From the product description, check product page for current description, price and availability:

• Designed by Homebrewers for Homebrewers
• Wide 26° to 82° F Range
• Holds four Cornelius style homebrew kegs (8½” diameter)
• Holds three 1/6 Barrel Commercial Sankey Kegs (9 3/16″ diameter)
• Forward Seal Stainless Intertap Faucets with all tower options
• Easy to connect Duotight fittings included with all towers
• Tower Cooling Fan with front panel switch
• Converts to a Fermentation Chamber and includes a wire shelf
• Removable Drip Tray for Easy Cleaning
• Approved For Commercial Use
• One Year Warranty (and we stock all vital spare parts in case you need them after the warranty period)

Cold does not rise. You will find that a beer tower elevated above a refrigerator will always remain warmer than the refrigerator, resulting in initial pours from the kegerator that are warm and foamy, followed by colder pours once you have dispensed a beer or two. At home this is a real problem, unless you pour beers in quick succession. This is the only kegerator to include a tower cooling fan as standard equipment, and also feature a fan on/off switch on the front digital control panel.

The beauty of the KegLand Series X is the extended range thermostat included. Unlike kegerators with standard 30° to 50° temperature ranges, the Series X can be adjusted easily with the front panel digital display from 26° to 82° F (ambient temperature permitting), which means you can also use your kegerator as a fermentation chamber for ales in summer, a small refrigerator for food items, or even a wine cellar. Keep in mind the unit only cools, and does not heat, and a temperature of say 65 degrees F. is only possible if the temperature outside the kegerator is 65 degrees or warmer.

The drip tray rests on top of the unit, and can be removed for easy cleaning. This simple two piece design cleans up quick in your sink, and eliminates the need to clean a sticky drip tray on the unit.

Included with all models are a a C02 bottle mounting bracket,and integral tower cooling fan. You will need to provide a flat bottom 5 pound C02 cylinder (available at welding supply stores and fire extingisher serice firms). You select the beer tower/faucet option that is right for you, and a free KegLand MK4 Dual Gauge Regulator is included.

Setup is easy with Duotight connections included for everything from the faucet shanks to the included regulator. These make it easy to connect and disconnect gas and beer lines, and eliminate the need for hose clamps. As noted below, you will need additional parts depending on how many faucets you get, and if you want to dispense home brew or a commercial keg.

Important Installation Note: Series X kegerators need 4″ of clearance on both sides and the back of the unit when installing so they do not overheat. This model cannot be installed flush into a countertop with no side clearance like a dishwasher. The side walls have radiators inside that dissipate heat, and they cannot be blocked.

Note: The Four Faucet Tower option should only be ordered if you are dispensing home brew kegs, as this unit only holds three five gallon sankey commercial kegs.

Needed but not included for each ball lock home brew keg supplied faucet in your tower:
1 B11 Threaded Gas Ball Lock
1 B12 Threaded Beer Ball Lock
2 Z93 Duotight Flare Adapters

For example, if you buy a Triple Tower and plan on dispensing three ball lock kegs, you will need:
3 B11 Threaded Gas Ball Locks
3 B12 Threaded Beer Ball Locks
6 Z93 Duotight Flare Adapters

Needed but not included for each Sankey commercial beer keg supplied faucet in your tower:
1 C34 Stainless Sankey Coupler with relief valve

For example, if you buy a Double Faucet Tower and plan on dispensing two commercial kegs, you will need:
2 C34 Sankey Couplers

Outside Dimensions:

24″ wide
25″ deep, 31″ with C02 Bottle Mounted on back
33.5″ tall (just the box, no drip tray, caster wheels, tower, or chrome guard rail)
36″ tall (with caster wheels but no drip tray, tower, or chrome guard rail)
52″ tall with caster wheels and tower

Internal Dimensions:
19.5″ wide
16″ deep
28.25″ tall

Power Consumption:
.09 Amps

The Kegs Below Will Fit Inside

Homebrew:
5 Gallon 8½” diameter Ball Lock or Pin Lock Cornelius Keg – 4 ( or 2 Ball Lock and one 1/6 barrel Sankey keg)
2.5 Gallon 8½” diameter Cornelius Keg – 4
5 Gallon 9¼” diameter Cornelius Ball or Pin Lock Keg – 3

Commercial Kegs:
5.16 Gallon Sixth Barrel – 3
7¾ Gallon any type – 1
15½ Gallon – 1

Note: The All Rounder Fermzilla will fit, although the 27 Liter Fermzilla with valve is too tall to fit.

Depending on your location, this ships via GSO or by Truck signature required. Please provide a good phone number when ordering, as the delivery company may need to call you to schedule delivery.

---

• Rebuilding & Reconditioning Homebrew Kegs!
• Five Benefits of Using Corny Kegs As Fermenters
• Food Safe Replacement Keg O-Rings in Bulk
• Hands on Review: Kegland DuoTight Fittings & EVABarrier Tubing!
• Why Won’t My Homebrew Carbonate? Fixing Beer Carbonation Problems
• Kegerator Foam Problems? – Fight the First Foamy Pint!
• Upgrade Your Kegerator – 6 Improvements!
• Serve Homebrew on Any Kegerator & Convert Commercial Kegerator to Homebrew
• Tips and Gear for Growler Filling
• What’s the Difference Between Ball Lock Kegs and Pin Lock Kegs?
• Checking for Draft System CO2 Leaks – Using The Pressure Gauge Method
• Tip: Consider Oetiker Stepless Clamps for Kegerator Gas and Beer Lines
• Hands On Review: Inkbird ITC-308 Dual Stage Temperature Controller +WiFi Version
• Universal Poppets Tips and Tricks!
• Convert Your Mark II Keg & Carboy Washer to a Recirculating Draft Line Clea…
• Step by Step: Finding and Fixing Keg CO2 Leaks
• Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan
• Kegging CO2 Use Estimations and Calculations
• Step by Step: Balancing Your Kegerator Draft System
• Building a Simple Ball Lock Draft Line Flushing Setup
• Build a Recirculating Draft Line Cleaning Pump
• Home Brew Keg Roundup – New & Used, 5 and 2.5 Gallon & More!
• Damp Kegerator? Fix Kegerator Condensation
• Portable Draft Beer Serving Options!
• Homebrew Temp Controller Roundup! – Kegerator and Fermentation – con…
• Bulk Keg Orings and Keg Repair Part Numbers