Micro CO2 Regulator w/Stainless Ball Lock QD – $59.99 + Hands on Review

BALL LOCK MICRO REGULATOR

Ball Lock Micro CO2 regulator  from William’s Brewing.  About: “The Brewer’s Edge® Micro Regulator combines the precision of a Mini Regulator, with the portability of a simple gas injector. Featuring a 0-30 PSI range, precisely adjustable with the calibrated top knob. Best of all, it takes all standard 16 gram threaded and 74 gram threaded C02 cartridges, so you have the choice of a lightweight compact unit with the 16 gram, or a high capacity unit with the 74 gram cartridge.”

More Info

“Features a 0-30 psi C02 regulator that features precise adjustment via the calibrated top adjustment knob. It features a inline stainless check valve between the regulator and the ball lock fitting to protect it from backflowing beer. With this 0-30 PSI model, you can both dispense and force carbonate. Fits ball-lock kegs and only weighs 9 ounces.

The flared outlet on the side that goes to the stainless ball lock fitting can be unscrewed and leaves a 1/8″ female NPT port. Into this port you can screw any 1/8” NPT male thread hose barb or threaded outlet.

The regulator does not include a pictured cartridge, you will be offered a chance to order these when you put this in your cart. Note that C02 cartridges cannot be shipped by air or express, and cannot be shipped outside the lower 48 states due to aviation and postal regulations.

 

Check out our review: Hands on Review: Brewer’s Edge Micro CO2 Regulators – Serve Your Beer On The Go

As of this posting, this is selling for $59.99.  Check site for current availability.

Also: Kegerator Tips & Gear | Keg Repair Part #s | Recent Keg Finds

Our Top Draft Resources

This post may contain affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

Visit William’s Brewing – Web Only Clearance Sale

3 thoughts on “Micro CO2 Regulator w/Stainless Ball Lock QD – $59.99 + Hands on Review

Leave a Reply