Gas Flowmeter 2-20LPM [Assist with Wort Oxygenation]

Gas Flowmeter, LZQ-7 Flowmeter 2-20LPM Flow Meter with Control Valve for Oxygen Air Gas

Gas Flowmeter, LZQ-7 Flowmeter 2-20LPM Flow Meter with Control Valve for Oxygen Air Gas

More Info

From the product description, check product page for current description, price and availability:

  • INSTRUCTIONS:This gas meter is connected to hose to measure unidirectional gas flow
  • MADE OF HIGH QUALITY ACRYLIC:Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure
  • IT IS SIMPLE TO USE:It is simple to use, and has 8mm barbs for convenient connection to hoses
  • MEASURABLE GAS:Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon
  • MAINLY USED FOR:Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry

 

Most regulators that homebrewers use for oxygenating wort are simple setups – Example – via William’s Brewing.  They attach to disposable oxygen tanks (typically sourced from a local hardware store) and are little more than on and off valves.  No gauges, no pressure control (other than the degree to which you open and close the valve) and no flow control.

Time and rate give you an idea of how much oxygen you’re really adding to your wort.  Time is easy to track.  Rate, not so much, at least with typical homebrew O2 regulators.  If you want more or less oxygen for your next batch, it’s mostly a guessing game.

Enter an oxygen flow meter.  A flow meter, gives you an idea of flow rate

Gas Flowmeter, LZQ-7 Flowmeter 2-20LPM Flow Meter with Control Valve for Oxygen Air Gas – note that multiple variations of this product may be available, as such a different version may appear at this link


More Fermentation Related!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Leave a Reply