Room Temperature Kegging – Kegging WITHOUT a Refrigerator or Freezer?

kegging no refrigerator

I periodically get questions along these lines… can I keg without a refrigerator?

Well, the answer is, sure you can.  But, as with many things, just because you can do something, doesn’t mean you should.

Balancing an Un-chilled System

The warmer your beer is, the less apt it is to absorb CO2.  As temperature rises so does the pressure required to maintain carbonation.  Let’s say your storage area is your basement and it stays at about 64 degrees Fahrenheit and you want something like 2.2 volumes of carbonation.  A reasonable carbonation level for an American ale,  Considering this example, you’d need to keep your CO2 regulator set to about 18 PSI.  If you use 3/16″ ID tubing, you’d need somewhere between 6 and 12 feet of tubing [See: Step by Step Balancing Your Kegerator Draft System] to offset that pressure for a decent pour.  I haven’t tried it, but my gut feeling is you’d be closer to 12 feet if not more.  Lots of tubing.  If there’s much of a temperature differential between the bottom and top of the keg, it may result in CO2 coming out of solution in that long length of tubing, causing excessive foaming, even if your system is balanced.  This can happen even in a chilled kegerator [See: Kegerator Beer Line Temperatures & Reducing Foam with a Recirculating Fan] so it’s certainly a possibility for a room temperature setup.

Of course you can tweak this scenario with different numbers and maybe it looks better for you.

Temperature Swings = Bad Pours

If temperature varies in the spot that you’re keeping your un-refrigerated keg the setup will be even more temperamental especially at points when it’s warmer.  Something like.. It’s hot outside today, my beer is going to be all foam.

Why?

Why do it?  I’m sure some people are doing this and it’s great.  They like warmer beer at lower carbonation levels.  If that’s you, awesome.. good for you!  If not, I’d say pass,  Stick with bottling until circumstances allow for a complete kegerator setup with chilling capabilities.

No Chill and No CO2 Kegging

Let’s take it a step further… I’ve also gotten this question – Can I keg without a refrigerator and without CO2?  Well, maybe.  You can prime and naturally carbonate a keg.  One big issue with this is a lot of kegs don’t fully seal without pressure.  So, you may need at least a small CO2 source to seal the lid.  Beyond that, you’ve got the same issues outlined above with the additional problem of not having pressure to serve your keg.  This beer is going to be relatively warm and as it’s served using pressure generated via natural carbonation it will become less and less carbonated.  This can happen to the point that it may not completely vend under pressure.

Conclusions

Can you do it, yes.  Should you do it?  Probably not.  My general recommendation is going to be the same as above… Stick with bottling until circumstances allow for a complete kegerator setup with chilling capabilities.

A New Option…

kryo inline draft beer chiller

Since this post was written MoreBeer has released KRYO Inline Beer Chillers. These allow you to serve draft beer without a kegerator. These will not be a reasonable solution for those looking save money, but they are a new option for those looking to save space.

Two Spots to Look for Kegging System Deals


This article contains affiliate links. We may make a small percentage if you use our links to make a purchase. You won’t pay more and you’ll be supporting Homebrew Finds and more content like this. Thank you for your support!


Keg Deals!

keg deals

Additional Resources and Related Products

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources!

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

This is a Top Post! See: All Top Posts

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions.    toppost:nokegkegging tag:tpr

Leave a Reply