The Barley Crusher Malt Mill – $129.99 + Free Shipping, Limited Availability & Hands on Review!

The Barley Crusher Malt MillThe Barley Crusher via MoreBeer

More Info

From the product description, check product page for current description, price and availability:

The Barley Crusher has a long history of reliable use and is constructed using materials that will last a lifetime. The Barley Crusher uses 1018 Cold Rolled Steel for the rollers, 6061 Aluminum for the mill body and hopper, tool steel for the axles with Oil Impregnated bronze bushings.

Mill Features:

  • The gap default setting is marked and set at .039 at assembly. Adjustment range is from .015 to .070 thousandths of an inch.
  • The standard hopper holds an even 7 pounds.
  • Can be used with the Hand Crank or attached to a 3/8 in. drill motor. (No adapter is needed to operate the mill using a 3/8 in. drill motor)
  • Comes with a solid base with locators to center the Barley Crusher on a 5 or 6 gallon plastic pail. (Pail not included)
  • Using a 3/8 drill motor at 500 RPM gives you a crush rate of 6 pounds a minute making the big grain bills fast and easy.

 

Motorize It!  Barley Crusher & Cereal Killer Motor Kit

I’ve used a Barley Crusher for years.  It’s a great mill

Limited Availability Deal of the Day: As of this posting, this is marked down to $129.99 as a MoreBeer Deal of the DayShipping is also free to addresses in the contiguous US with most $59 Orders. Availability: This is available today only, while supplies last. Quantities are limited. Check the MoreBeer’s Deal of the Day to check today’s offering.

Product Description – Here – Use coupon code BEERDEAL to get this discount.

The Barley Crusher Malt Mill MILL500

Shop Around!

Hands on Review!

Hands on Review: Barley Crusher MaltMill!

MORE MoreBeer Deals!…This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!

3 thoughts on “The Barley Crusher Malt Mill – $129.99 + Free Shipping, Limited Availability & Hands on Review!

  1. Mike Salsbury

    I’ve got one of these and although I only used it once so far (believe me, it’ll see more use), I am very happy with it. Assembly was easy, usage is really simple. Even hand-cranking the thing, it didn’t take long to crush enough grain for a whole batch of beer… and the beer turned out well, too. Recommended product.

    Reply
  2. da kine

    I have written it before and will do so again: I have put many hundreds of pounds of grains through this mill with only one problem, and it turned out the problem was that I had my drill set to reverse (i.e, my own stupidity). This is a steal. Once you buy in bulk, you’re paying maybe 40% the price of retail, so you’ll make your money back after a few brews.

    Reply

Leave a Reply