Inline Regulator via William’s Brewing. About: “This in line regulator features 1/4″ hose barbs, and can be adjusted with a flat head screwdriver. It can reduce incoming pressure from 150 PSI to 1 PSI. It is very handy to use when you want to use a single output C02 regulator in a draft system, but supply different kegs with different dispensing pressures. 4.75″ long with included brass hose barbs installed.” The product page has a video with more info.
This is basically an inline secondary regulator. You still need a primary regulator attached to your CO2 tank. The idea is, you set the primary to the highest pressure you will use (without exceeding specifications of any component of your system) and then use these regulators inline (one per line) to fine tune pressure and carbonation [See: Balancing Your Draft System]. As an example, you could set your primary to 25 PSI for faster force carbonation and set each line to a different pressure based on desired carbonation level.
As of this posting, William’s Brewing is discounting a large selection of gear for Black Friday… William’s Brewing Black Friday! These great faucets are included in the mix and marked down to just $3.99! Check William’s for current availability.
Update: This promo has expired or pricing, availability or description has changed – Check the supplier’s site or product page for current availability
Recent Deals! Last Fifty Finds
Our Top Draft Resources prod:wmsinline