Beverage Doctor pH Meter via William’s Brewing
From the product description, check product page for current description, price and availability:
A quality, water resistant pH meter with triple point calibration, affordable replaceable electrode, automatic temperature compensation, and a water proof cap with a unique sponge storage solution retainer.
Digital Triple Point Calibration
Most pH meters only have single or double point calibration. This means they can only be calibrated at 4.0 and 7.0 pH. This meter has triple point calibration, which means it can also be calibrated at 5.5 pH for greater midrange accuracy. No manual calibration -just put the PH meter into the buffer solution that comes with it andthen hit the calibration button.
Affordable Replaceable Electrode
Home brewing puts a lot of stress on the electrode, and electrodes only last for a few years. Especially if you are testing hot wort directly from your mash tun. If you know anything about PH meters you will know that the electrodes are not difficult to damage in a brewing environment and have a tendency to fail over time. Why spend all this money on a good quality pH meter if you can’t replace the electrode? Unlike other units, the replacement electrode does not cost almost as much as the meter.
Includes Calibrating Buffer Solution
This includes 3 packs dry concentrate buffer solution, for calibrating at 4.0 pH, 6.86 pH, and 9.18 pH. Just add deionized or distilled water and store in a glass jar and the solution will last 3 months. We also recommend you purchase Storage Solution (not included, you will be given a chance to buy this when you put this in your cart).
Automatic Temperature Compensation (ATC)
Any good quality PH meter you get will include ATC. This additional feature means the probe needs to have a small temp probe at the end so it can compensate for high or low temperatures. Lets face it, you are not going to wait for your wort sample to cool down to 68° F.
Water Proof Cap
The main reason why PH meters fail over time is because the electrode dries out. If your PH meter is left with a dry probe the storage solution evaporates through the glass membrane. Unlike most meters, the cap on this meter has an o-ring and is water tight. In addition, it has a small sponge on the bottom to hold Storage Solution. To keep your electrode in best possible solution we recommend you clean with water then store in Storage Solution inside the cap . This will keep your readings accurate for several years.
As of this posting, William’s has this on sale for $44.99. Price, promotions and availability can change quickly. Please note that product prices and availability are subject to change. Prices and availability were accurate at the time this this post was published; however, they may differ from those you see when you visit the product page. Check the product page for current price, description and availability
Visit William’s Brewing – Web Only Clearance Sale