MaltZilla Grain Mill Introductory Special
Maltzilla Diamond Roller Mill from William’s Brewing
The MaltZilla Diamond Mill has an integrated 24v Motor that can work on DC voltages from 12-30V. The higher the voltage the faster the mill will spin. We recommend 24v for optimum speed and grist results. All you will need is to choose a power supply (not included), whether it be the simple Alligator Clips to attach to a car or drill battery or the KegLand Transformer item X84.
The MaltZilla is the first mill to use diamonds impregnated into the surface of the twin 70 millimeter diameter rollers. Unlike knurled steel rollers, these diamonds will stay just as sharp as they were on day one, as they are harder than steel. The sharpness of the diamonds draws grain exceptionally well and even when hard products are used such as corn. Most mills require aggressive knurling to push into the grain and “chop” the grain as it passes through a tight gap. This often means your grains are chopped in half. The MaltZilla works on a different principle and gap setting is not as critical; impregnated diamonds to grip the surface of the kernel and the friction of pulling the grain through the gap causes a sheering action. This leaves the entire husk intact reducing the chance of stuck sparge and improving efficiency, while still opening the husk so the entire contents of the kernel are converted from starch to sugar. Click HERE for a picture of malt that has been milled in the Maltzilla.
The integrated 24 volt DC motor features an integrated gearbox. The high torque and sealed construction make it ideal for a brewing environment. The motor is sealed from moisture and grain dust, and integrated into the side body of the mill, and runs with less noise than traditional mill motors. Being DC the motor is safer than higher voltage AC especially in an environment where washing down the area with a hose is likely to happen.The motor is also reversible so the direction of spin can be changed based on the polarity. This is particularly useful for over-mount and under-mount installation.
The Maltzilla has multiple mounting configurations. It can be mounted on top of a board like most mills. You can also mount the mill under your counter where it’s concealed and out of the way except for its hopper hole which you fabricate. You can also choose the Maltzilla mounting board (item C86) if you don’t want to fabricate a mounting board.
Power Supply Not Included: A needed 24 volt DC power supply such as our item X84 or V89 (also used for the Cannular), or accessory cord (our item Z25) to attach to a 12 volt DC car battery or 18-20 volt drill battery, is not included. You can use either X84 or V89 Cannular power supplies; the Maltzilla does not require the higher amperage of the V89 supply, but will work with it just fine.
Grain Hopper Not Included: This unit does not come with a grain hopper as standard, and you will need to make a hopper from a 3 gallon or 5 gallon plastic waterbottle with its base cut off (see pictures above).
As part of an introductory special Williams is offering a free base. Just check the box on the product page to get yours.
Check sale or product page for current availability & pricing
Visit William’s Brewing – Web Only Clearance Sale
More: Recent William’s Brewing Finds
Price, promotions and availability can change quickly. Check the product page for current price, description and availability.