Pair of Beer & Gas Tubing Quick Disconnects with Shutoff – $10.99, Limited Availability

Beer & Gas Quick Connect - In-Line Set (With Shut-Off) H550

Beer & Gas Quick Connect – In-Line Set (With Shut-Off) from MoreBeer


From the product description, check product page for current description, price and availability:

Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines. Uses might include the following:

  • On a gas system to unhook your tank and regulator from your manifold so you take it with you.
  • On a beer line to easily switch between ball lock, pin-lock, or a commercial tap
  • On a counter-pressure bottle filler to be able to easily connect to your existing gas line.

This plastic quick disconnect set features 1/4″ barb which can be used with tubing ID 3/16″ through 5/16″. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi – so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n.


These quick disconnects have an integrated shut off valve.  When you disconnect them valves engage so beer or CO2 don’t continue to flow.  I use similar disconnects for the CO2 side of my kegerator.  They also work on the liquid side.  These are food grade.

Limited Availability Deal of the Day: As of this posting, this is marked down to $10.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Beer & Gas Quick Connect – In-Line Set (With Shut-Off) H550

MORE MoreBeer Deals!…This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!


Leave a Reply