FREESEA Submersible Water PumpMore Info
From the product description, check product page for current description, price and availability:
- ★Smart control, dry running automaticly cut power.(Principle:Dry running opreation will increase motor temperature, then the pump will automatically shut down, but the motor will restart working after the temperature goes down. Therefore, when the motor automatically turned off we need to cut off power immediately. This function can effectively reduce the damage caused by dry running.）
- ★With bottom suction trainer,100% submersible.
- ★Maximum flow rate: 660GPH STRONG POWER and HIGH LIFT. Max Lift Height: 8.2 ft. 40W high efficiency motor for energy saving.
- ★Lift height is a max height the water goes up, after connecting the water pipe to the nozzle (Make sure the joint sealed se
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
FREESEA 160-1100 GPH Submersible Water Pump for Pond Aquariums Hydroponics Fish Tank Garden Fountain Waterfall – note that multiple variations of this pump may be available, as such a different version may show up at this link
Stainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs. Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post
More: Recent Amazon Finds
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.