Jaybird KRAUSEN CATCHER with Grommet for Wide Mouth Canning JarsMore Info
From the product description, check product page for current description, price and availability:
- Prevent plugged airlocks or blow-off tubes during fermentation!
- No evaporated air lock! No backflush of sanitizer into your product!
- Think of this as a GIANT airlock… with all of the benefits and none of the draw-backs of small plastic airlocks!
- DAISY CHAIN this with our 4 NIPPLE version to create a CO2 harvesting, back flow-preventing airlock
- Made in USA by NorCal Brewing Solutions
Jaybird Krausen Catcher with Grommet for Ball, Kerr, or Mason Wide-Mouth Jar. The ultimate airlock enhancement / blow-off tube! Fixes ALL kinds of airlock issues by providing sturdy hose attachments, a lid-sealed containment system, and the ability to attach 1/2″ hoses to its 2 tube connections, plus a 3-piece or “S” shaped airlock to its grommet! Think of this as a GIANT airlock / blow-off tube… with all of the benefits and none of the draw-backs! You need a couple of feet of 1/2″ inner diameter tubing, a 3-piece or “S” shaped airlock, and a wide mouth Kerr, Ball, or Mason jar (not included) in the 16, 32, or 64 ounce size. DAISY CHAIN THIS WITH OUR 4 NIPPLE VERSION OF THE KRAUSEN CATCHER to create a CO2 harvesting, back flow-preventing airlock! USAGE INSTRUCTIONS: 1. Fill a wide-mouth canning jar with the proper amount and mix of sanitizing solution. 2. Place a length of tubing over one of the “inside” nipples of the Krausen Catcher. Tube length should be long enough to “almost” reach the bottom of the canning jar once canning jar lid is attached to jar. 3. Place Krausen Catcher on canning jar and tighten the canning jar’s lid over the Catcher. 4. Attach a half-inch inner diameter hose over the same-side outside nipple on the Krausen Catcher. 5. Run the other end of the hose to the CO2 exit port of your fermenter. 6. Fill a 3-Piece or “S” shaped “double bubble” airlock with sanitizer solution. 7. Attach airlock to grommet on Krausen Catcher. CHARACTERISTICS and SPECIFICATIONS: All metal components are 304 Stainless Steel. 1/2″ tubing connects to the 2 nipples. Any standard 3/8” diameter airlock attaches to grommet. Works with any “wide mouth” (3-inch inner opening) Ball, Kerr, or Mason jar. Jar, screw lid, airlock, hose, etc. are for illustration purposes only (not included). THE LAST PICTURE: The Krausen Catcher with Grommet is shown in the left half of the picture, connected to a canning jar and airlock in a CO2 HARVESTER configuration.
Jaybird KRAUSEN CATCHER with Grommet for Wide Mouth Canning Jars – note that multiple variations of this product may be available, as such a different version may appear at this link