8 Universal Poppets AND Spare O-Rings – $9.99, $1.25 Each + Free Prime Ship & Installation Tip

8 PCS Poppet Valve,Universal Poppet Valve,Keg Poppet Valve,Ball Lock Poppet Valve,Pin Lock Poppet For Homebrewing (8 PCS)

More Info

From the product description, check product page for current description, price and availability:

  • Well Made & Great Quality: The keg post poppet is stainless steel. The O-ring is made from food grade silicone. It features an anti- corrosion/ heat resistance/ environmental that can last a lifetime
  • Will Send The Extra O-ring: We will free send 8 pieces the o-ring. The washer on poppet valve will be broken after long time using. If broken, the poppet valve will leaks.So need you replace it
  • Seal Well: The keg poppet valve has adequate spring force to seal under pressure.No air leak, no beer leaks
  • Fit For Ball-lock: Keg The universal poppet is used for gas posts/ liquid posts/ ball lock kegs/cornelius kegs/corny keg/soda keg.Use our stronger keg poppets to replace a hardened and leaking poppet

 


Related: Source for Food Grade Silicone Universal Poppet Replacement O-rings!  Universal Poppet Replacement O-Rings – Food Safe Silicone via Valuebrew – note because of variations in design and multi vendor fulfillment, there is no guarantee these will fit every design.  According to the product description they are dash 008 size.  It’s great these are food grade.  Food rated o-rings are tough to find and this is one point that gets a lot of contact with your beer.  Full lineup of food grade o-rings at Valuebrew

Related: Keg Repair Parts and O-Rings Roundupsearch “universal poppet” on Amazon to look for more offerings


I use universal style poppets exclusively when rebuilding kegs.  Tip: Universal poppets fit the vast majority of kegs without issue.  I have had a couple kegs that ended up being a bit too tight with these.  It’s an easy fix.  Use a pair of wire cutters or Nipper Pliers to trim the universal poppet.  I suggest taking off about half of a coil and testing.  You want the QD to slide on easily and for it to reliably hold pressure when the QD is off.  Taking off a half of a coil and testing helps you make sure you don’t end up making the poppet too loose.

9/15/20 9:30 PM Central: These have dropped to $9.99.  That figures to just $1.25 each.  Shipping is also free to many US addresses with Prime Membership [Try Prime for Free] or a qualifying orderPrices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit Amazon. Check the product page for current price, description and availability. Also: Recent Amazon Finds and Amazon Fillers Resource Page 

8 PCS Poppet Valve,Universal Poppet Valve,Keg Poppet Valve,Ball Lock Poppet Valve,Pin Lock Poppet For Homebrewing (8 PCS)


Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

More: Recent Amazon Finds

Leave a Reply

Your email address will not be published. Required fields are marked *