Stainless Carbonation Cap for PET Bottles

Stainless Steel Carbonation Cap Counter Pressure Bottle Filling with 5/16" Barb, Carbonation Beer Soda Water Brewed Beer

Stainless Steel Carbonation Cap Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer

Applications:

  • PET Bottles as Growlers: These are generally intended to convert 1L and 2L bottles to growlers.  Fill up a 1L or 2L PET bottle with your favorite homebrew.  Put one of these on (purge the headspace by squeezing if you want to) and then pressurize for transport.  This should help to reduce oxygen pickup and maintain carbonation levels.
  • Fine tune or rapidly carbonate beer: You can also use this cap to rapidly carbonate beer.  Same process as for transport, just set your regulator to the proper pressure and shake or agitate the PET bottle to help introduce CO2.  Or hook it up to CO2 and let it sit in you kegerator.
  • Draft Line Cleaning Projects:  I have developed two draft line cleaning projects using similar (but different) caps – Build A Recirculating Draft Line Cleaning Pump | Mark II Keg and Carboy Cleaner Draft Line Cleaning Pump Conversion

Stainless Steel Carbonation Cap Counter Pressure Bottle Filling with 5/16″ Barb, Carbonation Beer Soda Water Brewed Beer – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also Consider:

ball lock jumperStainless Steel Ball Lock Jumper with Food Grade Silicone O-Rings: Allows you to connect multiple ball lock runs to clean multiple lines and taps at the same time. Works with both liquid and gas QDs.  Stainless Steel Ball Lock Jumper – via Valuebrew – An easy add-on… food grade o-rings, featured in our Keg Rebuild Post

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Leave a Reply