Efficient 25′ Copper Immersion Wort Chiller – $52.95 + Free Shipping, Limited Supply

Immersion Wort Chiller (Efficient) - 25 ft. x 3/8 in. WC20A

Efficient 25′ Immersion Wort Chiller from MoreBeer.  25′ of 3/8 Copper Tubing.  8 Foot (both in and out) vinyl tubing.  Includes female garden hose fitting.

From the description: “During the manufacturing process we build in an inner water turbulator that causes the cold water to spin through the coil. This reduces the laminar flow found in a standard wort chiller where only the outer water is cooled as it travels through the coil. The result is a 40% reduction in water, and faster cooling, when compared with our standard chillers. ”

Product Description – Here – Use coupon code BEERDEAL to get this discount.

Availability: This is a More Beer Deal of the Day. Quantities are limited. Check the Deal of the Day section Here to see if this is still available.

Immersion Wort Chiller (Efficient) – 25 ft. x 3/8 in. WC20A – $79.99 $52.95 + Free Shipping

More about the WC20A from MoreBeer

Save water during the cooling process with our Super Efficient Immersion Wort Chiller. During the manufacturing process we build in an inner water turbulator that causes the cold water to spin through the coil. This reduces the laminar flow found in a standard wort chiller where only the outer water is cooled as it travels through the coil. The result is a 40% reduction in water, and faster cooling, when compared with our standard chillers. But that is when we compare it to OUR standard chillers with the coils at the top. When you compare to other chillers on the market the results are even better.

ALL of our chillers feature coils that raised up to where the heat is. As we learned in school heat rises so when other wort chillers have all the coils on the bottom they actually never cool unless you stir your wort. The problem with stirring is that you mix up all your trub/sediment and you risk airborne contamination… neither of which is good. Our chillers cool fast and allow you to keep your lid on your kettle during the critical cooling period.

Constructed from 25′ of 3/8” copper tubing. 8′ of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Use our CE20 hose thread adaptor to attach to your sink. Perfect for a kitchen environment where the sink is close by.

This size chiller is ideal for our 8 Gallon Heavy Duty Kettles!

The measurements are: Approx. 10″ diameter, 8″ to the top coil, 15″ to the bend to go over the lip of the kettle.

MORE MoreBeer Deals!…This post contains affiliate links. We may make a commission when you use our links. This will never cost you extra. Thank you for supporting Homebrew Finds!



prod:wc20adod

Leave a Reply