Tip: Using Undiluted PBW to Help with Bottle Label Removal

beer bottle label removal

Part of Our Homebrew Tips and Tricks Series.  Check out the complete list – Homebrewing Tips, Tricks & Shortcuts!


  • Soaking your bottles in hot PBW is not a new technique.  It works well and I would venture a guess that a lot of homebrewers do this.
  • Here’s the tip… If you have a label or bits of adhesive that are being stubborn,   Put a little bit of PBW right on a label or adhesive that’s giving you problems and scrub.  The grittiness of the PBW combined with it’s full strength application generally dissolves the label and adhesive in short order.
  • PBW can be rough on your hands when diluted.  That’s even more true when it’s undiluted.  I recommend using protective gloves when dealing with PBW.
  • Search Amazon for “elbow length cleaning gloves”
  • Search Amazon for “PBW Cleaner”
  • Search Amazon for “scrub pads”
  • Search MoreBeer for “PBW”
  • Related Categories: BottlingCleaning

My PBW Quick Pick!

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Make sure the components you use are compatible and rated for your intended application.  Contact manufacturer with questions about suitability or a specific application.  Always read and follow manufacturer directions. rp:tips#24

Leave a Reply