for Pond, Aquarium, Hydroponics, Fish Tank Fountain

FREESEA 160-1100 GPH Submersible Water Pump for Pond, Aquarium, Hydroponics, Fish Tank Fountain

More Info

From the product description, check product page for current description, price and availability:

  • Smart control, dry running automaticly cut power.(Principle:Dry running opreation will increase motor temperature, then the pump will automatically shut down, but the motor will restart working after the temperature goes down. Therefore, when the motor automatically turned off we need to cut off power immediately. This function can effectively reduce the damage caused by dry running.)
  • With bottom suction trainer,100% submersible.
  • Maximum flow rate: 840 GPH STRONG POWER and HIGH LIFT. Max Lift Height: 9.2 ft. 60W high efficiency motor for energy saving.
  • Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed securely and tightly) SUCTION CUP and 5.9Ft POWER CORD. Long enough cord for easy installation.

From HBF: Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

 

I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup.  Note that fittings sizes are different on this pump vs the one I use in that build.  Adjust accordingly  Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.

FREESEA 160-1100 GPH Submersible Water Pump for Pond, Aquarium, Hydroponics, Fish Tank Fountain affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Leave a Reply