Robobrew V3 All Grain Brewing System with Pump – 9.25G via Brewer DudeMore Info
From the product description, check product page for current description, price and availability:
We’re excited to announce the coming release of the Robobrew BrewZilla! This 65L version of the popular Robobrew is perfectly sized for brewing 10-gallon batches. The BrewZilla will be available for prebook soon, so check back often, or click the button above to be notified when the item is in stock.
All in one brewing systems with recirculating pumps are where it’s at. They make brewing simple and easy and get homebrewers doing all-grain earlier, many starting with their very first batch. The Robobrew series is leading the charge with its amazing price point.
The Robobrew BrewZilla is an all-in-one electric brewing system that has built in elements for heating and boiling, a built-in pump for recirculation, an onboard water-resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built-in spigot for transferring. It is easy to move and store when not in use, making it a great option for brewers with space constraints.
This very capable 15amp brewery has over 3 kilowatts of power that can get wort up to boil in no time. 220V outlet required! The BrewZilla has been made with ultra-low watt density elements, which means less caramelization and also makes this unit capable of producing very light beers with very little maillard effect. This is also particularly useful for high gravity beers that can get some degree of scorching in other electric breweries with higher watt density.
Triple heating elements run off of a single 220 volt plug and have individual switches allowing for more control over the heating process. The elements are 2000, 1000 and 500 watts for a combined 3500 watts! Use all three when you need to ramp up the temperature, either to quickly get to your mash temp or to rapidly go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.
Built in magnetic drive pump to easily recirculate the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the pump to transfer your wort to your fermenter.
The digital control panel makes it easy to see the current temperature and set the temperature you want. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. The digital controller is also water resistant so don’t worry about spills or some water dripping down the side. This controller is built for brewing!
The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the unit and tabs at the base so you can set the malt pipe over the BrewZilla to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.
The included stainless wort chiller is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings sold to help connect to a hose, hose bib, or faucet.
- Stainless steel construction
- 16 gallon total capacity with a finished beer output of 10 gallons
- Digital temperature controller
- 220v power and plug
- Triple heating elements for total control (2000, 1000 and 500 watts)\
- Stainless steel 1/2 in ball valve for draining (don’t have to use the pump)
- Immersion wort chiller included
- Stainless steel malt pipe/basket
- Stamped in volume markers
- Glass lid
- Magnetic drive pump for recirculation
- Recirculation arm
- Temperature reads in °F or °C (press and hold temp button for several seconds to adjust)
- Approximately 36″ H (with recirculation arm) x 16″ D
Although this is a pre-order system, my guess is that it will be a MAP item. MAP = Minimum Advertised Price. That means that this will generally sell for about this price and will be rarely discounted. Check product page for up to the minute price, description and availability.
As of this posting, Brewer Dude has this system available for pre-order for $699.99. Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability
Works With: As of this posting, Brewer Dude is giving you 6% back on every single thing, storewide, excluding gift certificates. Check the promotions page for details and availability. That means you can get a deal on this just announced, yet to be shipped system that, most likely, will be a MAP item. Whammo!