Lyqily 740GPH Submersible Water Pump – Draft Line Cleaning, Potential Mark II Replacement & More

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Two-pin Plug Power Cord, 2 Nozzles

Lyqily 740GPH Submersible Water Pump Ultra Quiet 55W

More Info

From the product description, check product page for current description, price and availability:

Ultra-quiet Mini Submersible Pump Compact Multifunctional Detachable

SPECIFICATION
Max Flow Rate: 2800L/H
Max Lift Height: 2.6m
Power: 55W
Voltage: 110-120V/60Hz
Length of Power Cord: 1.8m
Dimension: 105mm x 66mm x 88mm

OPERATE
Neither clog up the entrance of the pump nor suck any dirty liquids.
Should the pump be used on a dirty surface, lift it a bit so that a contact with debris is avoided.
To lower the flood of water, use the control lever located on the side of the pump.
Immerse the pump into the water before connecting it to the plug.
At the very beginning, the pump may not work out properly as it might have some air inside,
So just take it off the water and immerse it again: it will surely work out.

PRECAUTIONS
Always disconnect the plug before handling the pump.
Do not use it without water.
Do not grab it using its cable.
Use only cold water.
Use the pump only if completely immersed.

UPKEEP
Remove the frontal part of the pump and the fan and wash them under flowing water.
Do not remove the drum of the pump.
Remove the frontal part and check that the fan runs the proper way.
Check the pump monthly and make sure the pump and its exit are free of obstruction.


 

Potential Uses:

Photo via Sourcing a Replacement Pump for Mark’s Keg and Carboy Washer

Lyqily 740GPH Water Pump Ultra Quiet 55W Submersible Fountain Aquarium Fish Pond Hydroponic Pump with 8.5ft High Lift, 5.9ft Two-pin Plug Power Cord, 2 Nozzles – note that multiple variations of this product may be available, as such a different version may appear at this link


Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Leave a Reply