Pressure Gauge – 0 to 100 PSI – by PIC Gauges + Step by Step Spunding Valve Build

PIC Gauge 101D-204E 2" Dial, 0/100 psi Range, 1/4" Male NPT Connection Size, Bottom Mount Dry Pressure Gauge with a Black Steel Case, Brass Internals, Chrome Bezel, and Plastic Lens

PIC Gauge 101D-204E 2″ Dial, 0/100 psi Range, 1/4″ Male NPT Connection Size, Bottom Mount Dry Pressure Gauge with a Black Steel Case, Brass Internals, Chrome Bezel, and Plastic Lens

More Info

From the product description, check product page for current description, price and availability:

  • Black Steel Case With Chrome Bezel
  • Brass Socket And Movement
  • Phosphor Bronze Bourdon Tube
  • Dry Non-Fillable
  • 3-2-3% Accuracy

 

 

A potential homebrew application for this is to use it as part of a Spunding Valve Build.   A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: [Build a Spunding Valve].

PIC Gauge 101D-204E 2″ Dial, 0/100 psi Range, 1/4″ Male NPT Connection Size, Bottom Mount Dry Pressure Gauge with a Black Steel Case, Brass Internals, Chrome Bezel, and Plastic Lens – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


Also: Build a Spunding Valve

This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.

Leave a Reply