Stainless Steel 3/4″ to 1/2″ Reducer for Center Inlet Chugger Pumps

Stainless Steel Reducing Coupler for Chugger Center Pumps

Stainless Steel Reducing Coupler for Chugger Center Pumps

More Info

From the product description, check product page for current description, price and availability:

This is a 304 grade stainless steel reducing coupler with 3/4″ FPT x 1/2″ MPT threads. Great for March Pumps with a 3/4″ center inlet. Has a wide hex nut for easy secure tightening.


 

1/2″ fittings seem to be pretty standard for homebrewers.  Center inlet Chugger Pumps are a little different compared to most high temp homebrew pumps with regards to fittings.  Most homebrew pumps are 1/2″ NPT threads on both the “in” side and the “out” side.  The center inlet pump is 1/2″ NPT on the “out” side and 3/4″ NPT on the inlet side.  Some people want this to be 1/2″ also, so a fitting is required.

This fitting is nice because it is female to male.  A lot of ball valves are female, so this would allow you put a female threaded ball valve on without the aid of another fitting.

Stainless Steel Reducing Coupler for Chugger Center Pumps – affiliate link, note that multiple variations of this product may be available, as such a different version may appear at this link


This post contains affiliate links. We may make a commission when you use our Amazon links. This will never cost you extra. Thank you for supporting Homebrew Finds!

rp:chuggerreducer

Leave a Reply