More Beer’s Beer and Wine Plate Filter Kit in action
First… Why would you want to filter your beer?
- You want to drink your beer soon. During conditioning, a lot of what we’re doing is waiting for stuff to fall out of suspension. Filtering hastens that process.
- You want to transport your kegged beer. Transporting your beer stirs up anything that’s in the bottom of the keg. Filtering means you don’t need to worry about stirring a bunch of stuff up.
- Clarity. You’re interested in having great clarity for a particular style of beer.
- You have a problem with your beer. Filtering down to the sterile filter level may remove off flavors. That’s a maybe.
The process for filtering beer is basically…
- Assemble the unit and hook up tubing.
- Run 1 gallon of water through the plate filter.
- Run Star San through the filter.
- Filter your beer.
Instructions say to expect the whole process to take about 45 minutes. I’d say that’s about right. The process was a breeze. I was able to multi task and get other things done around the brewery during this process.
Here is the complete unit with tubing and disconnectsThe fasteners on this plate chiller tighten by hand.
Notches are designed to make assembly quick.One side removedThe center ring. This takes two filter pads. One on each side of this ring.Pads are available in rough, polish and sterile. You need to work sequentially through these. Sterile is only recommended in the case that your beer has flaws. That filter strips quite a bit of out of your beer. I only used the rough filter in my test. I was very happy with the clarity that the rough filter produced.The whole thing sandwiched togetherI fermented this 5 gallon batch in a 10 gallon Cornelius keg. You can see that inside the deep freeze. I hooked the filter directly up to the fermenter and sent the beer right to the receiving keg.Here’s the used filter.Here’s what’s left in the fermenter.This beer was just sitting on the muck in the bottom of my fermenterCrystal clear homebrewHere’s the bottom of the keg after the beer was consumed. As you can see… no trub at all.
This setup does what’s it supposed to do. It’s easy to set up and easy to use. It adds a little bit of time to the kegging process, but you can do other things during that process. It’s nice to have the option to filter when the situation presents itself.
- Beer and Wine Plate Filter Kit FIL45B
- Beer and Wine Filter Pad (Rough) – Pack of Two FIL46
- Beer and Wine Filter Pad (Polish) – Pack of Two FIL47
- Beer and Wine Filter Pad (Sterile) – Pack of Two FIL48
More MoreBeer Reviews+Related:
More Homebrew Finds!
- Last 50 Finds!
- Top Deals – a curated list of the best deals
- Homebrew Reviews – one of the largest libraries of homebrew reviews in existence!
- Our Top Posts – tips, how-tos, resources posts and more