Hands on Review: Used Ball Lock Kegs from MoreBeer

Hands on Review: Used Ball Lock Kegs from MoreBeer

MoreBeer’s Ball Lock Kegs Explained

MoreBeer has a bunch of ball lock keg options both new an used.  Most of those are self explanatory, but the used offerings can be a bit confusing.

A look at the keg.  It looks quite good.  Dirty, stickers still on it, but overall it’s in really good condition.Top down view


Rebuild It!

The keg offering featured in this review is the same keg featured in our step by step keg rebuilding and reconditioning how-to.


Should I buy a New Keg or a Used Keg?

Used kegs are generally sourced from soda bottlers.  They are built with commercial use in mind and designed to last for many years of rough duty service.

Brand new ball locks may not be made to the same standards.  However… We also don’t generally put our kegs through the same abuse that a soda distributor would.

Not withstanding price.  I think both options are valid.  If you’re up for a little elbow grease and replacing a few parts, used may be the way to go, if you’re more interested in convenience brand new is a good choice.  Practically, at least as of this posting, I think price will cause many to go the used route.

Commercial ball lock kegs are usually used by Pepsi distributors.  Hey, look what we have here.  This hold Pepsi pre-mix.  Side note… Pin lock kegs are usually used by Coke Distributors.  See: Ball Lock vs Pin LockA look at the gas in post.  This has a 6 point post.  Lots more about posts and points in our Craftsman Deep Well Socket ReviewSide view of the post.  The little notches at the base are an indicator that this is a gas post.If you zoom in, you can see that this is a Spartanburg Challenger VI.  If you’re looking to get specific replacement parts for your keg, this is how you do it.  Look for the manufacturer and model imprint on the keg.  That will allow you look up the specific posts and poppets.  O-rings are the same for all standard kegs.  See: Bulk Keg Orings and Keg Repair Part Numbers.  Cornelius/Corny is kind of like “Kleenex”.  It is a specific manufacturer that’s name has become synonymous with the category.  When you get a Corny Keg, it could be from a number of manufacturers.  Note that this photo also shows a dent.  That’s as bad is gets on this particular keg.  If you buy a used keg, expect dings and dents.  Again… these are tough tanks, they were built for regular commercial use.You can see that the PRV has been vented.  This keg came under pressure… a lot of pressure.  It took several seconds to vent.  Kegs arriving under pressure is a great sign.  It means the keg is leak free.If you look at the top of the lid o-ring, you can see that it’s really grimy.  No surprise, this is a raw keg.  Plan on cleaning, sanitizing and replacing all orings when you buy a used/non-rebuilt keg.  See: Bulk Keg Orings and Keg Repair Part NumbersA look at the underside of the lidA look inside the kegAnother look inside the keg.  Hey… it’s Pepsi!  This does have residual soda in it, but looks great.

Conclusions

This keg was in great shape.  It held pressure and had only one small ding.  It does need thoroughly cleaned along with a new set of o-rings.  Obviously, used kegs are a bit hard to review.  Yours will be different.  This is a look at one example keg, MoreBeer’s cheapest option KEG430.

One great thing about kegs at MoreBeer is that they fall under MoreBeer’s $59 free shipping program.  Many shops exclude kegs from free or flat rate shipping programs.  That’s a big bonus.

Availability of these kegs varies.  Check links below for current availability, description and pricing.

Should I buy a New Keg or a Used Keg?

Used kegs are generally sourced from soda bottlers.  They are built with commercial use in mind and designed to last for many years of rough duty service.

Brand new ball locks may not be made to the same standards.  However… We also don’t generally put our kegs through the same abuse that a soda distributor would.

Not withstanding price.  I think both options are valid.  If you’re up for a little elbow grease and replacing a few parts, used may be the way to go, if you’re more interested in convenience brand new is a good choice.  Practically, at least as of this posting, I think price will cause many to go the used route.

Rebuild Your Used Kegs

Keg Deals!

keg deals

Everything For Your Kegerator!

More Keg Reviews!

Food Grade Keg O-rings in Bulk!

bulk keg orings

 

More Homebrew Finds!

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

Special Thanks to MoreBeer for providing the unit used for evaluation in this review.

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.  review:b3blkeg tag:tpr

Leave a Reply