Announcing: The SPUNDit – Advanced Spunding Valve!

SPUNDit Spunding Valve: Fermentasaurus, Fermzilla, Snub Nose, Picobrew, Unitanks

SPUNDit Spunding Valve: Fermentasaurus, Fermzilla, Snub Nose, Picobrew, Unitanks

More Info

From the product description, check product page for current description, price and availability:

A spunding valve is used to adjust and release CO2 pressure of a fermenter/keg during fermentation or filling/filtering. Essential for pressure fermentation with Unitanks, Fermentasaurus, Williams-Warn BrewKeg, Blichmann Conical Fermentor/Keg and Pot-au-Brew.

Australian Homebrewers: now available at KEG-KING in MELBOURNE

Pressure fermentation is the new hot thing in homebrewing for many good reasons. To do that, you need a fermenter pressurizable to at least 30 psi and a spunding valve to maintain 5-15 psi pressure during fermentation.

Introducing SPUNDit – an advanced spunding valve with unique features:
Precise & accurate
CO2 capturing capability
Fine adjustment with 0-30 PSI pressure gauge
Anodized aluminum main body (NEW & upgraded)
One push-to-connect (PTC) 6mm OD IN port with plug
One PTC 6mm OD OUT port
Stainless steel ball lock straight (non-angled) – a $20 value by itself! The angled disconnect just looks so goofy for this part. So this is your chance to own a stainless steel disconnect finally … and a SPUNDit.
Industrial grade diaphragm pressure relief valve – specifically configured for homebrewing, not hardware store stuff.
Compact design with finger-tight swivel 1/4″ female flare fitting for convenience & mounting versatility (NEW & exclusive!).
Made in USA
Another innovative product of HomeBrewerLAB.com
What you can use SPUNDit for:
Pressure fermentation
Pressure fermentation for 2 kegs at the same time
Precise control of the pressure of your serving kegs
Pressure transfer from primary to secondary
Counter pressure bottle filling WITHOUT a need for “two product dual pressure regulator”
Keg purging with CO2 from active fermentation*
Feed you homegrown cannabis or indoor herb grow box
On-keg pressure gauge & injecting CO2 through SPUNDit’s auxiliary port
Carbonate your beer precisely
Make Fermentasaurus, FermZilla, BrewKeg, Conical Fermentor better. Their built-in poppet PRV is not designed for fine adjustments.


A Spunding Valve allows you to ferment under pressure, naturally and precisely carbonate in the keg, fix over-carbonated beers and lots more. See: Build a Spunding Valve – for loads of information on building and using a Spunding Valve.

In my opinion… You should also take a hard look at….

As if this posting, this is eBay offering is selling for $54.99. Shipping is also free to many US addresses.  Prices, shipping and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability.

SPUNDit Spunding Valve: Fermentasaurus, Fermzilla, Snub Nose, Picobrew, Unitanks

Homebrew Finds is Spunding Central!

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Leave a Reply