Announcing: The Dry Hopper – Oxygen Free Tri Clamp Dry Hopper!

The Dry Hopper - 1.5" Tri Clover Compatible

The Dry Hopper – 1.5″ Tri Clover Compatible

More Info

From the product description, check product page for current description, price and availability:

It’s finally here. After months of R&D, we feel we have the best no oxygen dry hopper on the market. Introducing The Dry Hopper from Brewers Hardware.

Dry hop without introducing oxygen into your fermentor? √
Dry hop while fermenting under pressure? √

This dry hopper allows you to dry hop or add any additions to your beer without introducing oxygen and oxidizing the beer. It also allows you to make additions to your beer fermenting under pressure without having to release the pressure. This helps stabilize your fermentation schedule resulting in better repeatability with batches, healthier fermentation, and less oxidation.

This dry hopper works by containing the addition inside of a sight glass and purging out the oxygen before dosing. By equalizing the pressure inside the sight glass and fermenter, you can add anything to your beer without degassing or depressurizing.



Weight: 8 lbs

Height: 12.5″ (Around 13″ with a gas QD connected)

Pellet Hops Capacity: Sight Glass Version – 4 ounces, Stainless Tube Version – 3.5 ounces

Pressure Rating: 15 PSI

With the included prv and corny gas post, you will be able to completely purge the chamber before dry hopping.

We know a lot of people have a 2″ TC port with fermentors so we added a 2″ x 1.5″ TC Cap Reducer with an extra 1.5″ clamp and gasket as an optional extra to make the dry hopper compatible. The dry hopper is pretty tall at 11.25″ so you may have trouble using it if your fermentor is inside of a refrigerator or tight place.

For instructions on how to set up and use the dry hopper for both non-pressurized and pressurized fermentation, check out our PDF instructions in the link above.

WARNING: Please be careful when using the dry hopper especially if fermenting under pressure. Removing the TC clamp holding onto the sight glass without pulling the PRV first can cause the sight glass to jump up as the pressure is vented out the bottom and cause damage to the tank or injury.


  • Limited Quantities are available, the 3″ TC version has already sold out.
  • Update: The 1.5″ TC’s have both moved to pre-order.  Shipping March or April, depending on which version you choose.  Order now to get in on the incoming shipment.

The Dry Hopper – 1.5″ Tri Clover Compatible

The Dry Hopper – 3″ Tri Clover Compatible – sold out, we’ll be keeping an eye on this, connect with HBF and we’ll let you know when it’s back.

Price, promotions and availability can change quickly. Check the product page for current price, description and availability.

Leave a Reply