660 GPH Utility Pump by FREESEA + Draft Line Cleaning Builds
FREESEA Submersible Water PumpMore Info
- Intelligent Dry Heating Protection: The submersible water pump will stop from draining and pumping water, al long as the temperature reaches to 185 ℉(85℃), and the motor will restart working after the temperature goes down. This function can effectively reduce the damage caused by dry running.
- Low Water Level Design: The powerful suction at the bottom can pump water as low as 0.2 inches, and with the 360 degree water suction design, it can solve the problems of cleaning, while keeping water circulating all around.
- Adjustable Water Flow: Simple rotate the water flow valve to adjust the water flow rate and control water lift level, and the max flow rate can be up to 660GPH, the max lift height can be up to 8.2FT.
- Ultra Quiet Design: The aquarium fish tank pump comes with a duarable and corrosion-resistant ceremic motor which runs less than 20 decibels, offering a quiet environment. And it is easy to disassemble and clean.
- 12-month Warranty: Equipped with pure copper wiring, the small pond pump has a longer service life and is more energy savings. There's a 12-month warranty and 24 hours professional after-sales service, if you have any questions about the water pump you got, please feel free to contact us.
Make sure the components you use are compatible and rated for your intended application. Contact manufacturer with questions about suitability or a specific application. Always read and follow manufacturer directions.
I use a similar pump (different manufacturer, features and specifications) for a recirculating draft line cleaning setup. Note that fittings sizes are different on this pump vs the one I use in that build. Adjust accordingly Another possible homebrewing application would be to set this up for use a part of a recirculating wort chiller setup.
FREESEA 660 GPH 40W Submersible Water Pump for Pond Aquarium Hydroponics Fish Tank Fountain Waterfall – note that multiple variations of this pump may be available, as such a different version may show up at this link
Our Line Cleaning Builds:
- Build A Recirculating Draft Line Cleaning Pump
- Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion
- Building a Simple Ball Lock Draft Line Flushing Setup
Stainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs. Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post